[PATCH 0/2] ARM: mvebu: Use Hardware BCH ECC for RN104 and RN2120

[Jason Cooper]

On Sat, Sep 06, 2014 at 10:48:44PM +0200, Arnaud Ebalard wrote:
> Hi,
> 
> Following Ben's report and fix for RN102, I did some tests
> on RN104 and RN2120 (they have the same Hynix H27U1G8F2BTR
> flash and setup) and came up w/ the exact same fixes for
> their respective .dts files. With those patches, it is now
> possible to update kernel from userland and u-boot will
> happily load and boot it on those devices.
> 
> Both patches should be candidates for stable, I guess.
> 
> Cheers,
> 
> a+
> 
> Arnaud Ebalard (2):
>   ARM: mvebu: Netgear RN104: Use Hardware BCH ECC
>   ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
> 
>  arch/arm/boot/dts/armada-370-netgear-rn104.dts | 4 ++++
>  arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 4 ++++
>  2 files changed, 8 insertions(+)

I've applied both patches to mvebu/fixes and flagged them for stable,
v3.14+.  I removed the 'Depends' line from each, as Thomas mentioned,
there is no build dependency between these dts changes and the code
supporting it (as it should be).

thx,

Jason.