[PATCH v4 1/4] mtd: nand: provide detailed description for raw read/write page methods

[Brian Norris]

On Sat, Oct 25, 2014 at 11:55:27AM +0800, Huang Shijie wrote:
> On Mon, Oct 20, 2014 at 10:46:14AM +0200, Boris Brezillon wrote:
> > read_page_raw and write_page_raw method description is not clear enough.
> > It clearly specifies that ECC correction should not be involved but does
> > not talk about specific layout (by layout I mean where in-band and
> > out-of-band data are stored on the NAND media) used by NAND/ECC
> > controllers.
> > 
> > Those specific layouts might impact MTD users and thus should be hidden (as
> > already done in the standard NAND_ECC_HW_SYNDROME implementation).
> > 
> > Clearly state this constraint in the nand_ecc_ctrl struct documentation.
> > 
> > Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> > ---
> >  include/linux/mtd/nand.h | 17 +++++++++++++++--
> >  1 file changed, 15 insertions(+), 2 deletions(-)
> > 
> > diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> > index e4d451e..b14d190 100644
> > --- a/include/linux/mtd/nand.h
> > +++ b/include/linux/mtd/nand.h
> > @@ -455,8 +455,21 @@ struct nand_hw_control {
> >   *		be provided if an hardware ECC is available
> >   * @calculate:	function for ECC calculation or readback from ECC hardware
> >   * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
> > - * @read_page_raw:	function to read a raw page without ECC
> > - * @write_page_raw:	function to write a raw page without ECC
> > + * @read_page_raw:	function to read a raw page without ECC. This function
> > + *			should hide the specific layout used by the ECC
> > + *			controller and always return contiguous in-band and
> > + *			out-of-band data even if they're not stored
> > + *			contiguously on the NAND chip (e.g.
> > + *			NAND_ECC_HW_SYNDROME interleaves in-band and
> > + *			out-of-band data).
> > + * @write_page_raw:	function to write a raw page without ECC. This function
> > + *			should hide the specific layout used by the ECC
> > + *			controller and consider the passed data as contiguous
> > + *			in-band and out-of-band data. ECC controller is
> > + *			responsible for doing the appropriate transformations
> > + *			to adapt to its specific layout (e.g.
> > + *			NAND_ECC_HW_SYNDROME interleaves in-band and
> > + *			out-of-band data).
> >   * @read_page:	function to read a page according to the ECC generator
> >   *		requirements; returns maximum number of bitflips corrected in
> >   *		any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
> > -- 
> > 1.9.1
> > 
> thanks for this patch. 
> 
> hi Brian, what's your opinion about this patch?

I like the concept. It might be more succinctly described along the
lines of "the same layout as the non-raw versions (i.e., .read_page /
.write_page)". But the extra words may help for being more explicit.

I haven't taken a closer look at the other patches yet.

Brian