[PATCH_V2 2/2] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
Brian Norris
computersforpeace at gmail.com
Mon Mar 30 19:42:05 PDT 2015
I can't compile test most of this, since I don't have the dependencies.
But the code looks mostly OK.
On Mon, Mar 09, 2015 at 11:58:19AM +0000, Zubair Lutfullah Kakakhel wrote:
> From: Alex Smith <alex.smith at imgtec.com>
>
> Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
> well as the hardware BCH controller. DMA is not currently implemented.
>
> While older 47xx SoCs also have a BCH controller, they are incompatible
> with the one in the 4780 due to differing register/bit positions, which
> would make implementing a common driver for them quite messy.
>
> Signed-off-by: Alex Smith <alex at alex-smith.me.uk>
> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel at imgtec.com>
>
> ---
> V1 - > V2
> Fixed module license macro
> Rebase to 4.0-rc3
> ---
> drivers/mtd/nand/Kconfig | 7 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/jz4780_bch.c | 358 +++++++++++++++++++++++++++++++++++++++
> drivers/mtd/nand/jz4780_bch.h | 42 +++++
> drivers/mtd/nand/jz4780_nand.c | 372 +++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 780 insertions(+)
> create mode 100644 drivers/mtd/nand/jz4780_bch.c
> create mode 100644 drivers/mtd/nand/jz4780_bch.h
> create mode 100644 drivers/mtd/nand/jz4780_nand.c
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 5b76a17..7627002 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -503,6 +503,13 @@ config MTD_NAND_JZ4740
> help
> Enables support for NAND Flash on JZ4740 SoC based boards.
>
> +config MTD_NAND_JZ4780
> + tristate "Support for NAND on JZ4780 SoC"
> + depends on MACH_JZ4780 && JZ4780_NEMC
> + help
> + Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
> + based boards, using the BCH controller for hardware error correction.
> +
> config MTD_NAND_FSMC
> tristate "Support for NAND on ST Micros FSMC"
> depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 582bbd05..7c1ebca 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
> obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
> obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
> obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
> +obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
> obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
> obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
> obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
> diff --git a/drivers/mtd/nand/jz4780_bch.c b/drivers/mtd/nand/jz4780_bch.c
> new file mode 100644
> index 0000000..eb264be
> --- /dev/null
> +++ b/drivers/mtd/nand/jz4780_bch.c
> @@ -0,0 +1,358 @@
...
> +/**
> + * jz4780_bch_get() - get the BCH controller device
> + * @np: BCH device tree node.
> + * @dev: where to store pointer to BCH controller device.
> + *
> + * Gets the BCH controller device from the specified device tree node. The
> + * device must be released with jz4780_bch_release() when it is no longer being
> + * used.
> + *
> + * Return: 0 on success, -EPROBE_DEFER if the controller has not yet been
> + * initialised.
> + */
> +int jz4780_bch_get(struct device_node *np, struct device **dev)
> +{
> + struct platform_device *pdev;
> + struct jz4780_bch *bch;
> +
> + pdev = of_find_device_by_node(np);
> + if (!pdev || !platform_get_drvdata(pdev))
> + return -EPROBE_DEFER;
> +
> + bch = platform_get_drvdata(pdev);
> + clk_prepare_enable(bch->clk);
> +
> + *dev = &pdev->dev;
Might want a get_device() / put_device() pair in this driver, so you
can't unbind the BCH controller device while the NAND driver is using
it?
> + return 0;
> +}
> +EXPORT_SYMBOL(jz4780_bch_get);
> +
> +/**
> + * jz4780_bch_release() - release the BCH controller device
> + * @dev: BCH device.
> + */
> +void jz4780_bch_release(struct device *dev)
> +{
> + struct jz4780_bch *bch = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(bch->clk);
> +}
> +EXPORT_SYMBOL(jz4780_bch_release);
> +
> +static int jz4780_bch_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct jz4780_bch *bch;
> + struct resource *res;
> +
> + bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
> + if (!bch)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + bch->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(bch->base)) {
> + dev_err(dev, "failed to get I/O memory\n");
> + return PTR_ERR(bch->base);
> + }
> +
> + jz4780_bch_disable(bch);
> +
> + bch->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(bch->clk)) {
> + dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
> + return PTR_ERR(bch->clk);
> + }
> +
> + clk_set_rate(bch->clk, BCH_CLK_RATE);
> +
> + platform_set_drvdata(pdev, bch);
> + dev_info(dev, "JZ4780 BCH initialised\n");
> + return 0;
> +}
> +
> +static int jz4780_bch_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
An empty .remove() callback can just be removed.
> +
> +static const struct of_device_id jz4780_bch_dt_match[] = {
> + { .compatible = "ingenic,jz4780-bch" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
> +
> +static struct platform_driver jz4780_bch_driver = {
> + .probe = jz4780_bch_probe,
> + .remove = jz4780_bch_remove,
> + .driver = {
> + .name = "jz4780-bch",
> + .owner = THIS_MODULE,
You don't need the .owner assignment. module_platform_driver() handles
this for you.
> + .of_match_table = of_match_ptr(jz4780_bch_dt_match),
> + },
> +};
> +module_platform_driver(jz4780_bch_driver);
> +
> +MODULE_AUTHOR("Alex Smith <alex at alex-smith.me.uk>");
> +MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mtd/nand/jz4780_bch.h b/drivers/mtd/nand/jz4780_bch.h
> new file mode 100644
> index 0000000..cf315f3
> --- /dev/null
> +++ b/drivers/mtd/nand/jz4780_bch.h
> @@ -0,0 +1,42 @@
> +/*
> + * JZ4780 BCH controller
> + *
> + * Copyright (c) 2015 Imagination Technologies
> + * Author: Alex Smith <alex at alex-smith.me.uk>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
> +#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
> +
> +#include <linux/types.h>
> +
> +struct device;
> +struct device_node;
> +
> +/**
> + * struct jz4780_bch_params - BCH parameters
> + * @size: data bytes per ECC step.
> + * @bytes: ECC bytes per step.
> + * @strength: number of correctable bits per ECC step.
> + */
> +struct jz4780_bch_params {
> + int size;
> + int bytes;
> + int strength;
> +};
> +
> +extern int jz4780_bch_calculate(struct device *dev,
> + struct jz4780_bch_params *params,
> + const uint8_t *buf, uint8_t *ecc_code);
> +extern int jz4780_bch_correct(struct device *dev,
> + struct jz4780_bch_params *params, uint8_t *buf,
> + uint8_t *ecc_code);
> +
> +extern int jz4780_bch_get(struct device_node *np, struct device **dev);
> +extern void jz4780_bch_release(struct device *dev);
> +
> +#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
> diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c
> new file mode 100644
> index 0000000..542a6fc
> --- /dev/null
> +++ b/drivers/mtd/nand/jz4780_nand.c
> @@ -0,0 +1,372 @@
...
> +static int jz4780_nand_init_chips(struct jz4780_nand *nand, struct device *dev)
> +{
> + struct jz4780_nand_chip *chip;
> + const __be32 *prop;
> + u64 addr, size;
> + int i = 0;
> +
> + /*
> + * Iterate over each bank assigned to this device and request resources.
> + * The bank numbers may not be consecutive, but nand_scan_ident()
> + * expects chip numbers to be, so fill out a consecutive array of chips
> + * which map chip number to actual bank number.
> + */
> + while ((prop = of_get_address(dev->of_node, i, &size, NULL))) {
> + chip = &nand->chips[i];
> + chip->bank = of_read_number(prop, 1);
> +
> + jz47xx_nemc_set_type(nand->dev, chip->bank,
> + JZ47XX_NEMC_BANK_NAND);
> +
> + addr = of_translate_address(dev->of_node, prop);
> + if (addr == OF_BAD_ADDR)
> + return -EINVAL;
Is it not possible to use platform_get_resource() here? I'm not real
sure about the platform and resource APIs vs. of_* APIs here, so I'm not
sure.
> +
> + chip->base = devm_ioremap(dev, addr, size);
> + if (IS_ERR(chip->base)) {
> + dev_err(dev, "failed to map bank %u: %ld\n", chip->bank,
> + PTR_ERR(chip->base));
> + return PTR_ERR(chip->base);
> + }
> +
> + i++;
> + }
> +
> + return 0;
> +}
> +
> +static int jz4780_nand_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + unsigned int num_banks;
> + struct jz4780_nand *nand;
> + struct device_node *bch_np;
> + struct mtd_info *mtd;
> + struct nand_chip *chip;
> + enum of_gpio_flags flags;
> + struct mtd_part_parser_data ppdata;
> + int ret;
> +
> + num_banks = jz47xx_nemc_num_banks(dev);
> +
> + nand = devm_kzalloc(dev,
> + sizeof(*nand) + (sizeof(nand->chips[0]) * num_banks),
> + GFP_KERNEL);
> + if (!nand)
> + return -ENOMEM;
> +
> + nand->dev = dev;
> + nand->num_banks = num_banks;
> + nand->selected = -1;
> +
> + /* Look for the BCH controller. */
> + bch_np = of_parse_phandle(dev->of_node, "ingenic,bch-device", 0);
> + if (bch_np) {
> + ret = jz4780_bch_get(bch_np, &nand->bch);
> + of_node_put(bch_np);
> + if (ret)
> + return ret;
> + }
> +
> + mtd = &nand->mtd;
> + chip = &nand->chip;
> + mtd->priv = chip;
> + mtd->owner = THIS_MODULE;
Please also set mtd->dev.parent.
> + mtd->name = "jz4780-nand";
> +
> + chip->chip_delay = RB_DELAY;
> + chip->options = NAND_NO_SUBPAGE_WRITE;
> + chip->bbt_options = NAND_BBT_USE_FLASH;
> + chip->select_chip = jz4780_nand_select_chip;
> + chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
> +
> + nand->busy_gpio = of_get_named_gpio_flags(dev->of_node,
> + "ingenic,busy-gpio",
> + 0, &flags);
> + if (gpio_is_valid(nand->busy_gpio)) {
> + ret = devm_gpio_request(dev, nand->busy_gpio, "NAND busy");
> + if (ret) {
> + dev_err(dev, "failed to request busy GPIO %d: %d\n",
> + nand->busy_gpio, ret);
> + goto err_release_bch;
> + }
> +
> + nand->busy_gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
> + gpio_direction_input(nand->busy_gpio);
> +
> + chip->dev_ready = jz4780_nand_dev_ready;
> + }
> +
> + nand->wp_gpio = of_get_named_gpio_flags(dev->of_node, "ingenic,wp-gpio",
> + 0, &flags);
> + if (gpio_is_valid(nand->wp_gpio)) {
> + ret = devm_gpio_request(dev, nand->wp_gpio, "NAND WP");
> + if (ret) {
> + dev_err(dev, "failed to request WP GPIO %d: %d\n",
> + nand->wp_gpio, ret);
> + goto err_release_bch;
> + }
> +
> + nand->wp_gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
> + gpio_direction_output(nand->wp_gpio, nand->wp_gpio_active_low);
> + }
> +
> + ret = jz4780_nand_init_chips(nand, dev);
> + if (ret)
> + goto err_release_bch;
> +
> + ret = nand_scan_ident(mtd, num_banks, NULL);
> + if (ret)
> + goto err_release_bch;
> +
> + jz4780_nand_init_ecc(nand, dev);
> +
> + ret = nand_scan_tail(mtd);
> + if (ret)
> + goto err_release_bch;
> +
> + ppdata.of_node = dev->of_node;
> + ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
> + if (ret)
> + goto err_release_nand;
> +
> + platform_set_drvdata(pdev, nand);
> + dev_info(dev, "JZ4780 NAND initialised\n");
> + return 0;
> +
> +err_release_nand:
> + nand_release(mtd);
> +
> +err_release_bch:
> + if (nand->bch)
> + jz4780_bch_release(nand->bch);
> +
> + return ret;
> +}
> +
> +static int jz4780_nand_remove(struct platform_device *pdev)
> +{
> + struct jz4780_nand *nand = platform_get_drvdata(pdev);
> +
> + if (nand->bch)
> + jz4780_bch_release(nand->bch);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id jz4780_nand_dt_match[] = {
> + { .compatible = "ingenic,jz4780-nand" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
> +
> +static struct platform_driver jz4780_nand_driver = {
> + .probe = jz4780_nand_probe,
> + .remove = jz4780_nand_remove,
> + .driver = {
> + .name = "jz4780-nand",
> + .owner = THIS_MODULE,
You don't need the .owner assignment here. module_platform_driver()
handles this for you.
> + .of_match_table = of_match_ptr(jz4780_nand_dt_match),
> + },
> +};
> +module_platform_driver(jz4780_nand_driver);
> +
> +MODULE_AUTHOR("Alex Smith <alex.smith at imgtec.com>");
> +MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
> +MODULE_LICENSE("GPL v2");
Brian
More information about the linux-mtd
mailing list