[PATCH v2] mtd:spi-nor: Add Altera EPCQ Driver

Viet Nga Dao vndao at altera.com
Sun Feb 22 17:30:09 PST 2015


Hi,
It has been nearly 2 weeks since i submitted this patch.  Could you
please help to review?
Thanks,

On Tue, Feb 17, 2015 at 9:33 AM, Viet Nga Dao <vndao at altera.com> wrote:
> Hi Brian,
> Could you please help me to review through this 2nd version?
>
> On Wed, Feb 11, 2015 at 12:53 PM, Viet Nga Dao <vndao at altera.com> wrote:
>> From: Viet Nga Dao <vndao at altera.com>
>>
>> Altera EPCQ Controller is a soft IP which enables access to Altera EPCQ and
>> EPCS flash chips. This patch adds driver for these devices.
>>
>> Signed-off-by: VIET NGA DAO <vndao at altera.com>
>>
>> ---
>> v2:
>> - Change to spi_nor structure
>> - Add lock and unlock functions for spi_nor
>> - Simplify the altera_epcq_lock function
>> - Replace reg by compatible in device tree
>> ---
>>  .../devicetree/bindings/mtd/altera_epcq.txt        |   45 ++
>>  drivers/mtd/spi-nor/Kconfig                        |   12 +
>>  drivers/mtd/spi-nor/Makefile                       |    1 +
>>  drivers/mtd/spi-nor/altera_epcq.c                  |  507 ++++++++++++++++++++
>>  drivers/mtd/spi-nor/altera_epcq.h                  |  116 +++++
>>  drivers/mtd/spi-nor/spi-nor.c                      |   86 ++++-
>>  include/linux/mtd/spi-nor.h                        |    3 +-
>>  7 files changed, 764 insertions(+), 6 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/mtd/altera_epcq.txt
>>  create mode 100644 drivers/mtd/spi-nor/altera_epcq.c
>>  create mode 100644 drivers/mtd/spi-nor/altera_epcq.h
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/altera_epcq.txt
>> b/Documentation/devicetree/bindings/mtd/altera_epcq.txt
>> new file mode 100644
>> index 0000000..b6b5e61
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mtd/altera_epcq.txt
>> @@ -0,0 +1,45 @@
>> +* MTD Altera EPCQ driver
>> +
>> +Required properties:
>> +- compatible: Should be "altr,epcq-1.0"
>> +- reg: Address and length of the register set  for the device. It contains
>> +  the information of registers in the same order as described by reg-names
>> +- reg-names: Should contain the reg names
>> +  "csr_base": Should contain the register configuration base address
>> +  "data_base": Should contain the data base address
>> +- is-epcs: boolean type.
>> +        If present, the device contains EPCS flashes.
>> +        Otherwise, it contains EPCQ flashes.
>> +- #address-cells: Must be <1>.
>> +- #size-cells: Must be <0>.
>> +- flash device tree subnode, there must be a node with the following fields:
>> +    - compatible: Should contain the flash name
>> +    - #address-cells: please refer to /mtd/partition.txt
>> +    - #size-cells: please refer to /mtd/partition.txt
>> +    For partitions inside each flash, please refer to /mtd/partition.txt
>> +
>> +Example:
>> +
>> +            epcq_controller_0: epcq at 0x000000000 {
>> +                compatible = "altr,epcq-1.0";
>> +                reg = <0x00000001 0x00000000 0x00000020>,
>> +                    <0x00000000 0x00000000 0x02000000>;
>> +                reg-names = "csr_base", "data_base";
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +                flash0: epcq256 at 0 {
>> +                    compatible = "epcq256";
>> +                    #address-cells = <1>;
>> +                    #size-cells = <1>;
>> +                    partition at 0 {
>> +                        /* 16 MB for raw data. */
>> +                        label = "EPCQ Flash 0 raw data";
>> +                        reg = <0x0 0x1000000>;
>> +                    };
>> +                    partition at 1000000 {
>> +                        /* 16 MB for jffs2 data. */
>> +                        label = "EPCQ Flash 0 JFFS 2";
>> +                        reg = <0x1000000 0x1000000>;
>> +                    };
>> +                };
>> +            }; //end epcq at 0x000000000 (epcq_controller_0)
>> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
>> index 64a4f0e..83178b9 100644
>> --- a/drivers/mtd/spi-nor/Kconfig
>> +++ b/drivers/mtd/spi-nor/Kconfig
>> @@ -28,4 +28,16 @@ config SPI_FSL_QUADSPI
>>        This enables support for the Quad SPI controller in master mode.
>>        We only connect the NOR to this controller now.
>>
>> +config SPI_ALTERA_EPCQ
>> +    tristate "Support Altera EPCQ/EPCS Flash chips"
>> +    depends on OF
>> +    help
>> +      This enables access to Altera EPCQ/EPCS flash chips, used for data
>> +      storage. See the driver source for the current list,
>> +      or to add other chips.
>> +
>> +      If you want to compile this driver as a module ( = code which can be
>> +      inserted in and removed from the running kernel whenever you want),
>> +      say M here and read <file:Documentation/kbuild/modules.txt>.
>> +
>>  endif # MTD_SPI_NOR
>> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
>> index 6a7ce14..ff9437b 100644
>> --- a/drivers/mtd/spi-nor/Makefile
>> +++ b/drivers/mtd/spi-nor/Makefile
>> @@ -1,2 +1,3 @@
>>  obj-$(CONFIG_MTD_SPI_NOR)    += spi-nor.o
>>  obj-$(CONFIG_SPI_FSL_QUADSPI)    += fsl-quadspi.o
>> +obj-$(CONFIG_SPI_ALTERA_EPCQ)        += altera_epcq.o
>> diff --git a/drivers/mtd/spi-nor/altera_epcq.c
>> b/drivers/mtd/spi-nor/altera_epcq.c
>> new file mode 100644
>> index 0000000..9db0d05
>> --- /dev/null
>> +++ b/drivers/mtd/spi-nor/altera_epcq.c
>> @@ -0,0 +1,507 @@
>> +/*
>> + * Copyright (C) 2014 Altera Corporation. All rights reserved
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/errno.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/ioport.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/kernel.h>
>> +#include <linux/log2.h>
>> +#include <linux/module.h>
>> +#include <linux/mod_devicetable.h>
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/mtd/spi-nor.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/sched.h>
>> +
>> +#include "altera_epcq.h"
>> +
>> +static int altera_epcq_write_reg(struct spi_nor *nor, u8 opcode, u8 *val,
>> +                 int len, int wr_en)
>> +{
>> +    return 0;
>> +}
>> +
>> +static int altera_epcq_read_reg(struct spi_nor *nor, u8 opcode, u8 *val,
>> +                int len)
>> +{
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    u32 data = 0;
>> +    u8 id[5];
>> +
>> +    switch (opcode) {
>> +    case SPINOR_OP_RDSR:
>> +        data = readl(dev->csr_base + EPCQ_SR_REG);
>> +        *val = (u8)data & EPCQ_SR_MASK;
>> +        break;
>> +    case SPINOR_OP_RDID:
>> +        /* opcode id */
>> +        if (dev->is_epcs) {
>> +            data = readl(dev->csr_base + EPCQ_SID_REG);
>> +            id[4] = EPCS_OPCODE_ID;
>> +        } else {
>> +            data = readl(dev->csr_base + EPCQ_RDID_REG);
>> +            id[4] = EPCQ_OPCODE_ID;
>> +        }
>> +        id[0] = 0xFF;    /* non standard jedec id */
>> +        id[1] = 0xFF;    /* non standard jedec id */
>> +        id[2] = 0xFF;    /* non standard jedec id */
>> +        id[3] = (u8)data & EPCQ_ID_MASK; /* device id */
>> +        memcpy(val, &id, 5);
>> +        break;
>> +    default:
>> +        break;
>> +    }
>> +    return 0;
>> +}
>> +
>> +static int altera_epcq_write_erase_check(struct spi_nor *nor,
>> +                     bool write_erase)
>> +{
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    u32 val;
>> +    u32 mask;
>> +
>> +    if (write_erase)
>> +        mask = EPCQ_ISR_ILLEGAL_WRITE_MASK;
>> +    else
>> +        mask = EPCQ_ISR_ILLEGAL_ERASE_MASK;
>> +
>> +    val = readl(dev->csr_base + EPCQ_ISR_REG);
>> +    if (val & mask) {
>> +        dev_err(nor->dev,
>> +            "write/erase failed, sector might be protected\n");
>> +        /* clear this status for next use */
>> +        writel(val, dev->csr_base + EPCQ_ISR_REG);
>> +        return -EIO;
>> +    }
>> +    return 0;
>> +}
>> +
>> +static int altera_epcq_addr_to_sector(struct mtd_info *mtd, int offset)
>> +{
>> +    if (mtd->erasesize_shift)
>> +        return offset >> mtd->erasesize_shift;
>> +    do_div(offset, mtd->erasesize);
>> +    return offset;
>> +}
>> +
>> +static int altera_epcq_erase(struct spi_nor *nor, loff_t offset)
>> +{
>> +
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    struct mtd_info *mtd = &flash->mtd;
>> +    u32 val;
>> +    int ret;
>> +    int sector_value;
>> +
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        return ret;
>> +
>> +    sector_value = altera_epcq_addr_to_sector(mtd, offset);
>> +    /* sanity check that block_offset is a valid sector number */
>> +    if (sector_value < 0)
>> +        return -EINVAL;
>> +
>> +    /* sector value should occupy bits 17:8 */
>> +    val = (sector_value << 8) & EPCQ_MEM_OP_SECTOR_VALUE_MASK;
>> +
>> +    /* sector erase commands occupies lower 2 bits */
>> +    val |= EPCQ_MEM_OP_SECTOR_ERASE_CMD;
>> +
>> +    /* write sector erase command to EPCQ_MEM_OP register */
>> +    writel(val, dev->csr_base + EPCQ_MEM_OP_REG);
>> +
>> +    /* wait the erase command is done then check whether
>> +     * write triggered a illegal write interrupt
>> +     */
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        return ret;
>> +
>> +    ret = altera_epcq_write_erase_check(nor, 0);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    return 0;
>> +}
>> +
>> +static int altera_epcq_read(struct spi_nor *nor, loff_t from, size_t len,
>> +                size_t *retlen, u_char *buf)
>> +{
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    int ret = 0;
>> +
>> +    mutex_lock(&flash->lock);
>> +    /* wait till previous write/erase is done. */
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +
>> +    memcpy_fromio(buf, dev->data_base + from, len);
>> +    *retlen = len;
>> +
>> +err:
>> +    mutex_unlock(&flash->lock);
>> +    return ret;
>> +}
>> +
>> +static void altera_epcq_write(struct spi_nor *nor, loff_t to, size_t len,
>> +                 size_t *retlen, const u_char *buf)
>> +{
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    int ret = 0;
>> +
>> +    mutex_lock(&flash->lock);
>> +
>> +    /* wait until finished previous write command */
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +
>> +    memcpy_toio(dev->data_base + to, buf, len);
>> +    *retlen += len;
>> +
>> +    /* wait until finished write command then
>> +     * check whether write triggered a illegal write interrupt
>> +     */
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +
>> +    ret = altera_epcq_write_erase_check(nor, 1);
>> +    if (ret < 0)
>> +        goto err;
>> +
>> +err:
>> +    mutex_unlock(&flash->lock);
>> +}
>> +
>> +static int altera_epcq_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
>> +{
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    struct mtd_info *mtd = &flash->mtd;
>> +    uint32_t offset = ofs;
>> +    int ret = 0;
>> +    u32 sector_start, sector_end;
>> +    u32 num_sectors;
>> +    u32 mem_op;
>> +    u32 sr_bp;
>> +    u32 sr_tb;
>> +
>> +    sector_start = offset;
>> +    sector_end = altera_epcq_addr_to_sector(mtd, offset + len);
>> +    num_sectors = mtd->size;
>> +    do_div(num_sectors, mtd->erasesize);
>> +
>> +    dev_dbg(nor->dev, "%s: sector start is %u,sector end is %u\n",
>> +        __func__, sector_start, sector_end);
>> +
>> +    mutex_lock(&flash->lock);
>> +    /* wait until finished previous write command. */
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +
>> +    if (sector_start >= num_sectors / 2) {
>> +        sr_bp = fls(num_sectors - 1 - sector_start) + 1;
>> +        sr_tb = 0;
>> +    } else if ((sector_end < num_sectors / 2) && ~dev->is_epcs) {
>> +        sr_bp = fls(sector_end) + 1;
>> +        sr_tb = 1;
>> +    } else {
>> +        sr_bp = 16;
>> +        sr_tb = 0;
>> +    }
>> +
>> +    mem_op = (sr_tb << 12) | (sr_bp << 8);
>> +    mem_op &= EPCQ_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
>> +    mem_op |= EPCQ_MEM_OP_SECTOR_PROTECT_CMD;
>> +    writel(mem_op, dev->csr_base + EPCQ_MEM_OP_REG);
>> +
>> +err:
>> +    mutex_unlock(&flash->lock);
>> +    return ret;
>> +}
>> +
>> +static int altera_epcq_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
>> +{
>> +    struct altera_epcq_flash *flash = nor->priv;
>> +    struct altera_epcq *dev = flash->priv;
>> +    int ret = 0;
>> +    u32 mem_op;
>> +
>> +    mutex_lock(&flash->lock);
>> +    /* wait until finished previous write command. */
>> +    ret = nor->wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +    dev_info(nor->dev, "Unlock all protected area\n");
>> +    mem_op = 0;
>> +    mem_op &= EPCQ_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
>> +    mem_op |= EPCQ_MEM_OP_SECTOR_PROTECT_CMD;
>> +    writel(mem_op, dev->csr_base + EPCQ_MEM_OP_REG);
>> +
>> +err:
>> +    mutex_unlock(&flash->lock);
>> +    return ret;
>> +}
>> +
>> +static void altera_epcq_chip_select(struct altera_epcq *dev, u32 bank)
>> +{
>> +    u32 val = 0;
>> +
>> +    switch (bank) {
>> +    case 0:
>> +        val = EPCQ_CHIP_SELECT_0;
>> +        break;
>> +    case 1:
>> +        val = EPCQ_CHIP_SELECT_1;
>> +        break;
>> +    case 2:
>> +        val = EPCQ_CHIP_SELECT_2;
>> +        break;
>> +    default:
>> +        return;
>> +    }
>> +    writel(val, dev->csr_base + EPCQ_CHIP_SELECT_REG);
>> +}
>> +
>> +
>> +static int altera_epcq_probe_config_dt(struct platform_device *pdev,
>> +                       struct device_node *np,
>> +                       struct altera_epcq_plat_data *pdata)
>> +{
>> +    struct device_node *pp = NULL;
>> +    struct resource *epcq_res;
>> +    int i = 0;
>> +
>> +    pdata->is_epcs = of_property_read_bool(np, "is-epcs");
>> +
>> +    epcq_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> +                        "csr_base");
>> +    pdata->csr_base = devm_ioremap_resource(&pdev->dev, epcq_res);
>> +    if (IS_ERR(pdata->csr_base)) {
>> +        dev_err(&pdev->dev, "%s: ERROR: failed to map csr base\n",
>> +            __func__);
>> +        return PTR_ERR(pdata->csr_base);
>> +    }
>> +
>> +    epcq_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> +                        "data_base");
>> +    pdata->data_base = devm_ioremap_resource(&pdev->dev, epcq_res);
>> +    if (IS_ERR(pdata->data_base)) {
>> +        dev_err(&pdev->dev, "%s: ERROR: failed to map data base\n",
>> +            __func__);
>> +        return PTR_ERR(pdata->data_base);
>> +    }
>> +
>> +    /* Fill structs for each subnode (flash device) */
>> +    for_each_available_child_of_node(np, pp) {
>> +        /* Read bank id from DT */
>> +        pdata->np[i] = pp;
>> +        i++;
>> +    }
>> +    pdata->num_flashes = i;
>> +    return 0;
>> +}
>> +
>> +static int altera_epcq_setup_banks(struct platform_device *pdev,
>> +                   u32 bank, struct device_node *np)
>> +{
>> +    struct altera_epcq *dev = platform_get_drvdata(pdev);
>> +    struct mtd_part_parser_data ppdata = {};
>> +    struct altera_epcq_flash *flash;
>> +    struct spi_nor *nor;
>> +    int ret = 0;
>> +    char modalias[40];
>> +
>> +    altera_epcq_chip_select(dev, bank);
>> +
>> +    if (bank > dev->num_flashes - 1)
>> +        return -EINVAL;
>> +
>> +    flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_KERNEL);
>> +    if (!flash)
>> +        return -ENOMEM;
>> +
>> +    mutex_init(&flash->lock);
>> +
>> +    dev->flash[bank] = flash;
>> +    nor = &flash->nor;
>> +    nor->mtd = &flash->mtd;
>> +    nor->dev = &pdev->dev;
>> +    nor->priv = flash;
>> +    flash->mtd.priv = nor;
>> +    flash->priv = dev;
>> +
>> +    /* spi nor framework*/
>> +    nor->read_reg = altera_epcq_read_reg;
>> +    nor->write_reg = altera_epcq_write_reg;
>> +    nor->read = altera_epcq_read;
>> +    nor->write = altera_epcq_write;
>> +    nor->erase = altera_epcq_erase;
>> +    nor->_lock = altera_epcq_lock;
>> +    nor->_unlock = altera_epcq_unlock;
>> +
>> +    if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
>> +        return -EINVAL;
>> +
>> +    ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
>> +    if (ret)
>> +        return ret;
>> +    ppdata.of_node = np;
>> +
>> +    return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, NULL, 0);
>> +}
>> +
>> +static int altera_epcq_probe(struct platform_device *pdev)
>> +{
>> +    struct device_node *np = pdev->dev.of_node;
>> +    struct altera_epcq_plat_data *pdata = NULL;
>> +    struct altera_epcq *dev;
>> +    int ret = 0;
>> +    int i;
>> +
>> +    if (!np) {
>> +        ret = -ENODEV;
>> +        dev_err(&pdev->dev, "no device found\n");
>> +        goto err;
>> +    }
>> +
>> +    pdata = devm_kzalloc(&pdev->dev,
>> +                 sizeof(struct altera_epcq_plat_data),
>> +                 GFP_KERNEL);
>> +
>> +    if (!pdata) {
>> +        ret = -ENOMEM;
>> +        goto err;
>> +    }
>> +
>> +    ret = altera_epcq_probe_config_dt(pdev, np, pdata);
>> +    if (ret) {
>> +        ret = -ENODEV;
>> +        dev_err(&pdev->dev, "probe fail\n");
>> +        goto err;
>> +    }
>> +
>> +    dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC);
>> +    if (!dev) {
>> +        ret = -ENOMEM;
>> +        goto err;
>> +    }
>> +    mutex_init(&dev->lock);
>> +    dev->is_epcs = pdata->is_epcs;
>> +    dev->csr_base = pdata->csr_base;
>> +    dev->data_base = pdata->data_base;
>> +
>> +    /* check number of flashes */
>> +    dev->num_flashes = pdata->num_flashes;
>> +    if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
>> +        dev_err(&pdev->dev, "exceeding max number of flashes\n");
>> +        dev->num_flashes = MAX_NUM_FLASH_CHIP;
>> +    }
>> +
>> +    /* check clock */
>> +    dev->clk = devm_clk_get(&pdev->dev, NULL);
>> +    if (IS_ERR(dev->clk)) {
>> +        ret = PTR_ERR(dev->clk);
>> +        goto err;
>> +    }
>> +    ret = clk_prepare_enable(dev->clk);
>> +    if (ret)
>> +        goto err;
>> +
>> +    platform_set_drvdata(pdev, dev);
>> +
>> +    /* loop for each flash which is connected to epcq */
>> +    for (i = 0; i < dev->num_flashes; i++) {
>> +        ret = altera_epcq_setup_banks(pdev, i, pdata->np[i]);
>> +        if (ret) {
>> +            dev_err(&pdev->dev, "bank setup failed\n");
>> +            goto err_bank_setup;
>> +        }
>> +    }
>> +
>> +    return 0;
>> +
>> +err_bank_setup:
>> +    clk_disable_unprepare(dev->clk);
>> +err:
>> +    return ret;
>> +}
>> +
>> +static int altera_epcq_remove(struct platform_device *pdev)
>> +{
>> +    struct altera_epcq *dev;
>> +    struct altera_epcq_flash *flash;
>> +    int ret, i;
>> +
>> +    dev = platform_get_drvdata(pdev);
>> +
>> +    /* clean up for all nor flash */
>> +    for (i = 0; i < dev->num_flashes; i++) {
>> +        flash = dev->flash[i];
>> +        if (!flash)
>> +            continue;
>> +
>> +        /* clean up mtd stuff */
>> +        ret = mtd_device_unregister(&flash->mtd);
>> +        if (ret)
>> +            dev_err(&pdev->dev, "error removing mtd\n");
>> +    }
>> +
>> +    clk_disable_unprepare(dev->clk);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct of_device_id altera_epcq_id_table[] = {
>> +    { .compatible = "altr,epcq-1.0" },
>> +    {}
>> +};
>> +MODULE_DEVICE_TABLE(of, altera_epcq_id_table);
>> +
>> +static struct platform_driver altera_epcq_driver = {
>> +    .driver = {
>> +        .name = ALTERA_EPCQ_RESOURCE_NAME,
>> +        .bus = &platform_bus_type,
>> +        .of_match_table = altera_epcq_id_table,
>> +    },
>> +    .probe = altera_epcq_probe,
>> +    .remove = altera_epcq_remove,
>> +};
>> +module_platform_driver(altera_epcq_driver);
>> +
>> +MODULE_AUTHOR("Viet Nga Dao <vndao at altera.com>");
>> +MODULE_DESCRIPTION("Altera EPCQ Driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/mtd/spi-nor/altera_epcq.h
>> b/drivers/mtd/spi-nor/altera_epcq.h
>> new file mode 100644
>> index 0000000..bc29f65
>> --- /dev/null
>> +++ b/drivers/mtd/spi-nor/altera_epcq.h
>> @@ -0,0 +1,116 @@
>> +/*
>> + * Copyright (C) 2014 Altera Corporation. All rights reserved
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __ALTERA_ECPQ_H
>> +#define __ALTERA_ECPQ_H
>> +
>> +#define ALTERA_EPCQ_RESOURCE_NAME        "altera_epcq"
>> +/* max possible slots for serial flash chip in the EPCQ controller */
>> +#define MAX_NUM_FLASH_CHIP    3
>> +#define EPCS_OPCODE_ID        1
>> +#define EPCQ_OPCODE_ID        2
>> +
>> +struct altera_epcq_plat_data {
>> +    void __iomem *csr_base;
>> +    void __iomem *data_base;
>> +    bool is_epcs;
>> +    u32 num_flashes;
>> +    struct device_node *np[MAX_NUM_FLASH_CHIP];
>> +};
>> +
>> +struct altera_epcq {
>> +    struct clk *clk;
>> +    bool is_epcs;
>> +    struct mutex lock;    /*device lock*/
>> +    void __iomem *csr_base;
>> +    void __iomem *data_base;
>> +    u32 num_flashes;
>> +    struct altera_epcq_flash *flash[MAX_NUM_FLASH_CHIP];
>> +};
>> +
>> +struct altera_epcq_flash {
>> +    struct mutex lock;    /*flash lock*/
>> +    struct mtd_info mtd;
>> +    struct spi_nor nor;
>> +    void *priv;
>> +};
>> +
>> +/* Define max times to check status register before we give up. */
>> +#define EPCQ_MAX_TIME_OUT            (40 * HZ)
>> +
>> +/* defines for status register */
>> +#define EPCQ_SR_REG                0x0
>> +#define EPCQ_SR_WIP_MASK            0x00000001
>> +#define EPCQ_SR_WIP                0x1
>> +#define EPCQ_SR_WEL                0x2
>> +#define EPCQ_SR_BP0                0x4
>> +#define EPCQ_SR_BP1                0x8
>> +#define EPCQ_SR_BP2                0x10
>> +#define EPCQ_SR_BP3                0x40
>> +#define EPCQ_SR_TB                0x20
>> +#define EPCQ_SR_MASK                0x0000000F
>> +
>> +/* defines for device id register */
>> +#define EPCQ_SID_REG                0x4
>> +#define EPCQ_RDID_REG                0x8
>> +#define EPCQ_ID_MASK                0x000000FF
>> +
>> +/*
>> + * EPCQ_MEM_OP register offset
>> + *
>> + * The EPCQ_MEM_OP register is used to do memory protect and erase operations
>> + *
>> + */
>> +#define EPCQ_MEM_OP_REG                0xC
>> +
>> +#define EPCQ_MEM_OP_CMD_MASK            0x00000003
>> +#define EPCQ_MEM_OP_BULK_ERASE_CMD        0x00000001
>> +#define EPCQ_MEM_OP_SECTOR_ERASE_CMD        0x00000002
>> +#define EPCQ_MEM_OP_SECTOR_PROTECT_CMD        0x00000003
>> +#define EPCQ_MEM_OP_SECTOR_VALUE_MASK        0x0003FF00
>> +#define EPCQ_MEM_OP_SECTOR_PROTECT_VALUE_MASK    0x00001F00
>> +#define EPCQ_MEM_OP_SECTOR_PROTECT_SHIFT    8
>> +/*
>> + * EPCQ_ISR register offset
>> + *
>> + * The EPCQ_ISR register is used to determine whether an invalid write or erase
>> + * operation trigerred an interrupt
>> + *
>> + */
>> +#define EPCQ_ISR_REG                0x10
>> +
>> +#define EPCQ_ISR_ILLEGAL_ERASE_MASK        0x00000001
>> +#define EPCQ_ISR_ILLEGAL_WRITE_MASK        0x00000002
>> +
>> +/*
>> + * EPCQ_IMR register offset
>> + *
>> + * The EPCQ_IMR register is used to mask the invalid erase or the invalid write
>> + * interrupts.
>> + *
>> + */
>> +#define EPCQ_IMR_REG                0x14
>> +#define EPCQ_IMR_ILLEGAL_ERASE_MASK        0x00000001
>> +
>> +#define EPCQ_IMR_ILLEGAL_WRITE_MASK        0x00000002
>> +
>> +#define EPCQ_CHIP_SELECT_REG            0x18
>> +#define EPCQ_CHIP_SELECT_MASK            0x00000007
>> +#define EPCQ_CHIP_SELECT_0            0x00000001
>> +#define EPCQ_CHIP_SELECT_1            0x00000002
>> +#define EPCQ_CHIP_SELECT_2            0x00000004
>> +
>> +#endif /* __ALTERA_ECPQ_H */
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index 3b8a411..bfbb274 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -330,7 +330,7 @@ erase_err:
>>      return ret;
>>  }
>>
>> -static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>> +static int stmicro_spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>>  {
>>      struct spi_nor *nor = mtd_to_spi_nor(mtd);
>>      uint32_t offset = ofs;
>> @@ -377,7 +377,8 @@ err:
>>      return ret;
>>  }
>>
>> -static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>> +static int stmicro_spi_nor_unlock(struct mtd_info *mtd, loff_t ofs,
>> +                  uint64_t len)
>>  {
>>      struct spi_nor *nor = mtd_to_spi_nor(mtd);
>>      uint32_t offset = ofs;
>> @@ -424,6 +425,48 @@ err:
>>      return ret;
>>  }
>>
>> +static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>> +{
>> +    struct spi_nor *nor = mtd_to_spi_nor(mtd);
>> +    int ret = 0;
>> +
>> +    ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
>> +    if (ret)
>> +        return ret;
>> +
>> +    /* Wait until finished previous command */
>> +    ret = wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +
>> +    ret = nor->_lock(nor, ofs, len);
>> +
>> +err:
>> +    spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
>> +    return ret;
>> +}
>> +
>> +static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>> +{
>> +    struct spi_nor *nor = mtd_to_spi_nor(mtd);
>> +    int ret = 0;
>> +
>> +    ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
>> +    if (ret)
>> +        return ret;
>> +
>> +    /* Wait until finished previous command */
>> +    ret = wait_till_ready(nor);
>> +    if (ret)
>> +        goto err;
>> +
>> +    ret = nor->_unlock(nor, ofs, len);
>> +
>> +err:
>> +    spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
>> +    return ret;
>> +}
>> +
>>  struct flash_info {
>>      /* JEDEC id zero means "no ID" (most older chips); otherwise it has
>>       * a high byte of zero plus three data bytes: the manufacturer id,
>> @@ -442,6 +485,7 @@ struct flash_info {
>>      u16        addr_width;
>>
>>      u16        flags;
>> +    u8        altera_flash_opcode_id;
>>  #define    SECT_4K            0x01    /* SPINOR_OP_BE_4K works uniformly */
>>  #define    SPI_NOR_NO_ERASE    0x02    /* No erase command needed */
>>  #define    SST_WRITE        0x04    /* use SST byte programming */
>> @@ -471,6 +515,16 @@ struct flash_info {
>>          .flags = (_flags),                    \
>>      })
>>
>> +
>> +#define EPCQ_INFO(_opcode_id, _ext_id, _sector_size, _n_sectors, _page_size) \
>> +    ((kernel_ulong_t)&(struct flash_info) {                \
>> +        .altera_flash_opcode_id = (_opcode_id),            \
>> +        .ext_id = (_ext_id),                    \
>> +        .sector_size = (_sector_size),                \
>> +        .n_sectors = (_n_sectors),                \
>> +        .page_size = (_page_size),                \
>> +    })
>> +
>>  /* NOTE: double check command sets and memory organization when you add
>>   * more nor chips.  This current list focusses on newer chips, which
>>   * have been converging on command sets which including JEDEC ID.
>> @@ -637,6 +691,17 @@ static const struct spi_device_id spi_nor_ids[] = {
>>      { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE |
>> SPI_NOR_NO_FR) },
>>      { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE |
>> SPI_NOR_NO_FR) },
>>      { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE |
>> SPI_NOR_NO_FR) },
>> +
>> +    /* Altera EPCQ/EPCS Flashes */
>> +    { "epcq16"  , EPCQ_INFO(2, 0x15, 0x10000, 32,   0x100) },
>> +    { "epcq32"  , EPCQ_INFO(2, 0x16, 0x10000, 64,   0x100) },
>> +    { "epcq64"  , EPCQ_INFO(2, 0x17, 0x10000, 128,  0x100) },
>> +    { "epcq128" , EPCQ_INFO(2, 0x18, 0x10000, 256,  0x100) },
>> +    { "epcq256" , EPCQ_INFO(2, 0x19, 0x10000, 512,  0x100) },
>> +    { "epcq512" , EPCQ_INFO(2, 0x20, 0x10000, 1024, 0x100) },
>> +    { "epcs16"  , EPCQ_INFO(1, 0x14, 0x10000, 32,   0x100) },
>> +    { "epcs64"  , EPCQ_INFO(1, 0x16, 0x10000, 128,  0x100) },
>> +    { "epcs128" , EPCQ_INFO(1, 0x18, 0x40000, 256,  0x100) },
>>      { },
>>  };
>>
>> @@ -666,6 +731,14 @@ static const struct spi_device_id
>> *spi_nor_read_id(struct spi_nor *nor)
>>          if (info->jedec_id == jedec) {
>>              if (info->ext_id == 0 || info->ext_id == ext_jedec)
>>                  return &spi_nor_ids[tmp];
>> +
>> +        /* altera epcq which is non jedec device
>> +         * use id[4] as opcode id to differentiate
>> +         * epcs and epcq devices
>> +         */
>> +        } else if (info->altera_flash_opcode_id == id[4] &&
>> +              info->ext_id == id[3]) {
>> +                return &spi_nor_ids[tmp];
>>          }
>>      }
>>      dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
>> @@ -904,7 +977,8 @@ static void spi_nor_shutdown(struct spi_nor *nor)
>>  static int spi_nor_check(struct spi_nor *nor)
>>  {
>>      if (!nor->dev || !nor->read || !nor->write ||
>> -        !nor->read_reg || !nor->write_reg || !nor->erase) {
>> +        !nor->read_reg || !nor->write_reg || !nor->erase ||
>> +        !nor->_lock || !nor->_unlock) {
>>          pr_err("spi-nor: please fill all the necessary fields!\n");
>>          return -EINVAL;
>>      }
>> @@ -939,9 +1013,8 @@ int spi_nor_scan(struct spi_nor *nor, const char
>> *name, enum read_mode mode)
>>
>>      info = (void *)id->driver_data;
>>
>> -    if (info->jedec_id) {
>> +    if (info->jedec_id || info->altera_flash_opcode_id) {
>>          const struct spi_device_id *jid;
>> -
>>          jid = nor->read_id(nor);
>>          if (IS_ERR(jid)) {
>>              return PTR_ERR(jid);
>> @@ -987,6 +1060,9 @@ int spi_nor_scan(struct spi_nor *nor, const char
>> *name, enum read_mode mode)
>>
>>      /* nor protection support for STmicro chips */
>>      if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
>> +        mtd->_lock = stmicro_spi_nor_lock;
>> +        mtd->_unlock = stmicro_spi_nor_unlock;
>> +    } else {
>>          mtd->_lock = spi_nor_lock;
>>          mtd->_unlock = spi_nor_unlock;
>>      }
>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> index 29d1a0d..042bed2 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -183,7 +183,8 @@ struct spi_nor {
>>      void (*write)(struct spi_nor *nor, loff_t to,
>>              size_t len, size_t *retlen, const u_char *write_buf);
>>      int (*erase)(struct spi_nor *nor, loff_t offs);
>> -
>> +    int (*_lock)(struct spi_nor *nor, loff_t offs, uint64_t len);
>> +    int (*_unlock)(struct spi_nor *nor, loff_t offs, uint64_t len);
>>      void *priv;
>>  };
>>
>> --
>> 1.7.7.4



More information about the linux-mtd mailing list