[PATCH V2] mtd: block2mtd: Present block2mtd timely on boot time

[Rodrigo Freire]

Hi Brian,

> From: "Brian Norris" <computersforpeace at gmail.com>
> Sent: Wednesday, November 5, 2014 6:23:03 PM

> On Wed, Sep 17, 2014 at 04:28:03PM -0400, Rodrigo Freire wrote:
> > Currently, a block MTD device is not presented to the system on time, in
> > order to start mounting the filesystems. This patch ensures that block2mtd
> > is presented at the right time, so filesystems can be mounted on boot time.
> > This issue was seen on BCM2835 (Raspberry Pi) systems when mounting JFFS2
> > block2mtd filesystems.

> This still seems like a bad idea (using a block device + block2mtd +
> JFFS2). Why are you doing this? See comments here:
> http://www.linux-mtd.infradead.org/faq/jffs2.html#L_hdd_jffs2

As Felix stated on a previous message to the thread, I am using JFFS2 over
block2mtd where regular filesystems failed to do so well. There are several
[1] threads pointing this issue, and JFFS2 over block2mtd works like a charm
on more harsh scenarios. The block2mtd behavior was not working correctly on
BCM2835 architecture (the kernel waited for the block device prior to its
actual enumeration by the kernel) and this patch ensures that block2mtd
kicks in _after_ the block devices was enumerated or after a user-defined
timeout. 
The patchset also enables block2mtd to define a MTD name (a MTD supports it
natively, the block2mtd had its name hard-coded to its block device name).

> You're stating right up front that this patch is doing several different
> things. Please split these up into separate commits which get their own
> description.

Done. I'll send a new split V3 patchset.

> You have several checkpatch warnings. Please fix them.

Thanks for pointing. Done.

> The addition of this name parameter should definitely be its own patch.

I agree. Done.

> This variable produces a warning when built as a module:

> drivers/mtd/devices/block2mtd.c: In function ‘add_device’:
> drivers/mtd/devices/block2mtd.c:228:6: warning: unused variable ‘i’
> [-Wunused-variable]
> int i;
> ^

Oooops. Fixed.

> > +#ifndef MODULE
> > +/*
> > +* We might not have the root device mounted at this point.
> > +* Try to resolve the device name by other means.
> > +*/

> These lines should start with a space, so the asterisks line up.

Fixed, and also fixed other non-aligned asterisks as well.

> > - dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
> > + dev->mtd.size = dev->blkdev->bd_inode->i_size & ~(erase_size - 1);

> This deserves its own patch, or at least some explanation of why you're
> doing this. I guess you're seeing cases where the provided erasesize is
> not aligned with the size of the block device?

Jörg pointed it on https://lkml.org/lkml/2014/9/9/680. Now, we just keep
it aligned with erase_size. Separated on a 3rd patch.

> > dev->mtd.erasesize = erase_size;
> > dev->mtd.writesize = 1;
> > dev->mtd.writebufsize = PAGE_SIZE;
> > @@ -276,15 +301,19 @@ static struct block2mtd_dev *add_device(
> > dev->mtd.priv = dev;
> > dev->mtd.owner = THIS_MODULE;
> >
> > - if (mtd_device_register(&dev->mtd, NULL, 0)) {
> > + part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
> > + part->name = name;
> > + part->offset = 0;
> > + part->size = dev->mtd.size;

> Why are you doing this? This also does not fit the description of this
> patch. And what's wrong with using the default partitioning options?
> Won't we (if not specified in some other way) default to an
> unpartitioned MTD, which covers the entire device?

This code was changed in order to support a MTD name.

Thanks for your dilligent review.

Best regards,

- RF.

[1] - http://bit.ly/1smGvwa