[PATCH] mtd: nand: omap2: Rename shippable module to omap2_nand

[Roger Quadros]

As both omap2 onenand and omap2 nand driver modules are
named the same i.e. "omap2.ko", only one of them gets shipped
during MODPOST if both are configured as loadable modules.

To avoid this ambiguity let's ship the omap2 nand
driver as "omap2_nand.ko"

Reported by Pierre Neyron via github
https://github.com/beagleboard/linux/issues/40

Cc: Robert Nelson <robertcnelson at gmail.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 drivers/mtd/nand/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 1f897ec..075a027 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -26,7 +26,8 @@ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
-obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
+omap2_nand-objs := omap2.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
-- 
2.1.4