[PATCH 14/47] mtd: nand: stm_nand_bch: provide Device Tree support
Lee Jones
lee.jones at linaro.org
Thu May 1 02:56:21 PDT 2014
Fetch platform specific data from Device Tree. Any functions which
are useful to other STM NAND Controllers have been separated into a
separate file so they can be easily referenced by them as they
appear.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
drivers/mtd/nand/Kconfig | 7 ++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/stm_nand_bch.c | 56 +++++++++++++++
drivers/mtd/nand/stm_nand_dt.c | 149 ++++++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/stm_nand_dt.h | 39 +++++++++++
include/linux/mtd/stm_nand.h | 9 +++
6 files changed, 261 insertions(+)
create mode 100644 drivers/mtd/nand/stm_nand_dt.c
create mode 100644 drivers/mtd/nand/stm_nand_dt.h
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7b1352a..119aed5 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -517,4 +517,11 @@ config MTD_NAND_STM_BCH
help
Adds support for the STMicroelectronics NANDi BCH Controller.
+config MTD_NAND_STM_BCH_DT
+ tristate "STMicroelectronics: NANDi BCH Controller Device Tree support"
+ default MTD_NAND_STM_BCH if OF
+ help
+ Adds support for the STMicroelectronics NANDi BCH Controller's
+ Device Tree component.
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 94e7737..890f47f 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_STM_BCH) += stm_nand_bch.o
+obj-$(CONFIG_MTD_NAND_STM_BCH_DT) += stm_nand_dt.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 2670cec..b1de66e 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/device.h>
@@ -23,8 +24,10 @@
#include <linux/completion.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/stm_nand.h>
+#include <linux/mtd/partitions.h>
#include "stm_nand_regs.h"
+#include "stm_nand_dt.h"
/* Bad Block Table (BBT) */
struct nandi_bbt_info {
@@ -523,9 +526,42 @@ nandi_init_resources(struct platform_device *pdev)
return nandi;
}
+static void *stm_bch_dt_get_pdata(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct stm_plat_nand_bch_data *pdata;
+ int ecc_strength;
+ int ret;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ of_property_read_u32(np, "nand-ecc-strength", &ecc_strength);
+ if (ecc_strength == 0)
+ pdata->bch_ecc_cfg = BCH_NO_ECC;
+ else if (ecc_strength == 18)
+ pdata->bch_ecc_cfg = BCH_18BIT_ECC;
+ else if (ecc_strength == 30)
+ pdata->bch_ecc_cfg = BCH_30BIT_ECC;
+ else
+ pdata->bch_ecc_cfg = BCH_ECC_AUTO;
+
+ ret = stm_of_get_nand_banks(&pdev->dev, np, &pdata->bank);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ of_property_read_u32(np, "st,bch-bitflip-threshold",
+ &pdata->bch_bitflip_threshold);
+
+ return pdata;
+}
+
static int stm_nand_bch_probe(struct platform_device *pdev)
{
struct stm_plat_nand_bch_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
struct stm_nand_bank_data *bank;
struct nandi_bbt_info *bbt_info;
struct nandi_controller *nandi;
@@ -534,6 +570,19 @@ static int stm_nand_bch_probe(struct platform_device *pdev)
struct mtd_info *mtd;
int err;
+ if (!np) {
+ dev_err(&pdev->dev, "DT node found\n");
+ return -EINVAL;
+ }
+
+ pdata = stm_bch_dt_get_pdata(pdev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+
+ ppdata.of_node = stm_of_get_partitions_node(np, 0);
+
+ pdev->dev.platform_data = pdata;
+
nandi = nandi_init_resources(pdev);
if (IS_ERR(nandi)) {
dev_err(&pdev->dev, "failed to initialise NANDi resources\n");
@@ -613,12 +662,19 @@ static const struct dev_pm_ops stm_nand_bch_pm_ops = {
static const struct dev_pm_ops stm_nand_bch_pm_ops;
#endif
+static struct of_device_id nand_bch_match[] = {
+ { .compatible = "st,nand-bch", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, nand_bch_match);
+
static struct platform_driver stm_nand_bch_driver = {
.probe = stm_nand_bch_probe ,
.remove = stm_nand_bch_remove,
.driver = {
.name = "stm-nand-bch",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(nand_bch_match),
.pm = &stm_nand_bch_pm_ops,
},
};
diff --git a/drivers/mtd/nand/stm_nand_dt.c b/drivers/mtd/nand/stm_nand_dt.c
new file mode 100644
index 0000000..75ff131
--- /dev/null
+++ b/drivers/mtd/nand/stm_nand_dt.c
@@ -0,0 +1,149 @@
+/*
+ * drivers/mtd/nand/stm_nand_dt.c
+ *
+ * Support for NANDi BCH Controller Device Tree component
+ *
+ * Copyright (c) 2014 STMicroelectronics Limited
+ * Author: Author: Srinivas Kandagatla <srinivas.kandagatla at st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/byteorder/generic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/stm_nand.h>
+
+#include "stm_nand_regs.h"
+
+/**
+* stm_of_get_partitions_node - get partitions node from stm-nand type devices.
+*
+* @dev device pointer to use for devm allocations.
+* @np device node of the driver.
+* @bank_nr which bank number to use to get partitions.
+*
+* Returns a node pointer if found, with refcount incremented, use
+* of_node_put() on it when done.
+*
+*/
+struct device_node *stm_of_get_partitions_node(struct device_node *np,
+ int bank_nr)
+{
+ struct device_node *banksnp, *banknp, *partsnp = NULL;
+ char name[10];
+
+ banksnp = of_parse_phandle(np, "st,nand-banks", 0);
+ if (!banksnp)
+ return NULL;
+
+ sprintf(name, "bank%d", bank_nr);
+ banknp = of_get_child_by_name(banksnp, name);
+ if (banknp)
+ return NULL;
+
+ partsnp = of_get_child_by_name(banknp, "partitions");
+ of_node_put(banknp);
+
+ return partsnp;
+}
+EXPORT_SYMBOL(stm_of_get_partitions_node);
+
+/**
+ * stm_of_get_nand_banks - Get nand banks info from a given device node.
+ *
+ * @dev device pointer to use for devm allocations.
+ * @np device node of the driver.
+ * @banksptr double pointer to banks which is allocated
+ * and filled with bank data.
+ *
+ * Returns a count of banks found in the given device node.
+ *
+ */
+int stm_of_get_nand_banks(struct device *dev, struct device_node *np,
+ struct stm_nand_bank_data **banksptr)
+{
+ struct stm_nand_bank_data *banks;
+ struct device_node *banknp, *banksnp;
+ int nr_banks = 0;
+
+ if (!np)
+ return -ENODEV;
+
+ banksnp = of_parse_phandle(np, "st,nand-banks", 0);
+ if (!banksnp) {
+ dev_warn(dev, "No NAND banks specified in DT: %s\n",
+ np->full_name);
+ return -ENODEV;
+ }
+
+ for_each_child_of_node(banksnp, banknp)
+ nr_banks++;
+
+ *banksptr = devm_kzalloc(dev, sizeof(*banks) * nr_banks, GFP_KERNEL);
+ banks = *banksptr;
+ banknp = NULL;
+
+ for_each_child_of_node(banksnp, banknp) {
+ struct device_node *timingnp;
+ int bank = 0;
+
+ of_property_read_u32(banknp, "st,nand-csn", &banks[bank].csn);
+
+ if (of_get_nand_bus_width(banknp) == 16)
+ banks[bank].options |= NAND_BUSWIDTH_16;
+ if (of_get_nand_on_flash_bbt(banknp))
+ banks[bank].bbt_options |= NAND_BBT_USE_FLASH;
+
+ banks[bank].nr_partitions = 0;
+ banks[bank].partitions = NULL;
+
+ timingnp = of_parse_phandle(banknp, "st,nand-timing-spec", 0);
+ if (timingnp) {
+ struct nand_timing_spec *ts;
+
+ ts = devm_kzalloc(dev,
+ sizeof(struct nand_timing_spec),
+ GFP_KERNEL);
+
+ of_property_read_u32(timingnp, "tR", &ts->tR);
+ of_property_read_u32(timingnp, "tCLS", &ts->tCLS);
+ of_property_read_u32(timingnp, "tCS", &ts->tCS);
+ of_property_read_u32(timingnp, "tALS", &ts->tALS);
+ of_property_read_u32(timingnp, "tDS", &ts->tDS);
+ of_property_read_u32(timingnp, "tWP", &ts->tWP);
+ of_property_read_u32(timingnp, "tCLH", &ts->tCLH);
+ of_property_read_u32(timingnp, "tCH", &ts->tCH);
+ of_property_read_u32(timingnp, "tALH", &ts->tALH);
+ of_property_read_u32(timingnp, "tDH", &ts->tDH);
+ of_property_read_u32(timingnp, "tWB", &ts->tWB);
+ of_property_read_u32(timingnp, "tWH", &ts->tWH);
+ of_property_read_u32(timingnp, "tWC", &ts->tWC);
+ of_property_read_u32(timingnp, "tRP", &ts->tRP);
+ of_property_read_u32(timingnp, "tREH", &ts->tREH);
+ of_property_read_u32(timingnp, "tRC", &ts->tRC);
+ of_property_read_u32(timingnp, "tREA", &ts->tREA);
+ of_property_read_u32(timingnp, "tRHOH", &ts->tRHOH);
+ of_property_read_u32(timingnp, "tCEA", &ts->tCEA);
+ of_property_read_u32(timingnp, "tCOH", &ts->tCOH);
+ of_property_read_u32(timingnp, "tCHZ", &ts->tCHZ);
+ of_property_read_u32(timingnp, "tCSD", &ts->tCSD);
+ banks[bank].timing_spec = ts;
+ }
+ of_property_read_u32(banknp, "st,nand-timing-relax",
+ &banks[bank].timing_relax);
+ bank++;
+ }
+
+ return nr_banks;
+}
+EXPORT_SYMBOL(stm_of_get_nand_banks);
diff --git a/drivers/mtd/nand/stm_nand_dt.h b/drivers/mtd/nand/stm_nand_dt.h
new file mode 100644
index 0000000..de4507c
--- /dev/null
+++ b/drivers/mtd/nand/stm_nand_dt.h
@@ -0,0 +1,39 @@
+/*
+ * drivers/mtd/nand/stm_nand_dt.h
+ *
+ * Support for NANDi BCH Controller Device Tree component
+ *
+ * Copyright (c) 2014 STMicroelectronics Limited
+ * Author: Author: Srinivas Kandagatla <srinivas.kandagatla at st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef STM_NAND_DT_H
+#define STM_NAND_DT_H
+
+#if defined(CONFIG_MTD_NAND_STM_BCH_DT)
+struct device_node *stm_of_get_partitions_node(struct device_node *np,
+ int bank_nr);
+
+int stm_of_get_nand_banks(struct device *dev, struct device_node *np,
+ struct stm_nand_bank_data **banksp);
+#else
+static inline
+struct device_node *stm_of_get_partitions_node(struct device_node *np,
+ int bank_nr)
+{
+ return NULL;
+}
+
+static inline int stm_of_get_nand_banks(struct device *dev,
+ struct device_node *np,
+ struct stm_nand_bank_data **banksp)
+{
+ return 0;
+}
+#endif /* CONFIG_MTD_NAND_STM_BCH_DT */
+#endif /* STM_NAND_DT_H */
diff --git a/include/linux/mtd/stm_nand.h b/include/linux/mtd/stm_nand.h
index 99a69ca..f82f9f7 100644
--- a/include/linux/mtd/stm_nand.h
+++ b/include/linux/mtd/stm_nand.h
@@ -37,6 +37,15 @@ struct stm_nand_bank_data {
int timing_relax;
};
+/* ECC Modes */
+enum stm_nand_bch_ecc_config {
+ BCH_18BIT_ECC = 0,
+ BCH_30BIT_ECC,
+ BCH_NO_ECC,
+ BCH_ECC_RSRV,
+ BCH_ECC_AUTO,
+};
+
struct stm_plat_nand_bch_data {
struct stm_nand_bank_data *bank;
enum stm_nand_bch_ecc_config bch_ecc_cfg;
--
1.8.3.2
More information about the linux-mtd
mailing list