[PATCH v6 1/2] Devicetree: Add pl353 smc controller devicetree binding information

[Punnaiah Choudary Kalluri]

Add pl353 static memory controller devicetree binding information.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia at xilinx.com>
---
Changes in v6:
 - None
Changes in v5:
 - Removed timing properties
Changes in v4:
 - none
Changes in v3:
 - none
Changes in v2:
 - modified timing binding info as per onfi timing parameters
 - add suffix nano second as timing unit
 - modified the clock names as per the IP spec
---
 .../bindings/memory-controllers/pl353-smc.txt      |   37 ++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt

diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
new file mode 100644
index 0000000..a868f94
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -0,0 +1,37 @@
+Device tree bindings for ARM PL353 static memory controller
+
+PL353 static memory controller supports two kinds of memory
+interfaces. i.e NAND and SRAM/NOR interfaces.
+The actual devices are instantiated from the child nodes of pl353 smc node.
+
+Required properties:
+- compatible		: Should be "arm,pl353-smc-r2p1"
+- reg			: Controller registers map and length.
+- clock-names		: List of input clock names - "memclk", "aclk"
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+- address-cells	: Address cells, must be 1.
+- size-cells		: Size cells. Must be 1.
+
+Child nodes:
+ For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
+supported as child nodes.
+
+for nand partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+	pl353smcc_0: pl353smcc at e000e000 {
+			compatible = "arm,pl353-smcc-r2p1"
+			clock-names = "memclk", "aclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			reg = <0xe000e000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			nand_0: nand at e1000000 {
+				compatible = "arm,pl353-nand-r2p1"
+				reg = <0xe1000000 0x1000000>;
+				(...)
+			};
+	};
-- 
1.7.4