[PATCH 1/3] mtd: fsl-quadspi: Fix the error paths
Han Xu
xhnjupt at gmail.com
Fri Jan 23 11:35:31 PST 2015
On Thu, Jan 22, 2015 at 6:43 PM, Fabio Estevam <festevam at gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
>
> Jumping to 'map_failed' label is not correct at these points, as it misses to
> disable the clocks that were previously enabled.
>
> Jump to 'irq_failed' label instead that will correctly disable the clocks.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index a46bea3..a733bd2 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -890,24 +890,24 @@ static int fsl_qspi_probe(struct platform_device *pdev)
>
> ret = of_modalias_node(np, modalias, sizeof(modalias));
> if (ret < 0)
> - goto map_failed;
> + goto irq_failed;
>
> ret = of_property_read_u32(np, "spi-max-frequency",
> &q->clk_rate);
> if (ret < 0)
> - goto map_failed;
> + goto irq_failed;
>
> /* set the chip address for READID */
> fsl_qspi_set_base_addr(q, nor);
>
> ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
> if (ret)
> - goto map_failed;
> + goto irq_failed;
>
> ppdata.of_node = np;
> ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
> if (ret)
> - goto map_failed;
> + goto irq_failed;
>
> /* Set the correct NOR size now. */
> if (q->nor_size == 0) {
> --
> 1.9.1
Acked-by: Han Xu <han.xu at freescale.com>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
More information about the linux-mtd
mailing list