[PATCH v5 00/12] ARM: berlin: add nand support
Ezequiel Garcia
ezequiel at vanguardiasur.com.ar
Sat May 16 14:37:51 PDT 2015
Hi Antoine,
This is a long patchset, which involves some very invasive changes
to the driver. So, I think it'll be better to split it in different
patchsets.
On 05/11/2015 11:58 AM, Antoine Tenart wrote:
[..]
>
> Antoine Tenart (12):
These two clock patches are related to Berlin support only.
> mtd: pxa3xx_nand: add a non mandatory ECC clock
> Documentation: bindings: document the clocks for pxa3xx-nand
The next four patches rework the timing setup and remove the legacy
device detection. I think we should try to get them merged in first place.
> mtd: pxa3xx_nand: add a default chunk size
> mtd: pxa3xx_nand: add helpers to setup the timings
> mtd: pxa3xx_nand: rework flash detection and timing setup
> mtd: pxa3xx_nand: clean up the pxa3xx timings
Next one just adds support for a new device. It has little to do with
the series. I already replied about using JEDEC ID; once we solve that,
I suggest that you submit this patch alone.
> mtd: nand: add Samsung K9GBG08U0A-M to nand_ids table
And finally, once we solve the timing rework, we can go through Berlin
support.
> mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller
> Documentation: bindings: add the Berlin nand controller compatible
> mtd: nand: let Marvell Berlin SoCs select the pxa3xx driver
> ARM: berlin: add BG2Q node for the nand
> ARM: berlin: enable flash on the BG2Q DMP
>
What do you think?
> .../devicetree/bindings/mtd/pxa3xx-nand.txt | 5 +
> arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 25 ++
> arch/arm/boot/dts/berlin2q.dtsi | 13 +
> drivers/mtd/nand/Kconfig | 4 +-
> drivers/mtd/nand/nand_ids.c | 4 +
> drivers/mtd/nand/pxa3xx_nand.c | 440 +++++++++++++++------
> include/linux/platform_data/mtd-nand-pxa3xx.h | 11 +-
> 7 files changed, 374 insertions(+), 128 deletions(-)
>
--
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar
More information about the linux-mtd
mailing list