[PATCH] mtd: cfi: Deiline large functions
Denys Vlasenko
dvlasenk at redhat.com
Mon May 18 03:58:40 PDT 2015
With this .config: http://busybox.net/~vda/kernel_config,
after uninlining these functions have sizes and callsite counts
as follows:
cfi_udelay(): 74 bytes, 26 callsites
cfi_send_gen_cmd(): 153 bytes, 95 callsites
cfi_build_cmd(): 274 bytes, 123 callsites
cfi_build_cmd_addr(): 49 bytes, 15 callsites
cfi_merge_status(): 230 bytes, 3 callsites
Reduction in code size is about 50,000:
text data bss dec hex filename
85842882 22294584 20627456 128764922 7accbfa vmlinux.before
85789648 22294616 20627456 128711720 7abfc28 vmlinux
Signed-off-by: Denys Vlasenko <dvlasenk at redhat.com>
CC: Dan Carpenter <dan.carpenter at oracle.com>
CC: Jingoo Han <jg1.han at samsung.com>
CC: Brian Norris <computersforpeace at gmail.com>
CC: Aaron Sierra <asierra at xes-inc.com>
CC: Artem Bityutskiy <Artem.Bityutskiy at linux.intel.com>
CC: David Woodhouse <David.Woodhouse at intel.com>
CC: linux-mtd at lists.infradead.org
CC: linux-kernel at vger.kernel.org
---
drivers/mtd/chips/cfi_util.c | 188 +++++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/cfi.h | 188 ++-----------------------------------------
2 files changed, 196 insertions(+), 180 deletions(-)
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 09c79bd..6f16552 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -23,6 +23,194 @@
#include <linux/mtd/map.h>
#include <linux/mtd/cfi.h>
+void cfi_udelay(int us)
+{
+ if (us >= 1000) {
+ msleep((us+999)/1000);
+ } else {
+ udelay(us);
+ cond_resched();
+ }
+}
+EXPORT_SYMBOL(cfi_udelay);
+
+/*
+ * Returns the command address according to the given geometry.
+ */
+uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
+ struct map_info *map, struct cfi_private *cfi)
+{
+ unsigned bankwidth = map_bankwidth(map);
+ unsigned interleave = cfi_interleave(cfi);
+ unsigned type = cfi->device_type;
+ uint32_t addr;
+
+ addr = (cmd_ofs * type) * interleave;
+
+ /* Modify the unlock address if we are in compatibility mode.
+ * For 16bit devices on 8 bit busses
+ * and 32bit devices on 16 bit busses
+ * set the low bit of the alternating bit sequence of the address.
+ */
+ if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
+ addr |= (type >> 1)*interleave;
+
+ return addr;
+}
+EXPORT_SYMBOL(cfi_build_cmd_addr);
+
+/*
+ * Transforms the CFI command for the given geometry (bus width & interleave).
+ * It looks too long to be inline, but in the common case it should almost all
+ * get optimised away.
+ */
+map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
+{
+ map_word val = { {0} };
+ int wordwidth, words_per_bus, chip_mode, chips_per_word;
+ unsigned long onecmd;
+ int i;
+
+ /* We do it this way to give the compiler a fighting chance
+ of optimising away all the crap for 'bankwidth' larger than
+ an unsigned long, in the common case where that support is
+ disabled */
+ if (map_bankwidth_is_large(map)) {
+ wordwidth = sizeof(unsigned long);
+ words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+ } else {
+ wordwidth = map_bankwidth(map);
+ words_per_bus = 1;
+ }
+
+ chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+ chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+ /* First, determine what the bit-pattern should be for a single
+ device, according to chip mode and endianness... */
+ switch (chip_mode) {
+ default: BUG();
+ case 1:
+ onecmd = cmd;
+ break;
+ case 2:
+ onecmd = cpu_to_cfi16(map, cmd);
+ break;
+ case 4:
+ onecmd = cpu_to_cfi32(map, cmd);
+ break;
+ }
+
+ /* Now replicate it across the size of an unsigned long, or
+ just to the bus width as appropriate */
+ switch (chips_per_word) {
+ default: BUG();
+#if BITS_PER_LONG >= 64
+ case 8:
+ onecmd |= (onecmd << (chip_mode * 32));
+#endif
+ case 4:
+ onecmd |= (onecmd << (chip_mode * 16));
+ case 2:
+ onecmd |= (onecmd << (chip_mode * 8));
+ case 1:
+ ;
+ }
+
+ /* And finally, for the multi-word case, replicate it
+ in all words in the structure */
+ for (i=0; i < words_per_bus; i++) {
+ val.x[i] = onecmd;
+ }
+
+ return val;
+}
+EXPORT_SYMBOL(cfi_build_cmd);
+
+unsigned long cfi_merge_status(map_word val, struct map_info *map,
+ struct cfi_private *cfi)
+{
+ int wordwidth, words_per_bus, chip_mode, chips_per_word;
+ unsigned long onestat, res = 0;
+ int i;
+
+ /* We do it this way to give the compiler a fighting chance
+ of optimising away all the crap for 'bankwidth' larger than
+ an unsigned long, in the common case where that support is
+ disabled */
+ if (map_bankwidth_is_large(map)) {
+ wordwidth = sizeof(unsigned long);
+ words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+ } else {
+ wordwidth = map_bankwidth(map);
+ words_per_bus = 1;
+ }
+
+ chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+ chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+ onestat = val.x[0];
+ /* Or all status words together */
+ for (i=1; i < words_per_bus; i++) {
+ onestat |= val.x[i];
+ }
+
+ res = onestat;
+ switch(chips_per_word) {
+ default: BUG();
+#if BITS_PER_LONG >= 64
+ case 8:
+ res |= (onestat >> (chip_mode * 32));
+#endif
+ case 4:
+ res |= (onestat >> (chip_mode * 16));
+ case 2:
+ res |= (onestat >> (chip_mode * 8));
+ case 1:
+ ;
+ }
+
+ /* Last, determine what the bit-pattern should be for a single
+ device, according to chip mode and endianness... */
+ switch (chip_mode) {
+ case 1:
+ break;
+ case 2:
+ res = cfi16_to_cpu(map, res);
+ break;
+ case 4:
+ res = cfi32_to_cpu(map, res);
+ break;
+ default: BUG();
+ }
+ return res;
+}
+EXPORT_SYMBOL(cfi_merge_status);
+
+/*
+ * Sends a CFI command to a bank of flash for the given geometry.
+ *
+ * Returns the offset in flash where the command was written.
+ * If prev_val is non-null, it will be set to the value at the command address,
+ * before the command was written.
+ */
+uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
+ struct map_info *map, struct cfi_private *cfi,
+ int type, map_word *prev_val)
+{
+ map_word val;
+ uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
+ val = cfi_build_cmd(cmd, map, cfi);
+
+ if (prev_val)
+ *prev_val = map_read(map, addr);
+
+ map_write(map, val, addr);
+
+ return addr - base;
+}
+EXPORT_SYMBOL(cfi_send_gen_cmd);
+
int __xipram cfi_qry_present(struct map_info *map, __u32 base,
struct cfi_private *cfi)
{
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 299d7d3..9b57a9b 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -296,183 +296,19 @@ struct cfi_private {
struct flchip chips[0]; /* per-chip data structure for each chip */
};
-/*
- * Returns the command address according to the given geometry.
- */
-static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
- struct map_info *map, struct cfi_private *cfi)
-{
- unsigned bankwidth = map_bankwidth(map);
- unsigned interleave = cfi_interleave(cfi);
- unsigned type = cfi->device_type;
- uint32_t addr;
-
- addr = (cmd_ofs * type) * interleave;
-
- /* Modify the unlock address if we are in compatibility mode.
- * For 16bit devices on 8 bit busses
- * and 32bit devices on 16 bit busses
- * set the low bit of the alternating bit sequence of the address.
- */
- if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
- addr |= (type >> 1)*interleave;
-
- return addr;
-}
-
-/*
- * Transforms the CFI command for the given geometry (bus width & interleave).
- * It looks too long to be inline, but in the common case it should almost all
- * get optimised away.
- */
-static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
-{
- map_word val = { {0} };
- int wordwidth, words_per_bus, chip_mode, chips_per_word;
- unsigned long onecmd;
- int i;
-
- /* We do it this way to give the compiler a fighting chance
- of optimising away all the crap for 'bankwidth' larger than
- an unsigned long, in the common case where that support is
- disabled */
- if (map_bankwidth_is_large(map)) {
- wordwidth = sizeof(unsigned long);
- words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
- } else {
- wordwidth = map_bankwidth(map);
- words_per_bus = 1;
- }
-
- chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
- chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
-
- /* First, determine what the bit-pattern should be for a single
- device, according to chip mode and endianness... */
- switch (chip_mode) {
- default: BUG();
- case 1:
- onecmd = cmd;
- break;
- case 2:
- onecmd = cpu_to_cfi16(map, cmd);
- break;
- case 4:
- onecmd = cpu_to_cfi32(map, cmd);
- break;
- }
-
- /* Now replicate it across the size of an unsigned long, or
- just to the bus width as appropriate */
- switch (chips_per_word) {
- default: BUG();
-#if BITS_PER_LONG >= 64
- case 8:
- onecmd |= (onecmd << (chip_mode * 32));
-#endif
- case 4:
- onecmd |= (onecmd << (chip_mode * 16));
- case 2:
- onecmd |= (onecmd << (chip_mode * 8));
- case 1:
- ;
- }
+uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
+ struct map_info *map, struct cfi_private *cfi);
- /* And finally, for the multi-word case, replicate it
- in all words in the structure */
- for (i=0; i < words_per_bus; i++) {
- val.x[i] = onecmd;
- }
-
- return val;
-}
+map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi);
#define CMD(x) cfi_build_cmd((x), map, cfi)
-
-static inline unsigned long cfi_merge_status(map_word val, struct map_info *map,
- struct cfi_private *cfi)
-{
- int wordwidth, words_per_bus, chip_mode, chips_per_word;
- unsigned long onestat, res = 0;
- int i;
-
- /* We do it this way to give the compiler a fighting chance
- of optimising away all the crap for 'bankwidth' larger than
- an unsigned long, in the common case where that support is
- disabled */
- if (map_bankwidth_is_large(map)) {
- wordwidth = sizeof(unsigned long);
- words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
- } else {
- wordwidth = map_bankwidth(map);
- words_per_bus = 1;
- }
-
- chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
- chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
-
- onestat = val.x[0];
- /* Or all status words together */
- for (i=1; i < words_per_bus; i++) {
- onestat |= val.x[i];
- }
-
- res = onestat;
- switch(chips_per_word) {
- default: BUG();
-#if BITS_PER_LONG >= 64
- case 8:
- res |= (onestat >> (chip_mode * 32));
-#endif
- case 4:
- res |= (onestat >> (chip_mode * 16));
- case 2:
- res |= (onestat >> (chip_mode * 8));
- case 1:
- ;
- }
-
- /* Last, determine what the bit-pattern should be for a single
- device, according to chip mode and endianness... */
- switch (chip_mode) {
- case 1:
- break;
- case 2:
- res = cfi16_to_cpu(map, res);
- break;
- case 4:
- res = cfi32_to_cpu(map, res);
- break;
- default: BUG();
- }
- return res;
-}
-
+unsigned long cfi_merge_status(map_word val, struct map_info *map,
+ struct cfi_private *cfi);
#define MERGESTATUS(x) cfi_merge_status((x), map, cfi)
-
-/*
- * Sends a CFI command to a bank of flash for the given geometry.
- *
- * Returns the offset in flash where the command was written.
- * If prev_val is non-null, it will be set to the value at the command address,
- * before the command was written.
- */
-static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
+uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
struct map_info *map, struct cfi_private *cfi,
- int type, map_word *prev_val)
-{
- map_word val;
- uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
- val = cfi_build_cmd(cmd, map, cfi);
-
- if (prev_val)
- *prev_val = map_read(map, addr);
-
- map_write(map, val, addr);
-
- return addr - base;
-}
+ int type, map_word *prev_val);
static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
{
@@ -506,15 +342,7 @@ static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
}
}
-static inline void cfi_udelay(int us)
-{
- if (us >= 1000) {
- msleep((us+999)/1000);
- } else {
- udelay(us);
- cond_resched();
- }
-}
+void cfi_udelay(int us);
int __xipram cfi_qry_present(struct map_info *map, __u32 base,
struct cfi_private *cfi);
--
1.8.1.4
More information about the linux-mtd
mailing list