[PATCH 3/3] mtd: nand: Force omap_elm to be built as a module if omap2_nand is a module

[Ezequiel Garcia]

On 12 Sep 12:01 PM, Roger Quadros wrote:
> On 09/11/2014 04:47 PM, Ezequiel Garcia wrote:
> > This commit adds a hidden option to build the omap_elm as a module, if
> > omap2_nand is a module (and similarly in the built-in case).
> > 
> > This fixes the following build error when omap2_nand is chosen built-in,
> > and omap_elm is chosen as a module:
> > 
> > drivers/built-in.o: In function `omap_nand_probe':
> > /work/linux-2.6/drivers/mtd/nand/omap2.c:2010: undefined reference to `elm_config'
> > /work/linux-2.6/drivers/mtd/nand/omap2.c:1980: undefined reference to `elm_config'
> > /work/linux-2.6/drivers/mtd/nand/omap2.c:1927: undefined reference to `elm_config'
> > drivers/built-in.o: In function `omap_elm_correct_data':
> > /work/linux-2.6/drivers/mtd/nand/omap2.c:1444: undefined reference to `elm_decode_bch_error_page'
> > 
> > Signed-off-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
> > ---
> >  drivers/mtd/nand/Kconfig  | 8 +++++++-
> >  drivers/mtd/nand/Makefile | 2 +-
> >  2 files changed, 8 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> > index f1cf503..12e8ee8 100644
> > --- a/drivers/mtd/nand/Kconfig
> > +++ b/drivers/mtd/nand/Kconfig
> > @@ -96,7 +96,7 @@ config MTD_NAND_OMAP2
> >  
> >  config MTD_NAND_OMAP_BCH
> >  	depends on MTD_NAND_OMAP2
> > -	tristate "Support hardware based BCH error correction"
> > +	bool "Support hardware based BCH error correction"
> >  	default n
> >  	select BCH
> >  	help
> > @@ -106,6 +106,12 @@ config MTD_NAND_OMAP_BCH
> >  	  legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine
> >  	  so they should not enable this config symbol.
> >  
> > +config MTD_NAND_OMAP_BCH_BUILD
> > +	tristate
> > +	depends on MTD_NAND_OMAP2
> > +	default m if MTD_NAND_OMAP2=m && MTD_NAND_OMAP_BCH
> > +	default y if MTD_NAND_OMAP2=y && MTD_NAND_OMAP_BCH
> > +
> >  config MTD_NAND_IDS
> >  	tristate
> >  
> > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> > index 4bcdeb0..3580188 100644
> > --- a/drivers/mtd/nand/Makefile
> > +++ b/drivers/mtd/nand/Makefile
> > @@ -27,7 +27,7 @@ obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
> >  obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
> >  obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
> >  obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
> > -obj-$(CONFIG_MTD_NAND_OMAP_BCH)		+= omap_elm.o
> > +obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
> >  obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
> >  obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
> >  obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
> > 
> 
> The overall logic seems to work but I still see the following issue.
> 
> In menuconfig, the OMAP_BCH option is still visible as a boolean even though
> the ELM module finally gets built as a module.
> This can be confusing to the user and I'd avoid that behaviour.
> 

Yes, I know. But it's either this solution or no solution at all, I think.

Let me give some further context about this patch, so we can have more
information to decide.

First of all (and IMO) the user doesn't have to know about the ELM being
a module or not, because modprobe will load it (since omap2_nand depends
on omap_elm's symbols).

So, the new way seems a bit more intuitive for me. The user choses if he
wants to have hardware BCH support, and such support gets built the right
way.

If we still consider this highly confusing, and we want to avoid it,
then it seems we can only make omap_elm a boolean, which means it'll always
be built-in. I crafted this patch in an effort to avoid making it boolean.

Finally, the solution is taken from media/usb/stk1160. For good or for bad,
we have a precedent in doing things this way.

Ultimately, I don't care much as I don't think anyone will build it as a module,
except maybe for testing the driver under probe/remove cycles.
-- 
Ezequiel Garcia, VanguardiaSur
www.vanguardiasur.com.ar