[PATCH v3 1/2] mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDs

[Brian Norris]

> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index b7c1199..b0b74cc 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -587,6 +587,11 @@ struct nand_buffers {
>   * @ecc_step_ds:	[INTERN] ECC step required by the @ecc_strength_ds,
>   *                      also from the datasheet. It is the recommended ECC step
>   *			size, if known; if unknown, set to zero.
> + * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
> + *			      either deduced from the datasheet if the NAND
> + *			      chip is not ONFI compliant or set to 0 if it is
> + *			      (an ONFI chip is always configured in mode 0
> + *			      after a NAND reset)

This is probably OK only if every NAND chip is at least as fast as ONFI
mode 0. For older / legacy flash, I'm not sure if that's 100% true.
Maybe we'll need an UNKNOWN value, for those whose timing information is
not known?

Anyway, I think this is OK for now. Pushed the series to l2-mtd.git.
Thanks!

>   * @numchips:		[INTERN] number of physical chips
>   * @chipsize:		[INTERN] the size of one chip for multichip arrays
>   * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1

Brian