[RFC PATCH 2/2] dt: spi: s3c64xx: add compatible to controller-data

Michal Suchanek hramrach at gmail.com
Wed Jul 29 11:21:34 PDT 2015


On 29 July 2015 at 19:16, Mark Brown <broonie at kernel.org> wrote:
> On Wed, Jul 29, 2015 at 06:19:24PM +0200, Michal Suchanek wrote:
>> On 29 July 2015 at 16:00, Mark Brown <broonie at kernel.org> wrote:
>
>> > I can't tell from this commit message what the issue you're trying to
>> > fix is, sorry.  Nodes without compatible strings are entirely normal and
>> > don't need compatible strings.  It sounds like a bug in whatever other
>> > driver is becoming confused.
>
>> The driver that gets confused is ofpart.
>
>> The two-line patch to allow it to just ignore controller-data has been
>> rejected on the basis that s3c64xx should use a compatible string
>> because ofpart monopolizes all nodes without compatible which are
>> children of a mtd device. Devicetrees containing such nodes that are
>> not partitions are presumably invalid and should be rejected when
>> ofpart is compiled into the kernel.
>
> That seems like an extremely limited binding, the normal thing here
> would be to create a specifically named node to contain the collection
> of subnodes like many PMICs do for their regulators.  As a fix I'd
> suggest just silently ignoring nodes it can't understand, or printing a
> warning if that's a serious issue.
>
>> >> +     if (!of_get_property(data_np, "compatible", NULL) ||
>> >> +         strcmp(of_get_property(data_np, "compatible", NULL),
>> >> +                "samsung,s3c-controller-data"))
>> >> +             dev_err(&spi->dev, "child node 'controller-data' does not have correct compatible\n");
>
>> > This will break all existing users which is not acceptable for
>> > mainline, we need to preserve compatibility with existing device trees.
>
>> It will not break anything. It will just spam dmesg.
>
> I'm confused - if all this change does is to spam dmesg then what's the
> point?

Presumably when your SPI NOR flash fails to probe this message will be
just above and you will look into the binding doc and add the
compatible.

Thanks

Michal



More information about the linux-mtd mailing list