[PATCH v8 4/7] mtd: nand: gpmi: may use minimum required ecc for 744 oobsize NAND

[Huang Shijie]

On Wed, Dec 02, 2015 at 04:47:43PM -0600, Han Xu wrote:
> By default NAND driver will choose the highest ecc strength that oob
> could contain, in this case, for some 8K+744 NAND flash, the ecc
> strength will be up to 52bit, which beyonds the i.MX6QDL BCH capability
> (40bit).
>
> This patch allows the NAND driver try to use minimum required ecc
> strength if it failed to use the highest ecc, even without explicitly
> claiming "fsl,use-minimum-ecc" in dts.
>
> Signed-off-by: Han Xu <b45815 at freescale.com>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 26 ++++++++++++++------------
>  1 file changed, 14 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index ba5975f..298c1d1 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -136,7 +136,7 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
>   *
>   * We may have available oob space in this case.
>   */
> -static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
> +static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
>  {
>       struct bch_geometry *geo = &this->bch_geometry;
>       struct mtd_info *mtd = &this->mtd;
> @@ -145,7 +145,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
>       unsigned int block_mark_bit_offset;
>
>       if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
> -             return false;
> +             return -EINVAL;
>
>       switch (chip->ecc_step_ds) {
>       case SZ_512:
> @@ -158,19 +158,19 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
>               dev_err(this->dev,
>                       "unsupported nand chip. ecc bits : %d, ecc size : %d\n",
>                       chip->ecc_strength_ds, chip->ecc_step_ds);
> -             return false;
> +             return -EINVAL;
>       }
>       geo->ecc_chunk_size = chip->ecc_step_ds;
>       geo->ecc_strength = round_up(chip->ecc_strength_ds, 2);
>       if (!gpmi_check_ecc(this))
> -             return false;
> +             return -EINVAL;
>
>       /* Keep the C >= O */
>       if (geo->ecc_chunk_size < mtd->oobsize) {
>               dev_err(this->dev,
>                       "unsupported nand chip. ecc size: %d, oob size : %d\n",
>                       chip->ecc_step_ds, mtd->oobsize);
> -             return false;
> +             return -EINVAL;
>       }
>
>       /* The default value, see comment in the legacy_set_geometry(). */
> @@ -242,7 +242,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
>                               + ALIGN(geo->ecc_chunk_count, 4);
>
>       if (!this->swap_block_mark)
> -             return true;
> +             return 0;
>
>       /* For bit swap. */
>       block_mark_bit_offset = mtd->writesize * 8 -
> @@ -251,7 +251,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
>
>       geo->block_mark_byte_offset = block_mark_bit_offset / 8;
>       geo->block_mark_bit_offset  = block_mark_bit_offset % 8;
> -     return true;
> +     return 0;
>  }
>
>  static int legacy_set_geometry(struct gpmi_nand_data *this)
> @@ -285,7 +285,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
>       geo->ecc_strength = get_ecc_strength(this);
>       if (!gpmi_check_ecc(this)) {
>               dev_err(this->dev,
> -                     "required ecc strength of the NAND chip: %d is not supported by the GPMI controller (%d)\n",
> +                     "ecc strength: %d cannot be supported by the controller (%d)\n"
> +                     "try to use minimum ecc strength that NAND chip required\n",
>                       geo->ecc_strength,
>                       this->devdata->bch_max_ecc_strength);
>               return -EINVAL;
> @@ -366,10 +367,11 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
>
>  int common_nfc_set_geometry(struct gpmi_nand_data *this)
>  {
> -     if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")
> -             && set_geometry_by_ecc_info(this))
> -             return 0;
> -     return legacy_set_geometry(this);
> +     if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
> +                             || legacy_set_geometry(this))
> +             return set_geometry_by_ecc_info(this);
> +
> +     return 0;
>  }
>
>  struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
> --
> 1.9.1
>
Acked-by: Huang Shijie <shijie.huang at arm.com>
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.