[PATCH] nandsim: remove unused STATE_DATAOUT_STATUS_M and OPT_SMARTMEDIA
Akinobu Mita
akinobu.mita at gmail.com
Sun Jan 11 05:07:48 PST 2015
There is no path to switch to STATE_DATAOUT_STATUS_M state, and
OPT_SMARTMEDIA is unused.
This is leftover from commit 0be718e5525a73557e76ea1c05b8001dde507049
("mtd: nand: remove a bunch of unused commands").
Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
Cc: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: Brian Norris <computersforpeace at gmail.com>
Cc: linux-mtd at lists.infradead.org
---
drivers/mtd/nand/nandsim.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index b9a5e8e..1e31ae0 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -247,7 +247,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
#define STATE_DATAOUT 0x00001000 /* waiting for page data output */
#define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */
#define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */
-#define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
#define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */
/* Previous operation is done, ready to accept new requests */
@@ -271,7 +270,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
#define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
#define OPT_PAGE512 0x00000002 /* 512-byte page chips */
#define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
-#define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */
#define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
#define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */
#define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
@@ -1110,8 +1108,6 @@ static char *get_state_name(uint32_t state)
return "STATE_DATAOUT_ID";
case STATE_DATAOUT_STATUS:
return "STATE_DATAOUT_STATUS";
- case STATE_DATAOUT_STATUS_M:
- return "STATE_DATAOUT_STATUS_M";
case STATE_READY:
return "STATE_READY";
case STATE_UNKNOWN:
@@ -1800,7 +1796,6 @@ static void switch_state(struct nandsim *ns)
break;
case STATE_DATAOUT_STATUS:
- case STATE_DATAOUT_STATUS_M:
ns->regs.count = ns->regs.num = 0;
break;
@@ -1940,7 +1935,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
}
if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
- || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
|| NS_STATE(ns->state) == STATE_DATAOUT) {
int row = ns->regs.row;
--
1.9.1
More information about the linux-mtd
mailing list