[PATCH] mtd: spi-nor: stop (ab)using struct spi_device_id
Rafał Miłecki
zajec5 at gmail.com
Mon Aug 10 12:39:03 PDT 2015
Using struct spi_device_id for storing list of flash devices comes from
early SPI NOR framework days. Thanks to the commit 70f3ce0510af ("mtd:
spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id")
we can stop using spi_device_id and just switch to our own struct.
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
drivers/mtd/spi-nor/spi-nor.c | 62 +++++++++++++++++++------------------------
1 file changed, 27 insertions(+), 35 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 47516d3..04f5934 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -29,6 +29,8 @@
#define SPI_NOR_MAX_ID_LEN 6
struct flash_info {
+ char *name;
+
/*
* This array stores the ID bytes.
* The first three bytes are the JEDIC ID.
@@ -59,7 +61,7 @@ struct flash_info {
#define JEDEC_MFR(info) ((info)->id[0])
-static const struct spi_device_id *spi_nor_match_id(const char *name);
+static const struct flash_info *spi_nor_match_id(const char *name);
/*
* Read the status register, returning its value in the location
@@ -169,7 +171,7 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
}
/* Enable/disable 4-byte addressing mode. */
-static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
+static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
int enable)
{
int status;
@@ -469,7 +471,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
/* Used when the "_ext_id" is two bytes at most */
#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
- ((kernel_ulong_t)&(struct flash_info) { \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
@@ -481,11 +482,9 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .flags = (_flags), \
- })
+ .flags = (_flags),
#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
- ((kernel_ulong_t)&(struct flash_info) { \
.id = { \
((_jedec_id) >> 16) & 0xff, \
((_jedec_id) >> 8) & 0xff, \
@@ -498,17 +497,14 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
- .flags = (_flags), \
- })
+ .flags = (_flags),
#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
- ((kernel_ulong_t)&(struct flash_info) { \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
.addr_width = (_addr_width), \
- .flags = (_flags), \
- })
+ .flags = (_flags),
/* NOTE: double check command sets and memory organization when you add
* more nor chips. This current list focusses on newer chips, which
@@ -521,7 +517,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
* For historical (and compatibility) reasons (before we got above config) some
* old entries may be missing 4K flag.
*/
-static const struct spi_device_id spi_nor_ids[] = {
+static const struct flash_info spi_nor_ids[] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
{ "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) },
{ "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
@@ -702,11 +698,11 @@ static const struct spi_device_id spi_nor_ids[] = {
{ },
};
-static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
{
int tmp;
u8 id[SPI_NOR_MAX_ID_LEN];
- struct flash_info *info;
+ const struct flash_info *info;
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
@@ -715,7 +711,7 @@ static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
}
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
- info = (void *)spi_nor_ids[tmp].driver_data;
+ info = &spi_nor_ids[tmp];
if (info->id_len) {
if (!memcmp(info->id, id, info->id_len))
return &spi_nor_ids[tmp];
@@ -961,7 +957,7 @@ static int micron_quad_enable(struct spi_nor *nor)
return 0;
}
-static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
+static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
{
int status;
@@ -1003,8 +999,7 @@ static int spi_nor_check(struct spi_nor *nor)
int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
- const struct spi_device_id *id = NULL;
- struct flash_info *info;
+ const struct flash_info *info = NULL;
struct device *dev = nor->dev;
struct mtd_info *mtd = nor->mtd;
struct device_node *np = dev->of_node;
@@ -1016,26 +1011,24 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
return ret;
if (name)
- id = spi_nor_match_id(name);
+ info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
- if (!id)
- id = spi_nor_read_id(nor);
- if (IS_ERR_OR_NULL(id))
+ if (!info)
+ info = spi_nor_read_id(nor);
+ if (IS_ERR_OR_NULL(info))
return -ENOENT;
- info = (void *)id->driver_data;
-
/*
* If caller has specified name of flash model that can normally be
* detected using JEDEC, let's verify it.
*/
if (name && info->id_len) {
- const struct spi_device_id *jid;
+ const struct flash_info *jinfo;
- jid = spi_nor_read_id(nor);
- if (IS_ERR(jid)) {
- return PTR_ERR(jid);
- } else if (jid != id) {
+ jinfo = spi_nor_read_id(nor);
+ if (IS_ERR(jinfo)) {
+ return PTR_ERR(jinfo);
+ } else if (jinfo != info) {
/*
* JEDEC knows better, so overwrite platform ID. We
* can't trust partitions any longer, but we'll let
@@ -1044,9 +1037,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
* information, even if it's not 100% accurate.
*/
dev_warn(dev, "found %s, expected %s\n",
- jid->name, id->name);
- id = jid;
- info = (void *)jid->driver_data;
+ jinfo->name, info->name);
+ info = jinfo;
}
}
@@ -1196,7 +1188,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
nor->read_dummy = spi_nor_read_dummy_cycles(nor);
- dev_info(dev, "%s (%lld Kbytes)\n", id->name,
+ dev_info(dev, "%s (%lld Kbytes)\n", info->name,
(long long)mtd->size >> 10);
dev_dbg(dev,
@@ -1219,9 +1211,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
}
EXPORT_SYMBOL_GPL(spi_nor_scan);
-static const struct spi_device_id *spi_nor_match_id(const char *name)
+static const struct flash_info *spi_nor_match_id(const char *name)
{
- const struct spi_device_id *id = spi_nor_ids;
+ const struct flash_info *id = spi_nor_ids;
while (id->name[0]) {
if (!strcmp(name, id->name))
--
1.8.4.5
More information about the linux-mtd
mailing list