[PATCH v2 1/5] mtd: nand: Create a BBT flag to access bad block markers in raw mode

Archit Taneja architt at codeaurora.org
Tue Jul 21 03:34:42 PDT 2015


Some controllers can access the factory bad block marker from OOB only
when they read it in raw mode. When ECC is enabled, these controllers
discard reading/writing bad block markers, preventing access to them
altogether.

The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
This results in the nand driver's ecc->read_oob() op to be called, which
works with ECC enabled.

Create a new BBT option flag that tells nand_bbt to force the mode to
MTD_OPS_RAW. This would result in the correct op being called for the
underlying nand controller driver.

Signed-off-by: Archit Taneja <architt at codeaurora.org>
---
 drivers/mtd/nand/nand_base.c | 6 +++++-
 drivers/mtd/nand/nand_bbt.c  | 6 +++++-
 include/linux/mtd/bbm.h      | 7 +++++++
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ceb68ca..0a0c524 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -394,7 +394,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	} else {
 		ops.len = ops.ooblen = 1;
 	}
-	ops.mode = MTD_OPS_PLACE_OOB;
+
+	if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
+		ops.mode = MTD_OPS_RAW;
+	else
+		ops.mode = MTD_OPS_PLACE_OOB;
 
 	/* Write to first/last page(s) if necessary */
 	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 63a1a36..f2d89c9 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
 	ops.oobbuf = buf;
 	ops.ooboffs = 0;
 	ops.datbuf = NULL;
-	ops.mode = MTD_OPS_PLACE_OOB;
+
+	if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
+		ops.mode = MTD_OPS_RAW;
+	else
+		ops.mode = MTD_OPS_PLACE_OOB;
 
 	for (j = 0; j < numpages; j++) {
 		/*
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 36bb6a5..f67f84a 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -116,6 +116,13 @@ struct nand_bbt_descr {
 #define NAND_BBT_NO_OOB_BBM	0x00080000
 
 /*
+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
+ * when in RAW access mode
+ */
+#define NAND_BBT_ACCESS_BBM_RAW	0x00100000
+
+/*
  * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
  * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
  * in nand_chip.bbt_options.
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation




More information about the linux-mtd mailing list