[PATCH v7 0/2] Add arm pl353 smc driver for xilinx zynq soc

Punnaiah Choudary Kalluri punnaiah.choudary.kalluri at xilinx.com
Mon Jun 8 11:07:35 PDT 2015


The following patches add arm pl353 static memory controller driver for
xilinx zynq soc. The arm pl353 smc supports two interfaces i.e nand and
nor/sram memory interfaces. The current implementation supports only a
single SMC instance and nand specific configuration.

xilinx zynq TRM link:
http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf

ARM pl353 smc TRM link:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0380g/
DDI0380G_smc_pl350_series_r2p1_trm.pdf

Punnaiah Choudary Kalluri (2):
  Devicetree: Add pl353 smc controller devicetree binding information
  memory: pl353: Add driver for arm pl353 static memory controller

 .../bindings/memory-controllers/pl353-smc.txt      |   37 ++
 drivers/memory/Kconfig                             |    7 +
 drivers/memory/Makefile                            |    1 +
 drivers/memory/pl353-smc.c                         |  559 ++++++++++++++++++++
 include/linux/memory/pl353-smc.h                   |   37 ++
 5 files changed, 641 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
 create mode 100644 drivers/memory/pl353-smc.c
 create mode 100644 include/linux/memory/pl353-smc.h

-- 
1.7.4




More information about the linux-mtd mailing list