[PATCH] nand: sunxi: fix write to USER_DATA reg
Boris Brezillon
boris.brezillon at free-electrons.com
Thu Jul 30 03:01:06 PDT 2015
The USER_DATA register cannot be accessed using byte accessors on A13
SoCs, thus triggering a bug when using memcpy_toio on this register.
Declare a temporary u32 variable to store the USER_DATA value and access
the register with writel.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/mtd/nand/sunxi_nand.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 6f93b29..5e374ab 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -624,6 +624,8 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
for (i = 0; i < ecc->steps; i++) {
+ u32 user_data;
+
if (i)
chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1);
@@ -632,16 +634,16 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
/* Fill OOB data in */
- if (oob_required) {
- tmp = 0xffffffff;
- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
- 4);
+ if (!oob_required) {
+ user_data = 0xffffffff;
} else {
- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE,
- chip->oob_poi + offset - mtd->writesize,
- 4);
+ memcpy(&user_data,
+ chip->oob_poi + layout->oobfree[i].offset, 4);
+ user_data = le32_to_cpu(user_data);
}
+ writel(user_data, nfc->regs + NFC_REG_USER_DATA_BASE);
+
chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -772,13 +774,13 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
/* Fill OOB data in */
if (oob_required) {
tmp = 0xffffffff;
- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
- 4);
} else {
- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob,
- 4);
+ memcpy(&tmp, oob, sizeof(tmp));
+ tmp = le32_to_cpu(tmp);
}
+ writel(tmp, nfc->regs + NFC_REG_USER_DATA_BASE);
+
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
(1 << 30);
writel(tmp, nfc->regs + NFC_REG_CMD);
--
1.9.1
More information about the linux-mtd
mailing list