[PATCH 2/2] mtd: nand: omap: Synchronize access to the ECC engine

Rostislav Lisovy lisovy at gmail.com
Wed Oct 1 07:59:14 PDT 2014


The AM335x Technical Reference Manual (spruh73j.pdf) says
"Because the ECC engine includes only one accumulation context,
it can be allocated to only one chip-select at a time ... "
(7.1.3.3.12.3). Since the commit 97a288ba2cfa ("ARM: omap2+:
gpmc-nand: Use dynamic platform_device_alloc()") gpmc-nand
driver supports multiple NAND flash devices connected to
the single controller. Use spinlocks to restrict access
to the ECC engine for single read/write operation at a time.

Tested with custom AM335x board using 2x NAND flash chips.

Signed-off-by: Rostislav Lisovy <lisovy at merica.cz>
---
 drivers/mtd/nand/omap2.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 24d5c6a..8761a5b 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
 
 #include <linux/mtd/nand_bch.h>
 #include <linux/platform_data/elm.h>
@@ -146,6 +147,7 @@ static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
 static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
 #endif
 
+static DEFINE_SPINLOCK(omap_eccengine_lock);
 
 struct omap_nand_info {
 	struct nand_hw_control		controller;
@@ -1518,6 +1520,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
+	spin_lock(&omap_eccengine_lock);
 	/* Enable GPMC ecc engine */
 	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
 
@@ -1526,6 +1529,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 
 	/* Update ecc vector from GPMC result registers */
 	chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+	spin_unlock(&omap_eccengine_lock);
 
 	for (i = 0; i < chip->ecc.total; i++)
 		chip->oob_poi[eccpos[i]] = ecc_calc[i];
@@ -1561,6 +1565,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	int stat;
 	unsigned int max_bitflips = 0;
 
+	spin_lock(&omap_eccengine_lock);
 	/* Enable GPMC ecc engine */
 	chip->ecc.hwctl(mtd, NAND_ECC_READ);
 
@@ -1573,6 +1578,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 
 	/* Calculate ecc bytes */
 	chip->ecc.calculate(mtd, buf, ecc_calc);
+	spin_unlock(&omap_eccengine_lock);
 
 	memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total);
 
-- 
1.9.1




More information about the linux-mtd mailing list