[PATCH v2 2/4] mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
Ezequiel Garcia
ezequiel.garcia at free-electrons.com
Fri Mar 21 07:34:48 EDT 2014
Let's make pxa_ecc_init() return a negative errno on error or zero
if succesful, which is standard kernel practice. Also, report the
selected ECC strength and step size, which is important information.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 92b3439..cf7d757 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1353,7 +1353,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
ecc->mode = NAND_ECC_HW;
ecc->size = 512;
ecc->strength = 1;
- return 1;
} else if (strength == 1 && page_size == 512) {
info->chunk_size = 512;
@@ -1362,7 +1361,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
ecc->mode = NAND_ECC_HW;
ecc->size = 512;
ecc->strength = 1;
- return 1;
/*
* Required ECC: 4-bit correction per 512 bytes
@@ -1388,7 +1386,6 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
ecc->size = info->chunk_size;
ecc->layout = &ecc_layout_4KB_bch4bit;
ecc->strength = 16;
- return 1;
/*
* Required ECC: 8-bit correction per 512 bytes
@@ -1403,8 +1400,15 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
ecc->size = info->chunk_size;
ecc->layout = &ecc_layout_4KB_bch8bit;
ecc->strength = 16;
- return 1;
+ } else {
+ dev_err(&info->pdev->dev,
+ "ECC strength %d at page size %d is not supported\n",
+ strength, page_size);
+ return -ENODEV;
}
+
+ dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
+ ecc->strength, ecc->size);
return 0;
}
@@ -1526,12 +1530,8 @@ KEEP_CONFIG:
ret = pxa_ecc_init(info, &chip->ecc, (ecc_strength * 512) / ecc_step,
mtd->writesize);
- if (!ret) {
- dev_err(&info->pdev->dev,
- "ECC strength %d at page size %d is not supported\n",
- ecc_strength, mtd->writesize);
- return -ENODEV;
- }
+ if (ret)
+ return ret;
/* calculate addressing information */
if (mtd->writesize >= 2048)
--
1.9.0
More information about the linux-mtd
mailing list