[PATCH] mtd: nand: sunxi_nand.c: Select the chip in sunxi_nand_chip_init_timings()

[Boris Brezillon]

Hi Stephan,

On Fri, 28 Aug 2015 14:45:21 +0200
Stefan Roese <sr at denx.de> wrote:

> nand_scan_ident() leaves the chip deselected. So just issuing some commands
> from the sunxi driver does not work. We need to select the chip before
> writing the commands to the NAND device. This patch takes care of this.
> 
> Set the new timing on all dies implemented as suggested by Boris.
> 
> This was detected on the in-circuit ICnova-A20 SoM equipped with the
> Micron MT29F32G08CBACAWP (4GiB) ONFI NAND device.

Thanks for the fix.

Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>

> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Boris Brezillon <boris.brezillon at free-electrons.com>
> Cc: Hans de Goede <hdegoede at redhat.com>
> Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
> Cc: Roy Spliet <r.spliet at ultimaker.com>
> Cc: Brian Norris <computersforpeace at gmail.com>
> ---
>  drivers/mtd/nand/sunxi_nand.c | 16 +++++++++++-----
>  1 file changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
> index f97a58d..6e7941b 100644
> --- a/drivers/mtd/nand/sunxi_nand.c
> +++ b/drivers/mtd/nand/sunxi_nand.c
> @@ -978,17 +978,23 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
>  		mode = chip->nand.onfi_timing_mode_default;
>  	} else {
>  		uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
> +		int i;
>  
>  		mode = fls(mode) - 1;
>  		if (mode < 0)
>  			mode = 0;
>  
>  		feature[0] = mode;
> -		ret = chip->nand.onfi_set_features(&chip->mtd, &chip->nand,
> -						ONFI_FEATURE_ADDR_TIMING_MODE,
> -						feature);
> -		if (ret)
> -			return ret;
> +		for (i = 0; i < chip->nsels; i++) {
> +			chip->nand.select_chip(&chip->mtd, i);
> +			ret = chip->nand.onfi_set_features(&chip->mtd,
> +						&chip->nand,
> + 						ONFI_FEATURE_ADDR_TIMING_MODE,
> + 						feature);
> +			chip->nand.select_chip(&chip->mtd, -1);
> +			if (ret)
> +				return ret;
> +		}
>  	}
>  
>  	timings = onfi_async_timing_mode_to_sdr_timings(mode);



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com