[PATCH 1/1 v3] driver:mtd:spi-nor: Add Micron quad I/O support

[Marek Vasut]

On Wednesday, October 01, 2014 at 04:28:17 PM, bpqw wrote:
> This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes.
> 
> For Micron SPI NOR flash, enabling or disabling quad I/O protocol is
> controlled by EVCR (Enhanced Volatile Configuration Register), Quad I/O
> protocol bit 7. When EVCR bit 7 is reset to 0, the SPI NOR flash will
> operate in quad I/O mode.
> 
> Signed-off-by: bean huo <beanhuo at micron.com>

I don't see anything obviously wrong.

Acked-by: Marek Vasut <marex at denx.de>

Best regards,
Marek Vasut