[RFC 10/47] mtd: nand: stm_nand_bch: initialise the Hamming Controller
Lee Jones
lee.jones at linaro.org
Tue Mar 25 04:19:27 EDT 2014
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 7333ad6..8ab8e7b 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -207,6 +207,41 @@ static struct clk *nandi_clk_setup(struct nandi_controller *nandi,
return clk;
}
+static void nandi_init_hamming(struct nandi_controller *nandi, int emi_bank)
+{
+ dev_dbg(nandi->dev, "%s\n", __func__);
+
+ emiss_nandi_select(STM_NANDI_HAMMING);
+
+ /* Reset and disable boot-mode controller */
+ writel(BOOT_CFG_RESET, nandi->base + NANDHAM_BOOTBANK_CFG);
+ udelay(1);
+ writel(0x00000000, nandi->base + NANDHAM_BOOTBANK_CFG);
+
+ /* Reset controller */
+ writel(CFG_RESET, nandi->base + NANDHAM_FLEXMODE_CFG);
+ udelay(1);
+ writel(0x00000000, nandi->base + NANDHAM_FLEXMODE_CFG);
+
+ /* Set EMI Bank */
+ writel(0x1 << emi_bank, nandi->base + NANDHAM_FLEX_MUXCTRL);
+
+ /* Enable FLEX mode */
+ writel(CFG_ENABLE_FLEX, nandi->base + NANDHAM_FLEXMODE_CFG);
+
+ /* Configure FLEX_DATA_READ/WRITE for 1-byte access */
+ writel(FLEX_DATA_CFG_BEATS_1 | FLEX_DATA_CFG_CSN,
+ nandi->base + NANDHAM_FLEX_DATAREAD_CONFIG);
+ writel(FLEX_DATA_CFG_BEATS_1 | FLEX_DATA_CFG_CSN,
+ nandi->base + NANDHAM_FLEX_DATAREAD_CONFIG);
+
+ /* RBn interrupt on rising edge */
+ writel(NAND_EDGE_CFG_RBN_RISING, nandi->base + NANDHAM_INT_EDGE_CFG);
+
+ /* Enable interrupts */
+ nandi_enable_interrupts(nandi, NAND_INT_ENABLE);
+}
+
static void nandi_init_bch(struct nandi_controller *nandi, int emi_bank)
{
dev_dbg(nandi->dev, "%s\n", __func__);
@@ -255,6 +290,7 @@ static void nandi_init_controller(struct nandi_controller *nandi,
int emi_bank)
{
nandi_init_bch(nandi, emi_bank);
+ nandi_init_hamming(nandi, emi_bank);
}
static int remap_named_resource(struct platform_device *pdev,
--
1.8.3.2
More information about the linux-mtd
mailing list