[PATCH V6] UBI: Extend UBI layer debug/messaging capabilities

[Richard Weinberger]

Am 10.11.2014 um 18:37 schrieb Richard Weinberger:
> Am 03.11.2014 um 14:58 schrieb Tanya Brokhman:
>> If there is more then one UBI device mounted, there is no way to
>> distinguish between messages from different UBI devices.
>> Add device number to all ubi layer message types.
>>
>> The R/O block driver messages were replaced by pr_* since
>> ubi_device structure is not used by it.
>>
>> Amended a bit by Artem.
>>
>> Signed-off-by: Tanya Brokhman <tlinder at codeaurora.org>
>> Signed-off-by: Artem Bityutskiy <artem.bityutskiy at linux.intel.com>
> 
> I've rebased my fastmap work to linux-ubifs.git which contains this patch.
> While testing I noticed that the log output looks quite different.
> 
> e.g.
> [   26.564111] UBI-0: ubi_attach_mtd_dev:default fastmap pool size: 256
> [   26.565438] UBI-0: ubi_attach_mtd_dev:default fastmap WL pool size: 128
> [   26.566781] UBI-0: ubi_attach_mtd_dev:attaching mtd0 to ubi0
> [   26.653704] UBI-0: scan_all:scanning is finished
> [   26.654379] UBI-0: late_analysis:empty MTD device detected
> [   26.761154] UBI-0: ubi_attach_mtd_dev:attached mtd0 (name "NAND simulator partition 0", size 128 MiB)
> [   26.762112] UBI-0: ubi_attach_mtd_dev:PEB size: 16384 bytes (16 KiB), LEB size: 15872 bytes
> [   26.762933] UBI-0: ubi_attach_mtd_dev:min./max. I/O unit sizes: 512/512, sub-page size 256
> [   26.763765] UBI-0: ubi_attach_mtd_dev:VID header offset: 256 (aligned 256), data offset: 512
> [   26.764607] UBI-0: ubi_attach_mtd_dev:good PEBs: 8192, bad PEBs: 0, corrupted PEBs: 0
> [   26.765394] UBI-0: ubi_attach_mtd_dev:user volume: 0, internal volumes: 1, max. volumes count: 92
> [   26.766244] UBI-0: ubi_attach_mtd_dev:max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 3297366243
> [   26.767287] UBI-0: ubi_attach_mtd_dev:available PEBs: 8014, total reserved PEBs: 178, PEBs reserved for bad PEB handling: 160
> [   26.769050] UBI-0: ubi_thread:background thread "ubi_bgt0d" started, PID 2686
> [   29.119991] UBI-0: ubi_detach_mtd_dev:detaching mtd0
> [   29.121084] UBI-0: ubi_thread:background thread "ubi_bgt0d" should stop, PID 2686
> [   29.165538] UBI-0: ubi_detach_mtd_dev:mtd0 is detached
> 
> Do we really want the function name in every log message?
> IMHO this is not wise except for pure debug logs.

BTW: Why UBI-X? This looks odd. Either use UBIX or ubiX.

Thanks,
//richard