[PATCH v2] mtd: spi-nor: factor out write_enable() for erase commands
Brian Norris
computersforpeace at gmail.com
Wed Nov 5 02:29:03 PST 2014
write_enable() was being duplicated to both m25p80.c and fsl-quadspi.c.
But this should be handled within the spi-nor abstraction layer.
At the same time, let's add write_disable() after erasing, so we don't
leave the flash in a write-enabled state afterward.
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
drivers/mtd/devices/m25p80.c | 6 ------
drivers/mtd/spi-nor/fsl-quadspi.c | 5 -----
drivers/mtd/spi-nor/spi-nor.c | 9 ++++++---
3 files changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 35e7e9896b17..3bd12bbb94eb 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -157,16 +157,10 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
static int m25p80_erase(struct spi_nor *nor, loff_t offset)
{
struct m25p *flash = nor->priv;
- int ret;
dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
flash->mtd.erasesize / 1024, (u32)offset);
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
/* Set up command buffer. */
flash->command[0] = nor->erase_opcode;
m25p_addr2cmd(nor, offset, flash->command);
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 03dcffac8185..7f2ba8d946b5 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -738,11 +738,6 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index bfb67f1e2b7d..5e3a1d363895 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -228,9 +228,6 @@ static int erase_chip(struct spi_nor *nor)
{
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Send write enable, then erase commands. */
- write_enable(nor);
-
return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
}
@@ -285,6 +282,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
/* whole-chip erase? */
if (len == mtd->size) {
+ write_enable(nor);
+
if (erase_chip(nor)) {
ret = -EIO;
goto erase_err;
@@ -302,6 +301,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
/* "sector"-at-a-time erase */
} else {
while (len) {
+ write_enable(nor);
+
if (nor->erase(nor, addr)) {
ret = -EIO;
goto erase_err;
@@ -316,6 +317,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
}
}
+ write_disable(nor);
+
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
instr->state = MTD_ERASE_DONE;
--
1.9.1
More information about the linux-mtd
mailing list