[PATCH 07/10] mtd: spi-nor: add mtd_is_locked() support

[Brian Norris]

On Thu, Oct 01, 2015 at 02:30:40PM +0530, Jagan Teki wrote:
> On 2 September 2015 at 01:27, Brian Norris <computersforpeace at gmail.com> wrote:
> > This enables ioctl(MEMISLOCKED). Status can now be reported in the
> > mtdinfo or flash_lock utilities found in mtd-utils.
> >
> > Signed-off-by: Brian Norris <computersforpeace at gmail.com>
> > ---
> >  drivers/mtd/spi-nor/spi-nor.c | 37 ++++++++++++++++++++++++++++++++++++-
> >  include/linux/mtd/spi-nor.h   |  3 +++
> >  2 files changed, 39 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> > index 62fa1b4ff3c0..c4fb1205f1d3 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
[...]
> > @@ -1151,11 +1184,13 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> >         if (JEDEC_MFR(info) == SNOR_MFR_MICRON) {
> >                 nor->flash_lock = stm_lock;
> >                 nor->flash_unlock = stm_unlock;
> > +               nor->flash_is_locked = stm_is_locked;
> >         }
> >
> > -       if (nor->flash_lock && nor->flash_unlock) {
> > +       if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) {
> >                 mtd->_lock = spi_nor_lock;
> >                 mtd->_unlock = spi_nor_unlock;
> > +               mtd->_is_locked = spi_nor_is_locked;
> 
> Need some understanding here, is this lock status call will be re-used
> at the time of _erase and _write calls for skipping locked area or
> sectors, if so how it re-used? Idea here is if user erase an area
> out-of which some part is locked and other unlocked the erase call
> should print the locked area and erase only unlocked area.

You can review the existing lock support in MTD to answer most of
this...

Currently, the lock APIs (mtd_lock(), mtd_unlock(), mtd_is_locked())
aren't automatically used for anything. They are mostly just supported
to provide an ioctl() interface, via MEMLOCK, MEMUNLOCK, MEMISLOCKED.
See mtdchar.c. These ioctls are supported in mtd-utils, so user programs
can handle the locking aspects on their own, if their system design
requires it. (e.g., this allows boot ROMs to be protected, while still
allowing unlock/reflash under specific circumstances.)

As it stands now, no one checks or reports errors if a block is locked
when the user tries to erase it. I guess it's up to the user to figure
that out right now.

I don't have a plan to change this right now, but if you had a good
proposal, then we could discuss. At first glance, I don't like the
suggestion to "print the locked area." That's not the right (primary)
way to report I/O errors. Anyway, that's all orthogonal to this patch.
The interface is already there; it's just not implemented in this
driver.

Brian