[PATCH 6/7] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver

Cyrille Pitchen cyrille.pitchen at atmel.com
Thu Jul 16 08:27:53 PDT 2015


This patch documents the DT bindings for the driver of the Atmel QSPI
controller embedded inside sama5d2x SoCs.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen at atmel.com>
---
 .../devicetree/bindings/mtd/atmel-quadspi.txt      | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
new file mode 100644
index 000000000000..a0d60ac7ae10
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
@@ -0,0 +1,29 @@
+* Atmel Quad Serial Peripheral Interface (QSPI)
+
+Required properties:
+  - compatible : Should be "atmel,sama5d2-qspi"
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - interrupts : Should contain the interrupt for the device
+  - clocks : The clock needed by the QSPI controller
+  - #address-cells : should be 1
+  - #size-cells : should be 0
+
+Example:
+
+qspi0: qspi at f0020000 {
+	compatible = "atmel,sama5d2-qspi";
+	reg = <0xf0020000 0x100>,
+	      <0xd0000000 0x08000000>;
+	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+	clocks = <&qspi0_clk>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0_default>;
+	status = "okay";
+
+	m25p80 at 0 {
+		...
+	};
+};
-- 
1.8.2.2




More information about the linux-mtd mailing list