[PATCH] ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards

Tony Lindgren tony at atomide.com
Wed May 14 08:30:29 PDT 2014


* Roger Quadros <rogerq at ti.com> [140514 05:36]:
> Commit c66d039197e4 broke NAND for non-DT boot on all OMAP2 and OMAP3
> boards using board_nand_init(). Following error is seen at boot
> 
> [    0.154998]  (null): Unsupported NAND ECC scheme selected
> 
> For OMAP2 and OMAP3 platforms, the ecc_opt parameter in platform data
> must be set to OMAP_ECC_HAM1_CODE_HW to work properly.
> 
> Tested on omap3-beagle c4.
> 
> Signed-off-by: Roger Quadros <rogerq at ti.com>

Thanks applying into fixes with Cc stable v3.12+.

Regards,

Tony

>  arch/arm/mach-omap2/board-flash.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
> index ac82512..b6885e4 100644
> --- a/arch/arm/mach-omap2/board-flash.c
> +++ b/arch/arm/mach-omap2/board-flash.c
> @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
>  	board_nand_data.nr_parts	= nr_parts;
>  	board_nand_data.devsize		= nand_type;
>  
> -	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
> +	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
>  	gpmc_nand_init(&board_nand_data, gpmc_t);
>  }
>  #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
> -- 
> 1.8.3.2
> 



More information about the linux-mtd mailing list