[PATCH v3 4/9] mtd: pxa3xx_nand: rework timings setup
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Mon Mar 9 06:37:09 PDT 2015
On 03/05/2015 08:31 AM, Antoine Tenart wrote:
> Use the nand framework helpers: onfi_get_async_timing_mode() and
> onfi_async_timing_mode_to_sdr_timings() to retrieve the timing
> configuration. Then update the pxa3xx timing setup function to use the
> timing configuration retrieved.
>
> Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
> ---
> drivers/mtd/nand/pxa3xx_nand.c | 101 ++++++++++++++++++--------
> include/linux/platform_data/mtd-nand-pxa3xx.h | 2 -
> 2 files changed, 69 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index dc0edbc406bb..4bcfb4cf6fee 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -243,23 +243,16 @@ static bool use_dma = 1;
> module_param(use_dma, bool, 0444);
> MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
>
> -static struct pxa3xx_nand_timing timing[] = {
> - { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
> - { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
> - { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
> - { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
> -};
> -
> static struct pxa3xx_nand_flash builtin_flash_types[] = {
> -{ "DEFAULT FLASH", 0, 0, 2048, 8, 8, 0, &timing[0] },
> -{ "64MiB 16-bit", 0x46ec, 32, 512, 16, 16, 4096, &timing[1] },
> -{ "256MiB 8-bit", 0xdaec, 64, 2048, 8, 8, 2048, &timing[1] },
> -{ "4GiB 8-bit", 0xd7ec, 128, 4096, 8, 8, 8192, &timing[1] },
> -{ "128MiB 8-bit", 0xa12c, 64, 2048, 8, 8, 1024, &timing[2] },
> -{ "128MiB 16-bit", 0xb12c, 64, 2048, 16, 16, 1024, &timing[2] },
> -{ "512MiB 8-bit", 0xdc2c, 64, 2048, 8, 8, 4096, &timing[2] },
> -{ "512MiB 16-bit", 0xcc2c, 64, 2048, 16, 16, 4096, &timing[2] },
> -{ "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] },
> +{ "DEFAULT FLASH", 0, 0, 2048, 8, 8, 0 },
> +{ "64MiB 16-bit", 0x46ec, 32, 512, 16, 16, 4096 },
> +{ "256MiB 8-bit", 0xdaec, 64, 2048, 8, 8, 2048 },
> +{ "4GiB 8-bit", 0xd7ec, 128, 4096, 8, 8, 8192 },
> +{ "128MiB 8-bit", 0xa12c, 64, 2048, 8, 8, 1024 },
> +{ "128MiB 16-bit", 0xb12c, 64, 2048, 16, 16, 1024 },
> +{ "512MiB 8-bit", 0xdc2c, 64, 2048, 8, 8, 4096 },
> +{ "512MiB 16-bit", 0xcc2c, 64, 2048, 16, 16, 4096 },
> +{ "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048 },
> };
>
> static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
> @@ -361,22 +354,31 @@ pxa3xx_nand_get_variant(struct platform_device *pdev)
> }
>
> static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
> - const struct pxa3xx_nand_timing *t)
> + const struct nand_sdr_timings *t)
> {
> struct pxa3xx_nand_info *info = host->info_data;
> unsigned long nand_clk = clk_get_rate(info->clk);
> uint32_t ndtr0, ndtr1;
> -
> - ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
> - NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
> - NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
> - NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
> - NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
> - NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
> -
> - ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
> - NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
> - NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
> + u32 tCH_min = DIV_ROUND_UP(t->tCH_min, 1000);
> + u32 tCS_min = DIV_ROUND_UP(t->tCS_min, 1000);
> + u32 tWH_min = DIV_ROUND_UP(t->tWH_min, 1000);
> + u32 tWP_min = DIV_ROUND_UP(t->tWP_min, 1000);
> + u32 tREH_min = DIV_ROUND_UP(t->tREH_min, 1000);
> + u32 tRP_min = DIV_ROUND_UP(t->tRP_min, 1000);
> + u32 tRST_max = DIV_ROUND_UP_ULL(t->tRST_max, 1000);
> + u32 tWHR_min = DIV_ROUND_UP(t->tWHR_min, 1000);
> + u32 tAR_min = DIV_ROUND_UP(t->tAR_min, 1000);
> +
> + ndtr0 = NDTR0_tCH(ns2cycle(tCH_min, nand_clk)) |
> + NDTR0_tCS(ns2cycle(tCS_min, nand_clk)) |
> + NDTR0_tWH(ns2cycle(tWH_min, nand_clk)) |
> + NDTR0_tWP(ns2cycle(tWP_min, nand_clk)) |
> + NDTR0_tRH(ns2cycle(tREH_min, nand_clk)) |
> + NDTR0_tRP(ns2cycle(tRP_min, nand_clk));
> +
> + ndtr1 = NDTR1_tR(ns2cycle(tRST_max, nand_clk)) |
> + NDTR1_tWHR(ns2cycle(tWHR_min, nand_clk)) |
> + NDTR1_tAR(ns2cycle(tAR_min, nand_clk));
>
> info->ndtr0cs0 = ndtr0;
> info->ndtr1cs0 = ndtr1;
> @@ -384,6 +386,29 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
> nand_writel(info, NDTR1CS0, ndtr1);
> }
>
> +static int pxa3xx_nand_init_timings(struct pxa3xx_nand_host *host)
> +{
> + const struct nand_sdr_timings *timings;
> + int mode;
> +
> + mode = onfi_get_async_timing_mode(&host->chip);
> + if (mode == ONFI_TIMING_MODE_UNKNOWN) {
> + mode = host->chip.onfi_timing_mode_default;
> + } else {
> + mode = fls(mode) - 1;
> + if (mode < 0)
> + mode = 0;
> + }
> +
> + timings = onfi_async_timing_mode_to_sdr_timings(mode);
> + if (IS_ERR(timings))
> + return PTR_ERR(timings);
> +
> + pxa3xx_nand_set_timing(host, timings);
> +
> + return 0;
> +}
> +
> /*
> * Set the data and OOB size, depending on the selected
> * spare and ECC configuration.
> @@ -1226,7 +1251,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
>
> info->reg_ndcr = ndcr;
>
> - pxa3xx_nand_set_timing(host, f->timing);
> return 0;
> }
>
> @@ -1321,20 +1345,28 @@ static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
> }
> #endif
>
> -static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
> +static int pxa3xx_nand_sensing(struct pxa3xx_nand_host *host)
> {
> + struct pxa3xx_nand_info *info = host->info_data;
> struct mtd_info *mtd;
> struct nand_chip *chip;
> + const struct nand_sdr_timings *timings;
> int ret;
>
> mtd = info->host[info->cs]->mtd;
> chip = mtd->priv;
>
> - /* use the common timing to make a try */
> ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
> if (ret)
> return ret;
>
> + /* use the common timing to make a try */
> + timings = onfi_async_timing_mode_to_sdr_timings(0);
> + if (IS_ERR(timings))
> + return PTR_ERR(timings);
> +
> + pxa3xx_nand_set_timing(host, timings);
> +
> chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
> ret = chip->waitfunc(mtd, chip);
> if (ret & NAND_STATUS_FAIL)
> @@ -1420,6 +1452,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
> struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
> struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
> const struct pxa3xx_nand_flash *f = NULL;
> + const struct nand_sdr_timings *timings;
> struct nand_chip *chip = mtd->priv;
> uint32_t id = -1;
> uint64_t chipsize;
> @@ -1432,7 +1465,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
> /* Set a default chunk size */
> info->chunk_size = 512;
>
> - ret = pxa3xx_nand_sensing(info);
> + ret = pxa3xx_nand_sensing(host);
> if (ret) {
> dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
> info->cs);
> @@ -1498,6 +1531,10 @@ KEEP_CONFIG:
> if (nand_scan_ident(mtd, 1, def))
> return -ENODEV;
>
> + ret = pxa3xx_nand_init_timings(host);
> + if (ret)
> + dev_err(&info->pdev->dev, "Failed to set timings: %d\n", ret);
> +
> if (pdata->flash_bbt) {
> /*
> * We'll use a bad block table stored in-flash and don't
> diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h
> index ac4ea2e641c7..27d8f6354c2a 100644
> --- a/include/linux/platform_data/mtd-nand-pxa3xx.h
> +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h
> @@ -24,8 +24,6 @@ struct pxa3xx_nand_flash {
> unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
> unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
> unsigned int num_blocks; /* Number of physical blocks in Flash */
> -
> - struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
> };
>
> /*
>
This removes support for setting timing on non-ONFI devices. So, you
either need to keep the code around, or introduce some mechanism to
specify timings on these devices.
--
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
More information about the linux-mtd
mailing list