[PATCH 6/9] Documentation: bindings: add the Berlin nand controller compatible

[Antoine Tenart]

The Berlin nand controller support was introduced using the existing
pxa3xx nand driver. Add the Berlin specific compatible into the
documentation.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
index de8b517a5521..c76281c1f442 100644
--- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt
@@ -5,6 +5,7 @@ Required properties:
  - compatible:		Should be set to one of the following:
 			marvell,pxa3xx-nand
 			marvell,armada370-nand
+			marvell,berlin2-nand
  - reg: 		The register base for the controller
  - interrupts:		The interrupt to map
  - #address-cells:	Set to <1> if the node includes partitions
-- 
2.2.2