[PATCH v2] mtd:spi-nor: Add Altera EPCQ Driver

[Viet Nga Dao]

Hi Rafal,
Thanks for your review.

On Mon, Mar 9, 2015 at 2:31 PM, Rafał Miłecki <zajec5 at gmail.com> wrote:
> Hi Viet,
>
> I'm not too active in mtd subsystem, so I didn't notice your patch
> earlier. However I would like to share few comments.
>
> On 11 February 2015 at 05:53, Viet Nga Dao <vndao at altera.com> wrote:
>> From: Viet Nga Dao <vndao at altera.com>
>>
>> Altera EPCQ Controller is a soft IP which enables access to Altera EPCQ and
>> EPCS flash chips. This patch adds driver for these devices.
>
> First of all, your whole patch is white-space damaged. It can't be
> applied, seems all tabs were replaced with spaces. It's what I got in
> my GMail and what was also received by patchwork, see
> https://patchwork.ozlabs.org/patch/438684/
>
> You'll need to resend using some smarter e-mail client, you may e.g.
> try git send-email.
>
>
>> +#define EPCQ_INFO(_opcode_id, _ext_id, _sector_size, _n_sectors, _page_size) \
>> +    ((kernel_ulong_t)&(struct flash_info) {                \
>> +        .altera_flash_opcode_id = (_opcode_id),            \
>> +        .ext_id = (_ext_id),                    \
>> +        .sector_size = (_sector_size),                \
>> +        .n_sectors = (_n_sectors),                \
>> +        .page_size = (_page_size),                \
>> +    })
>
> Starting with kernel 3.19 we don't have ext_id in struct anymore, see:
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d928a259385dc6fca3956b7775c588f21c0b50fc
>
>

Noted. I will make the modification accordingly.

>>  /* NOTE: double check command sets and memory organization when you add
>>   * more nor chips.  This current list focusses on newer chips, which
>>   * have been converging on command sets which including JEDEC ID.
>> @@ -637,6 +691,17 @@ static const struct spi_device_id spi_nor_ids[] = {
>>      { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE |
>> SPI_NOR_NO_FR) },
>>      { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE |
>> SPI_NOR_NO_FR) },
>>      { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE |
>> SPI_NOR_NO_FR) },
>> +
>> +    /* Altera EPCQ/EPCS Flashes */
>> +    { "epcq16"  , EPCQ_INFO(2, 0x15, 0x10000, 32,   0x100) },
>> +    { "epcq32"  , EPCQ_INFO(2, 0x16, 0x10000, 64,   0x100) },
>> +    { "epcq64"  , EPCQ_INFO(2, 0x17, 0x10000, 128,  0x100) },
>> +    { "epcq128" , EPCQ_INFO(2, 0x18, 0x10000, 256,  0x100) },
>> +    { "epcq256" , EPCQ_INFO(2, 0x19, 0x10000, 512,  0x100) },
>> +    { "epcq512" , EPCQ_INFO(2, 0x20, 0x10000, 1024, 0x100) },
>> +    { "epcs16"  , EPCQ_INFO(1, 0x14, 0x10000, 32,   0x100) },
>> +    { "epcs64"  , EPCQ_INFO(1, 0x16, 0x10000, 128,  0x100) },
>> +    { "epcs128" , EPCQ_INFO(1, 0x18, 0x40000, 256,  0x100) },
>>      { },
>>  };
>>
>> @@ -666,6 +731,14 @@ static const struct spi_device_id
>> *spi_nor_read_id(struct spi_nor *nor)
>>          if (info->jedec_id == jedec) {
>>              if (info->ext_id == 0 || info->ext_id == ext_jedec)
>>                  return &spi_nor_ids[tmp];
>> +
>> +        /* altera epcq which is non jedec device
>> +         * use id[4] as opcode id to differentiate
>> +         * epcs and epcq devices
>> +         */
>> +        } else if (info->altera_flash_opcode_id == id[4] &&
>> +              info->ext_id == id[3]) {
>> +                return &spi_nor_ids[tmp];
>
> This is the part I don't like. I think it's fishy, and that this check
> may result in false positives. Looks too generic.
>
> Also the logic of your behavior there seems unclear to me. On the one
> hand you don't have JEDEC, so you provide chip name using DT. But in
> place above you stop trusting DT info and you try to (kind of)
> auto-detect used chip anyway.
>
> I guess we should finally think about some more generic way of passing
> flash info.

Actually, i just want fo follow the way current spi-nor doing as much
as possible. Like to read the device id and compare with info table.
Like double checking from both dtb and the device id. Since the
flashes i support do not have JEDEC id but only extended id. But the
problem is that some of them have the same extended id, for example
epcs64 and epcq32). That is why in my driver, i have to decode 1st
byte of ext id to differentiate epcs and ecpq.