UBI: Question about error checking in ubi_eba_write_leb()

[steve]

Thank you very much for your reply Artem, that makes sense to me now.

On Fri, 3 Oct 2014, Artem Bityutskiy wrote:

> On Tue, 2014-09-30 at 12:00 +0100, steve wrote:
>> This is my first post to this mailing list, I think this is the right place for
>>   my question.
>>
>> I think the error checking in ubi_eba_write_leb() may be wrong and may cause
>> incorrect behaviour when extra checking is enabled in debugfs, here's the
>> scenario I have a problem with:
>>
>> ubi_eba_write_leb() calls  ubi_io_write_data() -> ubi_io_write() ->
>> ubi_dbg_check_all_ff()
>>
>> ubi_dbg_check_all_ff() will perform an mtd_read() which can fail with EBADMSG
>> (if there is a failure to correct using ECC as in my case).
>
> Yep, this is possible.
>
>>  This error code
>> will bubble back up to ubi_eba_write_leb()
>
> And the question is - is this the right thing to do? Original intention
> was to catch I/O problems and report about them promptly by dumping the
> information to the log and returning an error.
>
> The error we return is -EINVAL exactly in because we did not want the
> upper layers try to 'deal' with the problem. All we wanted to do is to
> catch the problems.
>
>> , but recover_peb() will only be
>> called if the error code was EIO.
>
> Yeah, and we never meant the recover_peb() to actually try doing
> anything about that.
>
>>  The question is should recover_peb() be
>> called in this case as well?
>
> Good question - this was not meant to be.
>
> So see, you are now talking about the debugging code. It was written
> basically to make developers' live simpler. This is just a tool to catch
> bugs during the R&D.
>
> So if during the R&D phase we see that the driver returns an "ECC
> error" (-EBADMSG) when we read the data we just wrote - this is a
> problem, and we _do not_ want to hide it by starting the recovery
> mechanism - we want the write request to actually fail and the developer
> to actually notice this.
>
> The non-debug case is a completely different thing. Here we actually
> would be interested to handle the issue transparently - move the data to
> a different PEB, and mark the failing PEB as bad.
>
> But the assumption is that the write() path never returns -EBADMSG. If a
> driver internally does write-read-verify, we assume it should return
> -EIO if there is an ECC error. But not -EBADMSG.
>
> This is why we do not handle this error code in eba.c.
>
> Now, what I see is that you are looking at some old code. In the new
> code the function is named 'ubi_self_check_all_ff()', and if I read the
> code correctly, it will return -EINVAL if mtd_read() returns -EBADMSG:
>
>
>        err = mtd_read(ubi->mtd, addr, len, &read, buf);
>        if (err && !mtd_is_bitflip(err)) {
>                ubi_err("error %d while reading %d bytes from PEB %d:%d, read %zd bytes",
>                        err, len, pnum, offset, read);
>                goto error;
>
>