[PATCH v3 1/3] mtd: nand: gpmi: add gpmi_move_bits function
Boris BREZILLON
boris.brezillon at free-electrons.com
Tue Sep 23 07:07:34 PDT 2014
Add a new function to move bits (not bytes) from a memory region to
another one.
This function is similar to memmove except it acts at bit level.
This function is needed to implement GPMI raw access functions, given the
fact that ECC engine does not pad ECC bits to the next byte boundary.
Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 88 ++++++++++++++++++++++++++++++++++
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 4 ++
2 files changed, 92 insertions(+)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 87e658c..e2f706a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -1353,3 +1353,91 @@ int gpmi_read_page(struct gpmi_nand_data *this,
set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
return start_dma_with_bch_irq(this, desc);
}
+
+void gpmi_move_bits(u8 *dst, size_t dst_bit_off,
+ const u8 *src, size_t src_bit_off,
+ size_t nbits)
+{
+ size_t i;
+ size_t nbytes;
+ u32 src_byte = 0;
+
+ src += src_bit_off / 8;
+ src_bit_off %= 8;
+
+ dst += dst_bit_off / 8;
+ dst_bit_off %= 8;
+
+ if (src_bit_off) {
+ src_byte = src[0] >> src_bit_off;
+ nbits -= 8 - src_bit_off;
+ src++;
+ }
+
+ nbytes = nbits / 8;
+
+ if (dst_bit_off) {
+ if (src_bit_off <= dst_bit_off) {
+ dst[0] &= GENMASK(dst_bit_off - 1, 0);
+ dst[0] |= src_byte << dst_bit_off;
+ src_bit_off += (8 - dst_bit_off);
+ src_byte >>= (8 - dst_bit_off);
+ dst_bit_off = 0;
+ dst++;
+ } else if (nbytes) {
+ src_byte |= src[0] << (8 - src_bit_off);
+ dst[0] &= GENMASK(dst_bit_off - 1, 0);
+ dst[0] |= src_byte << dst_bit_off;
+ src_bit_off += dst_bit_off;
+ src_byte >>= (8 - dst_bit_off);
+ dst_bit_off = 0;
+ dst++;
+ nbytes--;
+ src++;
+ if (src_bit_off > 7) {
+ src_bit_off -= 8;
+ dst[0] = src_byte;
+ dst++;
+ src_byte >>= 8;
+ }
+ }
+ }
+
+ if (!src_bit_off && !dst_bit_off) {
+ if (nbytes)
+ memcpy(dst, src, nbytes);
+ } else {
+ for (i = 0; i < nbytes; i++) {
+ src_byte |= src[i] << (8 - src_bit_off);
+ dst[i] = src_byte;
+ src_byte >>= 8;
+ }
+ }
+
+ dst += nbytes;
+ src += nbytes;
+ nbits %= 8;
+
+ if (!nbits && !src_bit_off)
+ return;
+
+ if (nbits)
+ src_byte |= (*src & GENMASK(nbits - 1, 0)) <<
+ ((8 - src_bit_off) % 8);
+ nbits += (8 - src_bit_off) % 8;
+
+ if (dst_bit_off)
+ src_byte = (src_byte << dst_bit_off) |
+ (*dst & GENMASK(dst_bit_off - 1, 0));
+ nbits += dst_bit_off;
+
+ if (nbits % 8)
+ src_byte |= (dst[nbits / 8] & GENMASK(7, nbits % 8)) <<
+ (nbits / 8);
+
+ nbytes = DIV_ROUND_UP(nbits, 8);
+ for (i = 0; i < nbytes; i++) {
+ dst[i] = src_byte;
+ src_byte >>= 8;
+ }
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 32c6ba4..17d0736 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -290,6 +290,10 @@ extern int gpmi_send_page(struct gpmi_nand_data *,
extern int gpmi_read_page(struct gpmi_nand_data *,
dma_addr_t payload, dma_addr_t auxiliary);
+void gpmi_move_bits(u8 *dst, size_t dst_bit_off,
+ const u8 *src, size_t src_bit_off,
+ size_t nbits);
+
/* BCH : Status Block Completion Codes */
#define STATUS_GOOD 0x00
#define STATUS_ERASED 0xff
--
1.9.1
More information about the linux-mtd
mailing list