[PATCH 7/7] docg3: Fix miuse of seq_printf return value

Joe Perches joe at perches.com
Mon Sep 29 16:08:27 PDT 2014


seq_printf doesn't return a useful value, so remove
these misuses.

Signed-off-by: Joe Perches <joe at perches.com>
---
 drivers/mtd/devices/docg3.c | 112 ++++++++++++++++++++------------------------
 1 file changed, 52 insertions(+), 60 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 21cc4b6..68ff83c 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1655,22 +1655,21 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
 
-	int pos = 0;
 	u8 fctrl;
 
 	mutex_lock(&docg3->cascade->lock);
 	fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
 	mutex_unlock(&docg3->cascade->lock);
 
-	pos += seq_printf(s,
-		 "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
-		 fctrl,
-		 fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
-		 fctrl & DOC_CTRL_CE ? "active" : "inactive",
-		 fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
-		 fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
-		 fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
-	return pos;
+	seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
+		   fctrl,
+		   fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
+		   fctrl & DOC_CTRL_CE ? "active" : "inactive",
+		   fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
+		   fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
+		   fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
+
+	return 0;
 }
 DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
 
@@ -1678,58 +1677,56 @@ static int dbg_asicmode_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
 
-	int pos = 0, pctrl, mode;
+	int pctrl, mode;
 
 	mutex_lock(&docg3->cascade->lock);
 	pctrl = doc_register_readb(docg3, DOC_ASICMODE);
 	mode = pctrl & 0x03;
 	mutex_unlock(&docg3->cascade->lock);
 
-	pos += seq_printf(s,
-			 "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
-			 pctrl,
-			 pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
-			 pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
-			 pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
-			 pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
-			 pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
-			 mode >> 1, mode & 0x1);
+	seq_printf(s,
+		   "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
+		   pctrl,
+		   pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
+		   pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
+		   pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
+		   pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
+		   pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
+		   mode >> 1, mode & 0x1);
 
 	switch (mode) {
 	case DOC_ASICMODE_RESET:
-		pos += seq_puts(s, "reset");
+		seq_puts(s, "reset");
 		break;
 	case DOC_ASICMODE_NORMAL:
-		pos += seq_puts(s, "normal");
+		seq_puts(s, "normal");
 		break;
 	case DOC_ASICMODE_POWERDOWN:
-		pos += seq_puts(s, "powerdown");
+		seq_puts(s, "powerdown");
 		break;
 	}
-	pos += seq_puts(s, ")\n");
-	return pos;
+	seq_puts(s, ")\n");
+	return 0;
 }
 DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
 
 static int dbg_device_id_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
-	int pos = 0;
 	int id;
 
 	mutex_lock(&docg3->cascade->lock);
 	id = doc_register_readb(docg3, DOC_DEVICESELECT);
 	mutex_unlock(&docg3->cascade->lock);
 
-	pos += seq_printf(s, "DeviceId = %d\n", id);
-	return pos;
+	seq_printf(s, "DeviceId = %d\n", id);
+	return 0;
 }
 DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
 
 static int dbg_protection_show(struct seq_file *s, void *p)
 {
 	struct docg3 *docg3 = (struct docg3 *)s->private;
-	int pos = 0;
 	int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
 
 	mutex_lock(&docg3->cascade->lock);
@@ -1742,45 +1739,40 @@ static int dbg_protection_show(struct seq_file *s, void *p)
 	dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
 	mutex_unlock(&docg3->cascade->lock);
 
-	pos += seq_printf(s, "Protection = 0x%02x (",
-			 protect);
+	seq_printf(s, "Protection = 0x%02x (", protect);
 	if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
-		pos += seq_puts(s, "FOUNDRY_OTP_LOCK,");
+		seq_puts(s, "FOUNDRY_OTP_LOCK,");
 	if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
-		pos += seq_puts(s, "CUSTOMER_OTP_LOCK,");
+		seq_puts(s, "CUSTOMER_OTP_LOCK,");
 	if (protect & DOC_PROTECT_LOCK_INPUT)
-		pos += seq_puts(s, "LOCK_INPUT,");
+		seq_puts(s, "LOCK_INPUT,");
 	if (protect & DOC_PROTECT_STICKY_LOCK)
-		pos += seq_puts(s, "STICKY_LOCK,");
+		seq_puts(s, "STICKY_LOCK,");
 	if (protect & DOC_PROTECT_PROTECTION_ENABLED)
-		pos += seq_puts(s, "PROTECTION ON,");
+		seq_puts(s, "PROTECTION ON,");
 	if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
-		pos += seq_puts(s, "IPL_DOWNLOAD_LOCK,");
+		seq_puts(s, "IPL_DOWNLOAD_LOCK,");
 	if (protect & DOC_PROTECT_PROTECTION_ERROR)
-		pos += seq_puts(s, "PROTECT_ERR,");
+		seq_puts(s, "PROTECT_ERR,");
 	else
-		pos += seq_puts(s, "NO_PROTECT_ERR");
-	pos += seq_puts(s, ")\n");
-
-	pos += seq_printf(s, "DPS0 = 0x%02x : "
-			 "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
-			 "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
-			 dps0, dps0_low, dps0_high,
-			 !!(dps0 & DOC_DPS_OTP_PROTECTED),
-			 !!(dps0 & DOC_DPS_READ_PROTECTED),
-			 !!(dps0 & DOC_DPS_WRITE_PROTECTED),
-			 !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
-			 !!(dps0 & DOC_DPS_KEY_OK));
-	pos += seq_printf(s, "DPS1 = 0x%02x : "
-			 "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
-			 "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
-			 dps1, dps1_low, dps1_high,
-			 !!(dps1 & DOC_DPS_OTP_PROTECTED),
-			 !!(dps1 & DOC_DPS_READ_PROTECTED),
-			 !!(dps1 & DOC_DPS_WRITE_PROTECTED),
-			 !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
-			 !!(dps1 & DOC_DPS_KEY_OK));
-	return pos;
+		seq_puts(s, "NO_PROTECT_ERR");
+	seq_puts(s, ")\n");
+
+	seq_printf(s, "DPS0 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+		   dps0, dps0_low, dps0_high,
+		   !!(dps0 & DOC_DPS_OTP_PROTECTED),
+		   !!(dps0 & DOC_DPS_READ_PROTECTED),
+		   !!(dps0 & DOC_DPS_WRITE_PROTECTED),
+		   !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
+		   !!(dps0 & DOC_DPS_KEY_OK));
+	seq_printf(s, "DPS1 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
+		   dps1, dps1_low, dps1_high,
+		   !!(dps1 & DOC_DPS_OTP_PROTECTED),
+		   !!(dps1 & DOC_DPS_READ_PROTECTED),
+		   !!(dps1 & DOC_DPS_WRITE_PROTECTED),
+		   !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
+		   !!(dps1 & DOC_DPS_KEY_OK));
+	return 0;
 }
 DEBUGFS_RO_ATTR(protection, dbg_protection_show);
 
-- 
1.8.1.2.459.gbcd45b4.dirty




More information about the linux-mtd mailing list