[PATCH v2] mtd: atmel_nand: check NFC busy flag by HSMC_SR instead of NFC cmd regs
Josh Wu
josh.wu at atmel.com
Tue Mar 3 23:22:54 PST 2015
Hi, Brain
Would you have any chance to take this patch as it's been a long time?
Best Regards,
Josh Wu
On 1/22/2015 6:21 PM, Josh Wu wrote:
> From: Boris Brezillon <boris.brezillon at free-electrons.com>
>
> Currently the driver read NFC command registers to get NFC busy flag.
> Actually this flag also can be get by reading HSMC_SR register.
>
> Use the read NFC command registers need mapping a huge memory region.
> To save the mapped memory region, we change to check NFC busy flag by
> reading HSMC_SR register.
>
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> Signed-off-by: Josh Wu <josh.wu at atmel.com>
> ---
>
> Changes in v2:
> - Change me to signed-off-by.
> - modify the error log.
>
> drivers/mtd/nand/atmel_nand.c | 5 ++---
> drivers/mtd/nand/atmel_nand_nfc.h | 1 +
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index d93c849..336cc2d 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -1752,11 +1752,10 @@ static int nfc_send_command(struct atmel_nand_host *host,
> cmd, addr, cycle0);
>
> timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS);
> - while (nfc_cmd_readl(NFCADDR_CMD_NFCBUSY, host->nfc->base_cmd_regs)
> - & NFCADDR_CMD_NFCBUSY) {
> + while (nfc_readl(host->nfc->hsmc_regs, SR) & NFC_SR_BUSY) {
> if (time_after(jiffies, timeout)) {
> dev_err(host->dev,
> - "Time out to wait CMD_NFCBUSY ready!\n");
> + "Time out to wait for NFC ready!\n");
> return -ETIMEDOUT;
> }
> }
> diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h
> index 85b8ca6..4d5d262 100644
> --- a/drivers/mtd/nand/atmel_nand_nfc.h
> +++ b/drivers/mtd/nand/atmel_nand_nfc.h
> @@ -35,6 +35,7 @@
> #define NFC_CTRL_DISABLE (1 << 1)
>
> #define ATMEL_HSMC_NFC_SR 0x08 /* NFC Status Register */
> +#define NFC_SR_BUSY (1 << 8)
> #define NFC_SR_XFR_DONE (1 << 16)
> #define NFC_SR_CMD_DONE (1 << 17)
> #define NFC_SR_DTOE (1 << 20)
More information about the linux-mtd
mailing list