[PATCH 7/7] docg3: Fix miuse of seq_printf return value
Brian Norris
computersforpeace at gmail.com
Wed Oct 22 01:29:16 PDT 2014
On Mon, Sep 29, 2014 at 04:08:27PM -0700, Joe Perches wrote:
> seq_printf doesn't return a useful value, so remove
> these misuses.
Good catch. So it looks like this driver always had some form of
wrongness (returning a character count) in its debugfs callbacks, but
nobody noticed.
Applied to l2-mtd.git. Thanks!
Brian
> Signed-off-by: Joe Perches <joe at perches.com>
> ---
> drivers/mtd/devices/docg3.c | 112 ++++++++++++++++++++------------------------
> 1 file changed, 52 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
> index 21cc4b6..68ff83c 100644
> --- a/drivers/mtd/devices/docg3.c
> +++ b/drivers/mtd/devices/docg3.c
> @@ -1655,22 +1655,21 @@ static int dbg_flashctrl_show(struct seq_file *s, void *p)
> {
> struct docg3 *docg3 = (struct docg3 *)s->private;
>
> - int pos = 0;
> u8 fctrl;
>
> mutex_lock(&docg3->cascade->lock);
> fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
> mutex_unlock(&docg3->cascade->lock);
>
> - pos += seq_printf(s,
> - "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
> - fctrl,
> - fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
> - fctrl & DOC_CTRL_CE ? "active" : "inactive",
> - fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
> - fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
> - fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
> - return pos;
> + seq_printf(s, "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n",
> + fctrl,
> + fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-",
> + fctrl & DOC_CTRL_CE ? "active" : "inactive",
> + fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-",
> + fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-",
> + fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready");
> +
> + return 0;
> }
> DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show);
>
> @@ -1678,58 +1677,56 @@ static int dbg_asicmode_show(struct seq_file *s, void *p)
> {
> struct docg3 *docg3 = (struct docg3 *)s->private;
>
> - int pos = 0, pctrl, mode;
> + int pctrl, mode;
>
> mutex_lock(&docg3->cascade->lock);
> pctrl = doc_register_readb(docg3, DOC_ASICMODE);
> mode = pctrl & 0x03;
> mutex_unlock(&docg3->cascade->lock);
>
> - pos += seq_printf(s,
> - "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
> - pctrl,
> - pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
> - pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
> - pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
> - pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
> - pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
> - mode >> 1, mode & 0x1);
> + seq_printf(s,
> + "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (",
> + pctrl,
> + pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0,
> + pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0,
> + pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0,
> + pctrl & DOC_ASICMODE_MDWREN ? 1 : 0,
> + pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0,
> + mode >> 1, mode & 0x1);
>
> switch (mode) {
> case DOC_ASICMODE_RESET:
> - pos += seq_puts(s, "reset");
> + seq_puts(s, "reset");
> break;
> case DOC_ASICMODE_NORMAL:
> - pos += seq_puts(s, "normal");
> + seq_puts(s, "normal");
> break;
> case DOC_ASICMODE_POWERDOWN:
> - pos += seq_puts(s, "powerdown");
> + seq_puts(s, "powerdown");
> break;
> }
> - pos += seq_puts(s, ")\n");
> - return pos;
> + seq_puts(s, ")\n");
> + return 0;
> }
> DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
>
> static int dbg_device_id_show(struct seq_file *s, void *p)
> {
> struct docg3 *docg3 = (struct docg3 *)s->private;
> - int pos = 0;
> int id;
>
> mutex_lock(&docg3->cascade->lock);
> id = doc_register_readb(docg3, DOC_DEVICESELECT);
> mutex_unlock(&docg3->cascade->lock);
>
> - pos += seq_printf(s, "DeviceId = %d\n", id);
> - return pos;
> + seq_printf(s, "DeviceId = %d\n", id);
> + return 0;
> }
> DEBUGFS_RO_ATTR(device_id, dbg_device_id_show);
>
> static int dbg_protection_show(struct seq_file *s, void *p)
> {
> struct docg3 *docg3 = (struct docg3 *)s->private;
> - int pos = 0;
> int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
>
> mutex_lock(&docg3->cascade->lock);
> @@ -1742,45 +1739,40 @@ static int dbg_protection_show(struct seq_file *s, void *p)
> dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
> mutex_unlock(&docg3->cascade->lock);
>
> - pos += seq_printf(s, "Protection = 0x%02x (",
> - protect);
> + seq_printf(s, "Protection = 0x%02x (", protect);
> if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
> - pos += seq_puts(s, "FOUNDRY_OTP_LOCK,");
> + seq_puts(s, "FOUNDRY_OTP_LOCK,");
> if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
> - pos += seq_puts(s, "CUSTOMER_OTP_LOCK,");
> + seq_puts(s, "CUSTOMER_OTP_LOCK,");
> if (protect & DOC_PROTECT_LOCK_INPUT)
> - pos += seq_puts(s, "LOCK_INPUT,");
> + seq_puts(s, "LOCK_INPUT,");
> if (protect & DOC_PROTECT_STICKY_LOCK)
> - pos += seq_puts(s, "STICKY_LOCK,");
> + seq_puts(s, "STICKY_LOCK,");
> if (protect & DOC_PROTECT_PROTECTION_ENABLED)
> - pos += seq_puts(s, "PROTECTION ON,");
> + seq_puts(s, "PROTECTION ON,");
> if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
> - pos += seq_puts(s, "IPL_DOWNLOAD_LOCK,");
> + seq_puts(s, "IPL_DOWNLOAD_LOCK,");
> if (protect & DOC_PROTECT_PROTECTION_ERROR)
> - pos += seq_puts(s, "PROTECT_ERR,");
> + seq_puts(s, "PROTECT_ERR,");
> else
> - pos += seq_puts(s, "NO_PROTECT_ERR");
> - pos += seq_puts(s, ")\n");
> -
> - pos += seq_printf(s, "DPS0 = 0x%02x : "
> - "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
> - "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
> - dps0, dps0_low, dps0_high,
> - !!(dps0 & DOC_DPS_OTP_PROTECTED),
> - !!(dps0 & DOC_DPS_READ_PROTECTED),
> - !!(dps0 & DOC_DPS_WRITE_PROTECTED),
> - !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
> - !!(dps0 & DOC_DPS_KEY_OK));
> - pos += seq_printf(s, "DPS1 = 0x%02x : "
> - "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
> - "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
> - dps1, dps1_low, dps1_high,
> - !!(dps1 & DOC_DPS_OTP_PROTECTED),
> - !!(dps1 & DOC_DPS_READ_PROTECTED),
> - !!(dps1 & DOC_DPS_WRITE_PROTECTED),
> - !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
> - !!(dps1 & DOC_DPS_KEY_OK));
> - return pos;
> + seq_puts(s, "NO_PROTECT_ERR");
> + seq_puts(s, ")\n");
> +
> + seq_printf(s, "DPS0 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
> + dps0, dps0_low, dps0_high,
> + !!(dps0 & DOC_DPS_OTP_PROTECTED),
> + !!(dps0 & DOC_DPS_READ_PROTECTED),
> + !!(dps0 & DOC_DPS_WRITE_PROTECTED),
> + !!(dps0 & DOC_DPS_HW_LOCK_ENABLED),
> + !!(dps0 & DOC_DPS_KEY_OK));
> + seq_printf(s, "DPS1 = 0x%02x : Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n",
> + dps1, dps1_low, dps1_high,
> + !!(dps1 & DOC_DPS_OTP_PROTECTED),
> + !!(dps1 & DOC_DPS_READ_PROTECTED),
> + !!(dps1 & DOC_DPS_WRITE_PROTECTED),
> + !!(dps1 & DOC_DPS_HW_LOCK_ENABLED),
> + !!(dps1 & DOC_DPS_KEY_OK));
> + return 0;
> }
> DEBUGFS_RO_ATTR(protection, dbg_protection_show);
>
More information about the linux-mtd
mailing list