FW: [PATCH v2] mtd:spi-nor: Add Altera EPCQ Driver

[Viet Nga Dao]

Hi Rafal,

On Tue, Mar 10, 2015 at 4:09 PM, Viet Nga Dao <vndao at altera.com> wrote:
>>>>> +
>>>>> +    /* Altera EPCQ/EPCS Flashes */
>>>>> +    { "epcq16"  , EPCQ_INFO(2, 0x15, 0x10000, 32,   0x100) },
>>>>> +    { "epcq32"  , EPCQ_INFO(2, 0x16, 0x10000, 64,   0x100) },
>>>>> +    { "epcq64"  , EPCQ_INFO(2, 0x17, 0x10000, 128,  0x100) },
>>>>> +    { "epcq128" , EPCQ_INFO(2, 0x18, 0x10000, 256,  0x100) },
>>>>> +    { "epcq256" , EPCQ_INFO(2, 0x19, 0x10000, 512,  0x100) },
>>>>> +    { "epcq512" , EPCQ_INFO(2, 0x20, 0x10000, 1024, 0x100) },
>>>>> +    { "epcs16"  , EPCQ_INFO(1, 0x14, 0x10000, 32,   0x100) },
>>>>> +    { "epcs64"  , EPCQ_INFO(1, 0x16, 0x10000, 128,  0x100) },
>>>>> +    { "epcs128" , EPCQ_INFO(1, 0x18, 0x40000, 256,  0x100) },
>>>>>      { },
>>>>>  };
>>>>>
>>>>> @@ -666,6 +731,14 @@ static const struct spi_device_id
>>>>> *spi_nor_read_id(struct spi_nor *nor)
>>>>>          if (info->jedec_id == jedec) {
>>>>>              if (info->ext_id == 0 || info->ext_id == ext_jedec)
>>>>>                  return &spi_nor_ids[tmp];
>>>>> +
>>>>> +        /* altera epcq which is non jedec device
>>>>> +         * use id[4] as opcode id to differentiate
>>>>> +         * epcs and epcq devices
>>>>> +         */
>>>>> +        } else if (info->altera_flash_opcode_id == id[4] &&
>>>>> +              info->ext_id == id[3]) {
>>>>> +                return &spi_nor_ids[tmp];
>>>>
>>>> This is the part I don't like. I think it's fishy, and that this
>>>> check may result in false positives. Looks too generic.
>>>>
>>>> Also the logic of your behavior there seems unclear to me. On the one
>>>> hand you don't have JEDEC, so you provide chip name using DT. But in
>>>> place above you stop trusting DT info and you try to (kind of)
>>>> auto-detect used chip anyway.
>>>>
>>>> I guess we should finally think about some more generic way of
>>>> passing flash info.
>>>
>>> Actually, i just want fo follow the way current spi-nor doing as much
>>> as possible. Like to read the device id and compare with info table.
>>> Like double checking from both dtb and the device id. Since the
>>> flashes i support do not have JEDEC id but only extended id. But the
>>> problem is that some of them have the same extended id, for example
>>> epcs64 and epcq32). That is why in my driver, i have to decode 1st
>>> byte of ext id to differentiate epcs and ecpq.
>>
>> I see your point and it makes sense, I just think it shouldn't be part of spi-nor. By adding chip specific code to spi-nor we'll end with hacky code and possible false chips identifications. I can really easily imagine some random chip having the same id[3] and id[4] as one of Altera flashes.
>>
>> Moreover your patch has not working support for epcs16 and epcs64.
>> They don't support 0x9f opcode (SPINOR_OP_RDID), so you would need to add support for 0xab ("Read silicon ID") to the spi-nor.
>>
>> It's the same problem I have with Broadcom's "w25q128" that doesn't support 0x9f opcode but a 0x90 with 16b reply. You may see my tiny bcm53xxspiflash.c driver:
>> http://git.openwrt.org/?p=openwrt.git;a=blob;f=target/linux/bcm53xx/files/drivers/mtd/spi-nor/bcm53xxspiflash.c;h=f192f4e59b71a2444833b5c62dd2239d28f9435d;hb=d105c51a428a72a9af42759c472df9960c496d67
>>
>> So I'm afraid that if spi-nor gets support for:
>> 1) 0xab opcode
>> 2) 0x90 opcode
>> 3) Some uncommon replies for 0x9f opcode (like Altera ones) it will quickly get hacky & buggy.
>>
>> So what about:
>> 1) Using 0x9f and 0xab in altera_epcq.c
>> 2) Finding chip name in altera_epcq.c
>> 3) Adding Altera chip names & all sizes to spi-nor.c
>> 4) Just passing a chip name to spi-nor.c
>>
>> It's something I do in bcm53xxspiflash.c. I detect w25q128 using some specific 0x90 opcode and just pass a chip name to the spi-nor.
>>
>> --
>> Rafał
>>
> Ok. I will modify the code the way you suggest.

I just realize that the opcode for RDID is handled by hardware in my
case, therefore i dont really need to worry about 0xab opcode.
Is there any other comments about the modified part i did the lock and
unlock in spi-nor.c?