[PATCH 0/3] mtd: nand: add Broadcom NAND controller support

[Rafał Miłecki]

On 8 March 2015 at 01:57, Brian Norris <computersforpeace at gmail.com> wrote:
> 3. I was told that there were only 2 or 3 chips that were released with
> a v6.1 NAND controller, and BCM4708 wasn't one of them. Apparently I was
> told wrong... I'll have to see if there are any other quirks we should
> be accounting for.

Please note I'm speaking about 6.01, not 6.10. Maybe it make a difference?

Buffalo WZR-600DHP2 (BCM47081)
[    0.325732] [brcmnand_revision_init:371] ctrl->nand_version:0x0601
[    4.838105] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02

Buffalo WZR-1750DHP (BCM4708)
[    0.326823] [brcmnand_revision_init:371] ctrl->nand_version:0x0601
[    6.674288] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02

Netgear R6250 V1 (BCM4708)
[    0.326248] [brcmnand_revision_init:371] ctrl->nand_version:0x0601
[    8.721335] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x02

Netgear R8000 (BCM4709)
[    0.241961] bcma: bus0: Found chip with id 53010, rev 0x00 and package 0x00
[    1.990330] bcm_nand bcma0:18: NAND Controller rev 6.01

-- 
Rafał