[PATCH] mtd: nand: gpmi: add proper raw access support

[Huang Shijie]

Hi Boris,

On Thu, Sep 11, 2014 at 02:36:16PM +0200, Boris BREZILLON wrote:
> Hi Huang,
> 
> On Thu, 11 Sep 2014 20:09:30 +0800
> Huang Shijie <shijie8 at gmail.com> wrote:
> 
> > On Wed, Sep 10, 2014 at 10:55:39AM +0200, Boris BREZILLON wrote:
> > > Several MTD users (either in user or kernel space) expect a valid raw
> > > access support to NAND chip devices.
> > > This is particularly true for testing tools which are often touching the
> > > data stored in a NAND chip in raw mode to artificially generate errors.
> > > 
> > > The GPMI drivers do not implemenent raw access functions, and thus rely on
> > > default HW_ECC scheme implementation.
> > > The default implementation consider the data and OOB area as properly
> > > separated in their respective NAND section, which is not true for the GPMI
> > > controller.
> > > In this driver/controller some OOB data are stored at the beginning of the
> > > NAND data area (these data are called metadata in the driver), then ECC
> > > bytes are interleaved with data chunk (which is similar to the
> > > HW_ECC_SYNDROME scheme), and eventually the remaining bytes are used as
> > > OOB data.
> > > 
> > > Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> > > ---
> > > Hello,
> > > 
> > > This patch is providing raw access support to the GPMI driver which is
> > > particularly useful to run some tests on the NAND (the one coming in
> > > mind is the mtd_nandbiterrs testsuite).
> > > 
> > > I know this rework might break several user space tools which are relying
> > > on the default raw access implementation (I already experienced an issue
> > > with the kobs-ng tool provided by freescale), but many other tools will
> > > now work as expected.
> > If the kobs-ng can not works, there is no meaning that other tools
> > works.  So I do not think we need to implement these hooks.
> 
> Well, I don't know about freescale specific tools, but at least I have
> an example with mtd_nandbiterrs module.

The gpmi uses the hardware ECC for the bitflips.
I really do not know why the mtd_nandbiterrs is needed.
IMHO, the mtd_nandbiterrs is useless for the gpmi.

> This module is assuming it can write only the data part of a NAND page
> without modifying the OOB area (see [1]), which in GPMI controller case
> is impossible because raw write function store the data as if there
> were no specific scheme, while there is one:
> (metadata + n x (data_chunk + ECC bytes) + remaining_bytes).
> 
> Moreover, IMHO, nanddump and nandwrite tools (which can use raw
> access mode when passing the appropriate option) should always return
> the same kind of data no matter what NAND controller is in use on the
> system => (DATA + OOB_DATA), and this is definitely not the case with
> the GPMI driver.
> 
> See how raw access on HW_ECC_SYNDROME scheme is implemented in
The gpmi uses the NAND_ECC_HW, not the NAND_ECC_HW_SYNDROME.
Even you really want to support the nanddump, i do not agree to add the
write hook, it may crash the system.

thanks
Huang Shijie