[PATCH (v4) 2/2] mtd: brcmnand: Add support for the BCM63268
Jonas Gorski
jogo at openwrt.org
Mon Nov 23 10:42:41 EST 2015
On Sun, Nov 22, 2015 at 11:17 PM, Simon Arlott <simon at fire.lp0.eu> wrote:
> The BCM63268 has a NAND interrupt register with combined status and enable
> registers. It also has a clock for the NAND controller that needs to be
> enabled.
>
> Set up the device by enabling the clock, disabling and acking all
> interrupts, then handle the CTRL_READY interrupt.
>
> Add a "device_remove" function to struct brcmnand_soc so that the clock
> can be disabled when the device is removed.
>
> Signed-off-by: Simon Arlott <simon at fire.lp0.eu>
> ---
> On 22/11/15 21:59, Rob Herring wrote:
>>> >> + * "brcm,nand-bcm63268"
>>> >> + - compatible: should contain "brcm,nand-bcm<soc>", "brcm,nand-bcm63268"
>> >
>> > vendor,<soc>-device is preferred.
>
> The existing two bindings use brcm,nand-<soc>, but I've changed this one.
>
> drivers/mtd/nand/brcmnand/Makefile | 1 +
> drivers/mtd/nand/brcmnand/bcm63268_nand.c | 174 ++++++++++++++++++++++++++++++
> drivers/mtd/nand/brcmnand/brcmnand.c | 3 +
> drivers/mtd/nand/brcmnand/brcmnand.h | 1 +
> 4 files changed, 179 insertions(+)
> create mode 100644 drivers/mtd/nand/brcmnand/bcm63268_nand.c
>
> diff --git a/drivers/mtd/nand/brcmnand/Makefile b/drivers/mtd/nand/brcmnand/Makefile
> index 3b1fbfd..b83a9ae 100644
> --- a/drivers/mtd/nand/brcmnand/Makefile
> +++ b/drivers/mtd/nand/brcmnand/Makefile
> @@ -2,5 +2,6 @@
> # more specific iproc_nand.o, for instance
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += iproc_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63138_nand.o
> +obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63268_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmstb_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand.o
> diff --git a/drivers/mtd/nand/brcmnand/bcm63268_nand.c b/drivers/mtd/nand/brcmnand/bcm63268_nand.c
> new file mode 100644
> index 0000000..88b32fa
> --- /dev/null
> +++ b/drivers/mtd/nand/brcmnand/bcm63268_nand.c
> @@ -0,0 +1,174 @@
> +/*
> + * Copyright 2015 Simon Arlott
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Derived from bcm63138_nand.c:
> + * Copyright © 2015 Broadcom Corporation
> + *
> + * Derived from bcm963xx_4.12L.06B_consumer/shared/opensource/include/bcm963xx/63268_map_part.h:
> + * Copyright 2000-2010 Broadcom Corporation
> + *
> + * Derived from bcm963xx_4.12L.06B_consumer/shared/opensource/flash/nandflash.c:
> + * Copyright 2000-2010 Broadcom Corporation
> + */
> +
> +#include <linux/device.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "brcmnand.h"
> +
> +struct bcm63268_nand_soc {
> + struct brcmnand_soc soc;
> + void __iomem *base;
> + struct clk *clk;
> +};
> +
> +#define BCM63268_NAND_INT 0x00
> +#define BCM63268_NAND_STATUS_SHIFT 0
> +#define BCM63268_NAND_STATUS_MASK (0xfff << BCM63268_NAND_STATUS_SHIFT)
> +#define BCM63268_NAND_ENABLE_SHIFT 16
> +#define BCM63268_NAND_ENABLE_MASK (0xffff << BCM63268_NAND_ENABLE_SHIFT)
> +#define BCM63268_NAND_BASE_ADDR0 0x04
> +#define BCM63268_NAND_BASE_ADDR1 0x0c
> +
> +enum {
> + BCM63268_NP_READ = BIT(0),
> + BCM63268_BLOCK_ERASE = BIT(1),
> + BCM63268_COPY_BACK = BIT(2),
> + BCM63268_PAGE_PGM = BIT(3),
> + BCM63268_CTRL_READY = BIT(4),
> + BCM63268_DEV_RBPIN = BIT(5),
> + BCM63268_ECC_ERR_UNC = BIT(6),
> + BCM63268_ECC_ERR_CORR = BIT(7),
> +};
> +
> +static bool bcm63268_nand_intc_ack(struct brcmnand_soc *soc)
> +{
> + struct bcm63268_nand_soc *priv =
> + container_of(soc, struct bcm63268_nand_soc, soc);
> + void __iomem *mmio = priv->base + BCM63268_NAND_INT;
> + u32 val = brcmnand_readl(mmio);
> +
> + if (val & (BCM63268_CTRL_READY << BCM63268_NAND_STATUS_SHIFT)) {
> + /* Ack interrupt */
> + val &= ~BCM63268_NAND_STATUS_MASK;
> + val |= BCM63268_CTRL_READY << BCM63268_NAND_STATUS_SHIFT;
> + brcmnand_writel(val, mmio);
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void bcm63268_nand_intc_set(struct brcmnand_soc *soc, bool en)
> +{
> + struct bcm63268_nand_soc *priv =
> + container_of(soc, struct bcm63268_nand_soc, soc);
> + void __iomem *mmio = priv->base + BCM63268_NAND_INT;
> + u32 val = brcmnand_readl(mmio);
> +
> + /* Don't ack any interrupts */
> + val &= ~BCM63268_NAND_STATUS_MASK;
> +
> + if (en)
> + val |= BCM63268_CTRL_READY << BCM63268_NAND_ENABLE_SHIFT;
> + else
> + val &= ~(BCM63268_CTRL_READY << BCM63268_NAND_ENABLE_SHIFT);
> +
> + brcmnand_writel(val, mmio);
> +}
> +
> +static void bcm63268_nand_remove(struct brcmnand_soc *soc)
> +{
> + struct bcm63268_nand_soc *priv =
> + container_of(soc, struct bcm63268_nand_soc, soc);
> +
> + clk_disable_unprepare(priv->clk);
> + clk_put(priv->clk);
> +}
> +
> +static int bcm63268_nand_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct bcm63268_nand_soc *priv;
> + struct brcmnand_soc *soc;
> + struct resource *res;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> + soc = &priv->soc;
> +
> + res = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM, "nand-intr-base");
> + if (!res)
> + return -EINVAL;
> +
> + priv->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->clk = of_clk_get(dev->of_node, 0);
Why not use a named clock here? That way you can make use of
devm_clk_get and don't need to care about putting it.
> + if (IS_ERR(priv->clk))
> + return PTR_ERR(priv->clk);
> +
> + ret = clk_prepare_enable(priv->clk);
> + if (ret) {
> + clk_put(priv->clk);
> + return ret;
> + }
> +
> + soc->ctlrdy_ack = bcm63268_nand_intc_ack;
> + soc->ctlrdy_set_enabled = bcm63268_nand_intc_set;
> + soc->remove_device = bcm63268_nand_remove;
> +
> + /* Disable and ack all interrupts */
> + brcmnand_writel(0, priv->base + BCM63268_NAND_INT);
> + brcmnand_writel(BCM63268_NAND_STATUS_MASK,
> + priv->base + BCM63268_NAND_INT);
> +
> + ret = brcmnand_probe(pdev, soc);
> + if (ret) {
> + clk_disable_unprepare(priv->clk);
> + clk_put(priv->clk);
> + }
> +
> + return ret;
> +}
> +
> +static const struct of_device_id bcm63268_nand_of_match[] = {
> + { .compatible = "brcm,bcm63268-nand" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, bcm63268_nand_of_match);
> +
> +static struct platform_driver bcm63268_nand_driver = {
> + .probe = bcm63268_nand_probe,
> + .remove = brcmnand_remove,
> + .driver = {
> + .name = "bcm63268_nand",
> + .pm = &brcmnand_pm_ops,
> + .of_match_table = bcm63268_nand_of_match,
> + }
> +};
> +module_platform_driver(bcm63268_nand_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Simon Arlott");
> +MODULE_DESCRIPTION("NAND driver for BCM63268");
> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
> index 2c8f67f..7b4988f 100644
> --- a/drivers/mtd/nand/brcmnand/brcmnand.c
> +++ b/drivers/mtd/nand/brcmnand/brcmnand.c
> @@ -2270,6 +2270,9 @@ int brcmnand_remove(struct platform_device *pdev)
> list_for_each_entry(host, &ctrl->host_list, node)
> nand_release(&host->mtd);
>
> + if (ctrl->soc && ctrl->soc->remove_device)
> + ctrl->soc->remove_device(ctrl->soc);
> +
This is a bit weird, why don't you just use your own .remove callback
for the driver that like you did for .probe? then you won't need to
add a remove_device callback at all.
> dev_set_drvdata(&pdev->dev, NULL);
>
> return 0;
> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h b/drivers/mtd/nand/brcmnand/brcmnand.h
> index ef5eabb..5c5dc2d 100644
> --- a/drivers/mtd/nand/brcmnand/brcmnand.h
> +++ b/drivers/mtd/nand/brcmnand/brcmnand.h
> @@ -24,6 +24,7 @@ struct brcmnand_soc {
> bool (*ctlrdy_ack)(struct brcmnand_soc *soc);
> void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en);
> void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare);
> + void (*remove_device)(struct brcmnand_soc *soc);
> };
>
> static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc)
Jonas
More information about the linux-mtd
mailing list