[RFC 02/47] mtd: nand: add ONFI NAND Timing Mode Specifications

[Lee Jones]

This patch adds a new structure, 'nand_timing_spec', to capture the A/C
timing characteristics of NAND devices.

Unfortunately, there is no universally accepted standard for defining
NAND timing parameters. Different datasheets list different sets of
parameters. The ONFI standard gets close, but support is missing from
some of the major NAND manufacturers (e.g. Samsung, Toshiba). Here we
have followed broadly the ONFI timing definitions.

We also provide specifications for the six standard ONFI timing modes,
in terms of the new nand_timing_spec structure. This will allow fully
automated configuration of the timing registers when using
ONFI-compliant NAND.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mtd/nand/nand_ids.c | 165 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mtd/nand.h    |  34 +++++++++
 2 files changed, 199 insertions(+)

diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a87b0a3..12f769d 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -175,6 +175,171 @@ struct nand_manufacturers nand_manuf_ids[] = {
 EXPORT_SYMBOL(nand_manuf_ids);
 EXPORT_SYMBOL(nand_flash_ids);
 
+/*
+ * ONFI NAND Timing Mode Specifications
+ *
+ * Note, 'tR' field (maximum page read time) is extracted from the ONFI
+ * parameter page during device probe.
+ */
+struct nand_timing_spec nand_onfi_timing_specs[] = {
+	/*
+	 * ONFI Timing Mode '0' (supported on all ONFI compliant devices)
+	 */
+	[0] = {
+		.tCLS	= 50,
+		.tCS	= 70,
+		.tALS	= 50,
+		.tDS	= 40,
+		.tWP	= 50,
+		.tCLH	= 20,
+		.tCH	= 20,
+		.tALH	= 20,
+		.tDH	= 20,
+		.tWB	= 200,
+		.tWH	= 30,
+		.tWC	= 100,
+		.tRP	= 50,
+		.tREH	= 30,
+		.tRC	= 100,
+		.tREA	= 40,
+		.tRHOH	= 0,
+		.tCEA	= 100,
+		.tCOH	= 0,
+		.tCHZ	= 100,
+	},
+
+	/*
+	 * ONFI Timing Mode '1'
+	 */
+	[1] = {
+		.tCLS	= 25,
+		.tCS	= 35,
+		.tALS	= 25,
+		.tDS	= 20,
+		.tWP	= 25,
+		.tCLH	= 10,
+		.tCH	= 10,
+		.tALH	= 10,
+		.tDH	= 10,
+		.tWB	= 100,
+		.tWH	= 15,
+		.tWC	= 45,
+		.tRP	= 25,
+		.tREH	= 15,
+		.tRC	= 50,
+		.tREA	= 30,
+		.tRHOH	= 15,
+		.tCEA	= 45,
+		.tCOH	= 15,
+		.tCHZ	= 50,
+	},
+
+	/*
+	 * ONFI Timing Mode '2'
+	 */
+	[2] = {
+		.tCLS	= 15,
+		.tCS	= 25,
+		.tALS	= 15,
+		.tDS	= 15,
+		.tWP	= 17,
+		.tCLH	= 10,
+		.tCH	= 10,
+		.tALH	= 10,
+		.tDH	= 5,
+		.tWB	= 100,
+		.tWH	= 15,
+		.tWC	= 35,
+		.tRP	= 17,
+		.tREH	= 16,
+		.tRC	= 35,
+		.tREA	= 25,
+		.tRHOH	= 15,
+		.tCEA	= 30,
+		.tCOH	= 15,
+		.tCHZ	= 50,
+	},
+
+	/*
+	 * ONFI Timing Mode '3'
+	 */
+	[3] = {
+		.tCLS	= 10,
+		.tCS	= 25,
+		.tALS	= 10,
+		.tDS	= 10,
+		.tWP	= 15,
+		.tCLH	= 5,
+		.tCH	= 5,
+		.tALH	= 5,
+		.tDH	= 5,
+		.tWB	= 100,
+		.tWH	= 10,
+		.tWC	= 30,
+		.tRP	= 15,
+		.tREH	= 10,
+		.tRC	= 30,
+		.tREA	= 20,
+		.tRHOH	= 15,
+		.tCEA	= 25,
+		.tCOH	= 15,
+		.tCHZ	= 50,
+	},
+
+	/*
+	 * ONFI Timing Mode '4' (EDO only)
+	 */
+	[4] = {
+		.tCLS	= 10,
+		.tCS	= 20,
+		.tALS	= 10,
+		.tDS	= 10,
+		.tWP	= 12,
+		.tCLH	= 5,
+		.tCH	= 5,
+		.tALH	= 5,
+		.tDH	= 5,
+		.tWB	= 100,
+		.tWH	= 10,
+		.tWC	= 25,
+		.tRP	= 12,
+		.tREH	= 10,
+		.tRC	= 25,
+		.tREA	= 20,
+		.tRHOH	= 15,
+		.tCEA	= 25,
+		.tCOH	= 15,
+		.tCHZ	= 30,
+	},
+
+	/*
+	 * ONFI Timing Mode '5' (EDO only)
+	 */
+	[5] = {
+		.tCLS	= 10,
+		.tCS	= 15,
+		.tALS	= 10,
+		.tDS	= 7,
+		.tWP	= 10,
+		.tCLH	= 5,
+		.tCH	= 5,
+		.tALH	= 5,
+		.tDH	= 5,
+		.tWB	= 100,
+		.tWH	= 7,
+		.tWC	= 20,
+		.tRP	= 10,
+		.tREH	= 7,
+		.tRC	= 20,
+		.tREA	= 16,
+		.tRHOH	= 15,
+		.tCEA	= 25,
+		.tCOH	= 15,
+		.tCHZ	= 30,
+	}
+};
+EXPORT_SYMBOL(nand_onfi_timing_specs);
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Thomas Gleixner <tglx at linutronix.de>");
 MODULE_DESCRIPTION("Nand device & manufacturer IDs");
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index f7b6a53..0d456b4 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -326,6 +326,40 @@ struct onfi_ext_param_page {
 	 */
 } __packed;
 
+/*
+ * NAND Device Timing Specification
+ *
+ * All values in nano seconds, except where specified.
+ */
+struct nand_timing_spec {
+	int	tR;		/* Max Page Read delay [us]*/
+	int	tCLS;		/* Min CLE setup time */
+	int	tCS;		/* Min CE setup time */
+	int	tALS;		/* Min ALE setup time */
+	int	tDS;		/* Min Data setup time */
+	int	tWP;		/* Min WE pulse width */
+	int	tCLH;		/* Min CLE hold time */
+	int	tCH;		/* Min CE hold time */
+	int	tALH;		/* Min ALE hold time */
+	int	tDH;		/* Min Data hold time */
+	int	tWB;		/* Max WE high to busy */
+	int	tWH;		/* Min WE hold time */
+	int	tWC;		/* Min Write cycle time */
+	int	tRP;		/* Min RE pulse width */
+	int	tREH;		/* Min RE high hold time */
+	int	tRC;		/* Min Read cycle time */
+	int	tREA;		/* Max Read access time */
+	int	tRHOH;		/* Min RE high to output hold */
+	int	tCEA;		/* Max CE access time */
+	int	tCOH;		/* Min CE high to output hold */
+	int	tCHZ;		/* Max CE high to output high Z */
+	int	tCSD;		/* Min CE high to ALE/CLE don't care */
+};
+
+/* ONFI define 6 timing modes */
+#define NAND_ONFI_TIMING_MODES		6
+extern struct nand_timing_spec nand_onfi_timing_specs[];
+
 /**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
  * @lock:               protection lock
-- 
1.8.3.2