[PATCH] mtd: nand: gpmi: add proper raw access support

Huang Shijie shijie.huang at intel.com
Thu Sep 11 17:40:47 PDT 2014


On Thu, Sep 11, 2014 at 04:45:36PM +0200, Boris BREZILLON wrote:
> On Thu, 11 Sep 2014 22:29:32 +0800
> Huang Shijie <shijie8 at gmail.com> wrote:
> 
> > On Wed, Sep 10, 2014 at 10:55:39AM +0200, Boris BREZILLON wrote:
> >  +static int gpmi_ecc_read_page_raw(struct mtd_info *mtd,
> > > +				  struct nand_chip *chip, uint8_t *buf,
> > > +				  int oob_required, int page)
> > > +{
> > > +	struct gpmi_nand_data *this = chip->priv;
> > > +	struct bch_geometry *nfc_geo = &this->bch_geometry;
> > > +	int eccsize = nfc_geo->ecc_chunk_size;
> > > +	int eccbytes = DIV_ROUND_UP(nfc_geo->ecc_strength * nfc_geo->gf_len,
> > > +				    8);
> > 
> > In actually, the ECC can be _NOT_ bytes aligned.
> > you should not round up to byte.
> 
> You mean, on the NAND storage ? That would be weird, but I'll check.

yes. it is weird. 

thanks
Huang Shijie



More information about the linux-mtd mailing list