[PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers

Alex Smith alex.smith at imgtec.com
Mon Jul 27 06:50:16 PDT 2015


Hi,

This series adds support for the BCH controller and NAND devices on
the Ingenic JZ4780 SoC.

Tested on the MIPS Creator Ci20 board. All dependencies are now in
mainline so it should be possible to compile test now.

This version of the series has been rebased on 4.2-rc4, and also adds
an additional patch to fix an issue that was encountered in the
external Ci20 3.18 kernel branch.

Review and feedback welcome.

Thanks,
Alex

Alex Smith (3):
  mtd: nand: increase ready wait timeout and report timeouts
  dt-bindings: binding for jz4780-{nand,bch}
  mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs

 .../bindings/mtd/ingenic,jz4780-nand.txt           |  57 ++++
 drivers/mtd/nand/Kconfig                           |   7 +
 drivers/mtd/nand/Makefile                          |   1 +
 drivers/mtd/nand/jz4780_bch.c                      | 354 +++++++++++++++++++
 drivers/mtd/nand/jz4780_bch.h                      |  42 +++
 drivers/mtd/nand/jz4780_nand.c                     | 376 +++++++++++++++++++++
 drivers/mtd/nand/nand_base.c                       |  15 +-
 7 files changed, 849 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
 create mode 100644 drivers/mtd/nand/jz4780_bch.c
 create mode 100644 drivers/mtd/nand/jz4780_bch.h
 create mode 100644 drivers/mtd/nand/jz4780_nand.c

-- 
2.4.6




More information about the linux-mtd mailing list