[PATCH 20/23] mtd: onenand: switch to mtd_ooblayout_ops
Boris Brezillon
boris.brezillon at free-electrons.com
Mon Dec 7 14:26:15 PST 2015
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users. Modify the onenand drivers to switch to this
approach.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/mtd/onenand/onenand_base.c | 144 +++++++++++++++++++++----------------
include/linux/mtd/onenand.h | 2 -
2 files changed, 82 insertions(+), 64 deletions(-)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index b5937b7..5c7ff9f 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -68,21 +68,29 @@ MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP"
* flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page
* For now, we expose only 64 out of 80 ecc bytes
*/
-static struct nand_ecclayout flexonenand_oob_128 = {
- .eccbytes = 64,
- .eccpos = {
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 102, 103, 104, 105
- },
- .oobfree = {
- {2, 4}, {18, 4}, {34, 4}, {50, 4},
- {66, 4}, {82, 4}, {98, 4}, {114, 4}
- }
+static int flexonenand_eccpos(struct mtd_info *mtd, int eccbyte)
+{
+ if (eccbyte > 79)
+ return -ERANGE;
+
+ return ((eccbyte / 10) * 16) + 6 + (eccbyte % 10);
+}
+
+static int flexonenand_oobfree(struct mtd_info *mtd, int section,
+ struct nand_oobfree *oobfree)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ oobfree->offset = (section * 16) + 2;
+ oobfree->length = 4;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops flexonenand_ooblayout_ops = {
+ .eccpos = flexonenand_eccpos,
+ .oobfree = flexonenand_oobfree,
};
/*
@@ -91,56 +99,69 @@ static struct nand_ecclayout flexonenand_oob_128 = {
* Based on specification:
* 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010
*
- * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout)
- *
* oobfree uses the spare area fields marked as
* "Managed by internal ECC logic for Logical Sector Number area"
*/
-static struct nand_ecclayout onenand_oob_128 = {
- .eccbytes = 64,
- .eccpos = {
- 7, 8, 9, 10, 11, 12, 13, 14, 15,
- 23, 24, 25, 26, 27, 28, 29, 30, 31,
- 39, 40, 41, 42, 43, 44, 45, 46, 47,
- 55, 56, 57, 58, 59, 60, 61, 62, 63,
- 71, 72, 73, 74, 75, 76, 77, 78, 79,
- 87, 88, 89, 90, 91, 92, 93, 94, 95,
- 103, 104, 105, 106, 107, 108, 109, 110, 111,
- 119
- },
- .oobfree = {
- {2, 3}, {18, 3}, {34, 3}, {50, 3},
- {66, 3}, {82, 3}, {98, 3}, {114, 3}
- }
+static int onenand_oob_128_eccpos(struct mtd_info *mtd, int eccbyte)
+{
+ if (eccbyte >= 72)
+ return -ERANGE;
+
+ return ((eccbyte / 9) * 16) + 7 + (eccbyte % 9);
+}
+
+static int onenand_oob_128_oobfree(struct mtd_info *mtd, int section,
+ struct nand_oobfree *oobfree)
+{
+ if (section >= 8)
+ return -ERANGE;
+
+ oobfree->offset = (section * 16) + 2;
+ oobfree->length = 3;
+
+ return 0;
+}
+
+const struct mtd_ooblayout_ops onenand_oob_128_ooblayout_ops = {
+ .eccpos = onenand_oob_128_eccpos,
+ .oobfree = onenand_oob_128_oobfree,
};
/**
- * onenand_oob_64 - oob info for large (2KB) page
+ * onenand_oob_32_64 - oob info for large (2KB) page
*/
-static struct nand_ecclayout onenand_oob_64 = {
- .eccbytes = 20,
- .eccpos = {
- 8, 9, 10, 11, 12,
- 24, 25, 26, 27, 28,
- 40, 41, 42, 43, 44,
- 56, 57, 58, 59, 60,
- },
- .oobfree = {
- {2, 3}, {14, 2}, {18, 3}, {30, 2},
- {34, 3}, {46, 2}, {50, 3}, {62, 2}
+static int onenand_oob_32_64_eccpos(struct mtd_info *mtd, int eccbyte)
+{
+ int eccbytes = (mtd->oobsize / 32) * 10;
+
+ if (eccbyte >= eccbytes)
+ return -ERANGE;
+
+ return ((eccbyte / 5) * 16) + 8 + (eccbyte % 5);
+}
+
+static int onenand_oob_32_64_oobfree(struct mtd_info *mtd, int section,
+ struct nand_oobfree *oobfree)
+{
+ int sections = (mtd->oobsize / 32) * 2;
+
+ if (section >= sections)
+ return -ERANGE;
+
+ if (section & 1) {
+ oobfree->offset = ((section - 1) * 16) + 14;
+ oobfree->length = 2;
+ } else {
+ oobfree->offset = (section * 16) + 2;
+ oobfree->length = 3;
}
-};
-/**
- * onenand_oob_32 - oob info for middle (1KB) page
- */
-static struct nand_ecclayout onenand_oob_32 = {
- .eccbytes = 10,
- .eccpos = {
- 8, 9, 10, 11, 12,
- 24, 25, 26, 27, 28,
- },
- .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
+ return 0;
+}
+
+const struct mtd_ooblayout_ops onenand_oob_32_64_ooblayout_ops = {
+ .eccpos = onenand_oob_32_64_eccpos,
+ .oobfree = onenand_oob_32_64_oobfree,
};
static const unsigned char ffchars[] = {
@@ -4019,22 +4040,22 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
switch (mtd->oobsize) {
case 128:
if (FLEXONENAND(this)) {
- this->ecclayout = &flexonenand_oob_128;
+ mtd_set_ooblayout(mtd, &flexonenand_ooblayout_ops);
mtd->subpage_sft = 0;
} else {
- this->ecclayout = &onenand_oob_128;
+ mtd_set_ooblayout(mtd, &onenand_oob_128_ooblayout_ops);
mtd->subpage_sft = 2;
}
if (ONENAND_IS_NOP_1(this))
mtd->subpage_sft = 0;
break;
case 64:
- this->ecclayout = &onenand_oob_64;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
mtd->subpage_sft = 2;
break;
case 32:
- this->ecclayout = &onenand_oob_32;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
mtd->subpage_sft = 1;
break;
@@ -4043,7 +4064,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
__func__, mtd->oobsize);
mtd->subpage_sft = 0;
/* To prevent kernel oops */
- this->ecclayout = &onenand_oob_32;
+ mtd_set_ooblayout(mtd, &onenand_oob_32_64_ooblayout_ops);
break;
}
@@ -4059,7 +4080,6 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
mtd_oobfree(mtd, i++, &oobfree))
mtd->oobavail += oobfree.length;
- mtd_set_ecclayout(mtd, this->ecclayout);
mtd->ecc_strength = 1;
/* Fill in remaining MTD driver data */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 4596503..0aaa98b 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -80,7 +80,6 @@ struct onenand_bufferram {
* @page_buf: [INTERN] page main data buffer
* @oob_buf: [INTERN] page oob data buffer
* @subpagesize: [INTERN] holds the subpagesize
- * @ecclayout: [REPLACEABLE] the default ecc placement scheme
* @bbm: [REPLACEABLE] pointer to Bad Block Management
* @priv: [OPTIONAL] pointer to private chip date
*/
@@ -134,7 +133,6 @@ struct onenand_chip {
#endif
int subpagesize;
- struct nand_ecclayout *ecclayout;
void *bbm;
--
2.1.4
More information about the linux-mtd
mailing list