[PATCH 1/1][v2] IFC: Change IO accessor based on endianness

Scott Wood scottwood at freescale.com
Wed Nov 12 22:18:03 PST 2014


On Tue, 2014-11-11 at 23:07 -0800, Brian Norris wrote:
> On Mon, Nov 03, 2014 at 05:22:46PM -0600, Scott Wood wrote:
> > On Mon, 2014-10-20 at 11:41 +0530, Jaiprakash Singh wrote:
> > > From: Jaiprakash Singh <b44839 at freescale.com>
> > > 
> > > IFC registers can be of type Little Endian
> > > or big Endian depending upon Freescale SoC.
> > > Here SoC defines the register type of
> > > IFC IP.So update accessors functions with
> > > common IFC accessors functions to take
> > > care both type of endianness.
> > > 
> > > IFC IO accressor are set at run time based
> > > on IFC IP registers endianness.IFC node in
> > > DTS file contains information about
> > > endianness.
> > > 
> > > Signed-off-by: Jaiprakash Singh <b44839 at freescale.com>
> > > ---
> > > Changes for v2
> > > 	- Moved IFC accessor function to fsl_ifc.h
> > > 	from fsl_ifc.c and make them inline static
> > > 
> > > .../bindings/memory-controllers/fsl/ifc.txt        |    2 +
> > >  drivers/memory/fsl_ifc.c                           |   72 ++++++----
> > >  drivers/mtd/nand/fsl_ifc_nand.c                    |  151 +++++++++++---------
> > >  include/linux/fsl_ifc.h                            |   42 ++++++
> > >  4 files changed, 167 insertions(+), 100 deletions(-)
> > 
> > Given that this spans MTD and non-MTD files, whose tree should this go
> > through?
> 
> I already have one patch that touches these same files:
> 
>   http://git.infradead.org/l2-mtd.git/commitdiff/096916610f415e07cfe71d71a391011c617be5ed
> 
> I don't actually see a MAINTAINERS entry for most of drivers/memory/, so
> I didn't think that was a problem. If the (fixed) full patch can be
> based on l2-mtd.git and submitted with linux-mtd at infradead.org in CC, I
> can consider taking it, pending proper review.

OK.

-Scott





More information about the linux-mtd mailing list