[PATCH 1/3] mtd: fsl-quadspi: Fix the error paths

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Jumping to 'map_failed' label is not correct at these points, as it misses to
disable the clocks that were previously enabled.

Jump to 'irq_failed' label instead that will correctly disable the clocks.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index a46bea3..a733bd2 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -890,24 +890,24 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 
 		ret = of_modalias_node(np, modalias, sizeof(modalias));
 		if (ret < 0)
-			goto map_failed;
+			goto irq_failed;
 
 		ret = of_property_read_u32(np, "spi-max-frequency",
 				&q->clk_rate);
 		if (ret < 0)
-			goto map_failed;
+			goto irq_failed;
 
 		/* set the chip address for READID */
 		fsl_qspi_set_base_addr(q, nor);
 
 		ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
 		if (ret)
-			goto map_failed;
+			goto irq_failed;
 
 		ppdata.of_node = np;
 		ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 		if (ret)
-			goto map_failed;
+			goto irq_failed;
 
 		/* Set the correct NOR size now. */
 		if (q->nor_size == 0) {
-- 
1.9.1