[PATCH linux-next (v2) 3/3] mtd: part: Add BCM962368 CFE partitioning support
Brian Norris
computersforpeace at gmail.com
Thu Dec 10 16:05:44 PST 2015
On Thu, Dec 10, 2015 at 11:10:13PM +0000, Simon Arlott wrote:
> Add partitioning support for BCM963268 boards with CFE bootloaders.
> The following partitions are defined:
> "boot": CFE and nvram data
> "rootfs": Currently selected rootfs
> "data": Configuration data
> "rootfs1_update": Container for the whole flash area used
> for the first rootfs to allow it to be
> updated.
> "rootfs2_update": Container for the whole flash area used
> for the second rootfs to allow it to be
> updated.
> "rootfs_other": The other (not currently selected) rootfs
>
> Example:
> [ 1.904302] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
> [ 1.911000] nand: Macronix NAND 128MiB 3,3V 8-bit
> [ 1.915855] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
> [ 1.923797] bcm6368_nand 10000200.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
> [ 1.936994] Bad block table found at page 65472, version 0x01
> [ 1.944121] Bad block table found at page 65408, version 0x01
> [ 1.951166] nand_read_bbt: bad block at 0x000007480000
> [ 1.990043] bcm963268part: rootfs1: CFE boot tag found at 0x20000 with version 6, board type 963168VX and sequence number 2
> [ 2.003060] bcm963268part: rootfs2: CFE boot tag found at 0x4000000 with version 6, board type 963168VX and sequence number 1
> [ 2.015159] bcm963268part: CFE bootline selected latest image rootfs1
> [ 2.022080] 6 bcm963268part partitions found on MTD device brcmnand.0
> [ 2.042659] Creating 6 MTD partitions on "brcmnand.0":
> [ 2.048025] 0x000000000000-0x000000020000 : "boot"
> [ 2.062134] 0x000000040000-0x000001120000 : "rootfs"
> [ 2.077632] 0x000007b00000-0x000007f00000 : "data"
> [ 2.091363] 0x000000020000-0x000003ac0000 : "rootfs1_update"
> [ 2.106228] 0x000004000000-0x000007ac0000 : "rootfs2_update"
> [ 2.121093] 0x000004020000-0x000005060000 : "rootfs_other"
>
> The nvram contains the offset and size of the boot, rootfs1, rootfs2
> and data partitions. The presence of CFE and nvram is verified by
> reading from the boot partition which is assumed to be at offset 0
> and the process aborts if the nvram read indicates that this is not
> the case.
>
> There is bcm_tag information at the start of each rootfs that is used
> to determine which rootfs is newer and what its real offset/size is.
>
> The CFE bootline is used to select a rootfs.
>
> Signed-off-by: Simon Arlott <simon at fire.lp0.eu>
> ---
> v2: Use external struct bcm963xx_nvram definition for bcm963268part.
>
> Removed support for the nand partition number field, it's not a
> standard Broadcom field (was added by MitraStar Technology Corp.).
>
> drivers/mtd/Kconfig | 21 +++
> drivers/mtd/Makefile | 1 +
> drivers/mtd/bcm963268part.c | 326 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 348 insertions(+)
> create mode 100644 drivers/mtd/bcm963268part.c
>
> diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
> index 42cc953..63cb2db 100644
> --- a/drivers/mtd/Kconfig
> +++ b/drivers/mtd/Kconfig
> @@ -148,6 +148,27 @@ config MTD_BCM63XX_PARTS
> This provides partions parsing for BCM63xx devices with CFE
> bootloaders.
>
> +config MTD_BCM963268_PARTS
> + tristate "BCM963268 CFE partitioning support"
> + depends on BMIPS_GENERIC
It'd be nice if this didn't hard-depend on MIPS. Can we do COMPILE_TEST?
> + select CRC32
> + help
> + This provides partitions parsing for BCM963268 boards with CFE
> + bootloaders. The following partitions are defined:
> + "boot": CFE and nvram data
> + "rootfs": Currently selected rootfs
> + "data": Configuration data
> + "rootfs1_update": Container for the whole flash area used
> + for the first rootfs to allow it to be
> + updated.
> + "rootfs2_update": Container for the whole flash area used
> + for the second rootfs to allow it to be
> + updated.
> + "rootfs_other": The other (not currently selected) rootfs
> +
> + A decision is made regarding which of the two rootfs is to be
> + used based on the nvram data.
> +
> config MTD_BCM47XX_PARTS
> tristate "BCM47XX partitioning support"
> depends on BCM47XX || ARCH_BCM_5301X
> diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
> index 99bb9a1..f0f4140 100644
> --- a/drivers/mtd/Makefile
> +++ b/drivers/mtd/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
> obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
> obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
> obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
> +obj-$(CONFIG_MTD_BCM963268_PARTS) += bcm963268part.o
> obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
>
> # 'Users' - code which presents functionality to userspace.
> diff --git a/drivers/mtd/bcm963268part.c b/drivers/mtd/bcm963268part.c
> new file mode 100644
> index 0000000..a519499
> --- /dev/null
> +++ b/drivers/mtd/bcm963268part.c
> @@ -0,0 +1,326 @@
...
> +static bool bcm963268_parse_rootfs_tag(struct mtd_info *master,
> + const char *name, loff_t rootfs_part, u64 *rootfs_offset,
> + u64 *rootfs_size, unsigned int *rootfs_sequence)
> +{
> + struct bcm_tag *buf;
> + int ret;
> + size_t retlen;
> + u32 computed_crc;
> + bool rootfs_ok = false;
> +
> + *rootfs_offset = 0;
> + *rootfs_size = 0;
> + *rootfs_sequence = 0;
> +
> + buf = vmalloc(sizeof(struct bcm_tag));
> + if (!buf)
> + goto out;
> +
> + ret = mtd_read(master, rootfs_part, sizeof(*buf), &retlen, (void *)buf);
> + if (ret < 0)
> + goto out;
> +
> + if (retlen != sizeof(*buf))
> + goto out;
> +
> + computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
> + offsetof(struct bcm_tag, header_crc));
> + if (computed_crc == buf->header_crc) {
> + char *board_id = &buf->board_id[0];
> + char *tag_version = &buf->tag_version[0];
> +
> + /* Get rootfs offset and size from tag data */
> + kstrtou64(buf->flash_image_start, 10, rootfs_offset);
> + kstrtou64(buf->root_length, 10, rootfs_size);
> + kstrtouint(buf->dual_image, 10, rootfs_sequence);
drivers/mtd/bcm963268part.c: In function 'bcm963268_parse_rootfs_tag':
drivers/mtd/bcm963268part.c:186:12: warning: ignoring return value of 'kstrtou64', declared with attribute warn_unused_result [-Wunused-result]
drivers/mtd/bcm963268part.c:187:12: warning: ignoring return value of 'kstrtou64', declared with attribute warn_unused_result [-Wunused-result]
drivers/mtd/bcm963268part.c:188:13: warning: ignoring return value of 'kstrtouint', declared with attribute warn_unused_result [-Wunused-result]
Fixing these warnings should improve your robustness against malformed
input.
> +
> + pr_info("%s: CFE boot tag found at 0x%llx with version %s, board type %s and sequence number %u\n",
> + name, rootfs_part, tag_version, board_id,
> + *rootfs_sequence);
> +
> + /* Adjust for flash offset */
> + *rootfs_offset -= BCM63XX_EXTENDED_SIZE;
> +
> + /* Remove bcm_tag data from length */
> + *rootfs_size -= *rootfs_offset - rootfs_part;
> +
> + rootfs_ok = true;
> + } else {
> + pr_warn("%s: CFE boot tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
> + name, rootfs_part, buf->header_crc, computed_crc);
> + goto out;
> + }
> +
> +out:
> + vfree(buf);
> + return rootfs_ok;
> +}
Brian
More information about the linux-mtd
mailing list