[PATCH v2 2/2] mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table

Boris BREZILLON boris.brezillon at free-electrons.com
Mon Sep 22 07:25:11 PDT 2014


Add the full description of the Hynix H27UCG8T2ATR-BC NAND chip in the
nand_ids table so that we can later use the NAND ECC infos and ONFI timings
mode in controller drivers.

Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
---
 drivers/mtd/nand/nand_ids.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 3d7c89f..fbde8910 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -46,6 +46,10 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"SDTNRGAMA 64G 3.3V 8-bit",
 		{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
 		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+	{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
+		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+		  SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
+		  4 },
 
 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
-- 
1.9.1




More information about the linux-mtd mailing list